Preview only show first 10 pages with watermark. For full document please download

Product Catalogue September 2013 /

Rating
Date

October 2018
Size

3.3MB
Views

961
Categories

Vehicles & accessories Motor vehicle accessories & components Car battery chargers

Transcript

Product Catalogue / September 2013 POWER I N N O V AT I O N QUALITY Welcome to the PAG Product Catalogue including links to the PAG online store Here you will find information to help you choose the best portable power and lighting products for a wide range of equipment including broadcast cameras, high-definition digital cinema and 3D camera set-ups, DSLR cameras and handheld camcorders. PAG offers high-performance batteries to meet all your power requirements; chargers that intelligently and efficiently achieve the best from your batteries, even after years of demanding use; and camera lights that give you the correct source of illumination for any professional situation, in the most versatile and economic way. Safety, reliability and durability come as standard. Based in the UK, PAG is the designer and manufacturer of the most technologically advanced power and lighting products for broadcasting organisations, cinematographers, video production companies, equipment hire companies, professional videographers, the military, and civil authorities. When you buy a PAG product you enter into a partnership with a company that will support you throughout that product’s lifetime, into your next purchase, and right through your professional career. What is more, PAG’s superior technology, product longevity, service support and guarantee ensure the best value for money in the industry. Industry Pioneers CONTENTS PAG began designing and manufacturing production and post-production equipment for the film industry over 40 SYSTEMS DIAGRAM 4 PAGLINK SYSTEM 5 years ago. During the 1980s the demand for power for the first portable electronic cameras led the company into the Broadcast Television arena. PAGlink Batteries 7 • PAG introduced PAGlok, one of the industry’s earliest PAGlink PowerHub 8 PAGlink PL16 Charger 9 battery mounting systems, which is still used today. • PAG pioneered microcomputer-controlled fast-charging for broadcast camera batteries with the introduction of PAG ACS (Advanced Charging System). It had previously been believed that fast-charging was dangerous and would result in reduced battery life. PAG proved the PAGlink Cube & Micro Chargers BATTERIES 10 11 PAG’s Total Battery Design Philosophy 11 PAG L96T Time Batteries 13 PAG L96e Batteries 14 PAG ZL-Series Batteries 15 Pagbelt NMH 16 Powerman Batteries 17 opposite was possible. Premier Quality It is PAG’s intention to create the highest quality product for the market. Safety, reliability and durability are the prime concerns at all stages of a product’s development. CHARGERS 18 The name ‘PAG’ on a battery, charger or light is an assurance that only the highest-quality materials have been used in its PAG Chargers Extend Battery Life 18 construction, and that it has been designed to have the PAG Cube Chargers 19 PAG Rack-Mountable Chargers 20 PAG Universal Chargers (PAGlok, NP1 etc) 21 PAG 30V Chargers 22 PAG Charger Adaptors & Updates 23 longest possible service life. Technological Innovation PAG has always maintained its own Research & Development facility, which has enabled the company to develop the world-leading technology that is embodied throughout its product range today: • PAGlink is the only battery system that enables you LIGHTING 24 Standard Paglight (12V) 25 Standard Paglight Accessories 28 Standard Paglight Kits 29 Mini Paglight (12V) 30 Paglight C6 (6V) 31 Paglight 250W 32 Mounting Options (all Paglights) 33 to link multiples of batteries for charge or discharge. • PAG’s unique charging software is the best for extending battery life. • Paglight is the only halogen, HMI and LED on-board camera light. CAMERA SUPPORTS 34 PAG can adapt or develop its products to the specific CAMERA POWER SUPPLIES 35 requirements of your organisation’s working preferences. POWER SOLUTIONS FOR DSLR & DIGITAL CINEMA 36 POWER SOLUTIONS FOR HANDHELD CAMCORDERS 37 BATTERY MOUNTS & MOUNT ADAPTORS 38 Bespoke Power This bespoke service is possible because PAG is the originator, designer and manufacturer of its products. PAG’s specialist knowledge and experience is invaluable in helping you achieve the perfect portable power and camera Dual Battery Mounts 39 CONTINUOUS POWER UNITS 40 RADIO MIC RECEIVER BRACKETS 40 CABLES & CONNECTORS 41 LI-ION TRANSPORT INFORMATION 42 GUARANTEE AND SERVICE 43 lighting system for your company. Worldwide Availability PAG products are available via a worldwide network of companies and agents as well as our on-line sales service at www.paguk.com 04 PAG Advanced Battery Systems NEW PAGLINK SYSTEM Link batteries for longer run-times or a higher current draw PAGlink Chargers are also suitable for PAG standard V-Mount batteries 9303 PL96e Battery 9304 PL96T Time Battery 9709 PowerHub 4 x D-Tap outputs and a USB module 9707 PL16 Charger charge up to 16 batteries simultaneously 9708 PL Cube Charger charge up to 16 batteries simultaneously 9710 PAGlink Micro Charger PAG STANDARD V-MOUNT SYSTEM 9510 Gold Mount to V-Mount Adaptor Power Plate dual battery mount for V-Mount batteries to V-Mount, PAGlok or Gold Mount PAGlink Chargers 9707, 9708 & 9710 (see above) are also suitable for PAG standard V-Mount batteries 9305V L96T Time Battery 9317V ZL-125 Time Battery 9522/-V V-Mount Connector 9310V L96e Battery 9750V CPS100 On-Camera Power Supply 100W 9512 PAGlok to V-Mount Adaptor 9315V ZL-50 Battery 9316V ZL-150 Battery 9702V PAG Cube 4-channel simultaneous charger PAGLOK SYSTEM 9513 V-Mount to PAGlok Adaptor Power Plate dual battery mount for PAGlok batteries to V-Mount, PAGlok or Gold Mount 9702 PAG Cube 4-channel simultaneous charger 9305 L96T Time Battery 9317 ZL-125 Time Battery 9522/PAGlok Connector 9518 Gold Mount to PAGlok Adaptor 9792 AR124PLD 9750 CPS100 On-Camera Power Supply 100W 9310 L96e Battery 9315 ZL-50 Battery 9316 ZL-150 Battery 9752 Quasar/PSU 9726 Quasar PAG GOLD-MOUNT SYSTEM 9552V Power Plate dual battery mount for V-Mount batteries to camera with Gold Mount The latest PAG Gold Mount batteries are compatible with Anton Bauer Li-Ion Chargers 9795 PULSAR 9552 Power Plate dual battery mount for PAGlok batteries to camera with Gold Mount 9305A L96T Time Battery 9310A L96e Battery 9753 QUASAR/PSU 9727 QUASAR PAGlink_more power than any other system 05 PAGlink System ...is a new system of intelligent, high-power, linking batteries designed to power the wide variety of cameras used throughout the broadcast and video production industry today. The PAGlink System gives you: • More power for cameras and accessories Link-Up + Power-Up Link two batteries to provide 192Wh, or three batteries for 288Wh. • More efficient, linked battery charging • More outputs for camera accessories • Flight-friendly, UN tested batteries that can be legally transported by passenger aircraft without quantity restriction • Smarter, smaller, lighter V-Mount battery units • Batteries that can be linked in greater numbers (up to 8), and in any state of charge, to combine capacities for extended run-times • Batteries with the ability to sustain high-current loads of up to 12A • Constant power from hot-swapping batteries Link-Up and Charge Up to 16 batteries can be charged simultaneously on a two-position charger. • The ability to charge up to 16 linked batteries, from any state of charge, on one charger • An inexpensive charger designed for light travel • Built-in battery run-time display (numeric or 5 LED options) • Batteries that are auto-compatible with multiple camera data and in-viewfinder capacity indication systems (Sony, Red, etc) • Batteries that provide usage and performance data, via a reading device, for easier battery management • Future proof and externally programmable batteries and chargers • Improved low temperature battery performance • Fail-safe electronic battery protection, with Parylene coated circuits Power More Accessories The PowerHub provides 4 D-Tap outputs and a USB module for your smartphone. • A 2 year guarantee, with no restrictive conditions • The best value for money battery system in the industry 06 PAGlink_more power than any other system Power for all cameras Run-time indication PAGlink has been designed to power a wide range of professional cameras and equipment used by broadcast television stations, hire facilities and production companies, such as: standard or highdefinition shoulder-mounted cameras, high-end 4K digital cinema and 3D camera set-ups, DSLR cameras and handheld camcorders. All PAGlink batteries feature builtin run-time indication. You can choose between the easy-to-read numeric display of the PL96T Time Battery or the 5 LED indicator of the lower-cost e-series PL96e battery. Both show battery capacity as a percentage. When batteries are linked, the display provides run-time for the total of all the batteries, and capacity for the individual packs. The different battery versions can be mixed, enabling you to add the numeric Time Battery display to the lower-cost e-series batteries. Link multiples of batteries PAGlink is a system of smarter, smaller and lighter Li-Ion batteries. It is the only system that allows you to link multiples of batteries in parallel for charge or discharge. Linking the batteries combines capacities, greatly extending run-time and allowing a highcurrent draw of up to 12A. PAGlink batteries incorporate heavy duty contacts, engineered for high-load applications. Two or more batteries can be linked on your camera. Three linked batteries, weighing less than 2.2kg, create a single power source of nearly 288 watt-hours. The individual battery units have capacities of 96 watthours, enabling them to be legally transported by passenger aircraft without quantity restriction. More outputs for accessories PAGlink is the first battery system where power is also available from the battery linking contacts. The power can be accessed via the PAGlink PowerHub, and used for audio, lighting, monitoring and transmission accessories. The PowerHub can be situated between two PAGlink batteries, to preserve the hot-swap capability, or connected to the rear battery on the camera, to allow the mounting of an accessory bracket. It provides up to four 12V DC outputs via D-Tap connectors (Hirose and 2.1mm PP90 DC connector units are also available). The plug-in connectors allow you to reposition the output to the left or right side of the camera. A USB module is incorporated for charging your smartphone. Viewfinder capacity display PAGlink batteries incorporate 78% viewfinder display recognition software that supports multiple camera data systems (Sony, Red, IDX and Anton-Bauer). This enables linked batteries to communicate their collective state of charge for display in the camera viewfinder. The batteries adapt automatically to each system. Electronic protection PAGlink batteries incorporate PAG’s multi-level proprietary electronic protection system and have Parylene coated internal circuits to guard against the effects of electrolyte leakage (see Page 11). Air transport The PAGlink system has been conceived so that you can fly with the high-capacity battery power that you need. The 96 watt-hour PAGlink battery packs have been independently tested in accordance with UN air transport safety regulations. This means that unlike batteries that have capacities greater than 100 watt-hours, and those that have not been tested, PAGlink batteries can be legally transported on passenger aircraft, without quantity restriction. Comparison of Linking Battery Systems Charging versatility PAGlink batteries can be charged individually or linked, using any reputable V-Mount Li-Ion charger, an industry first. New PAGlink chargers will charge simultaneously up to 16 PAGlink batteries, from any state of charge. The PAGlink PL16 has two charging positions and will charge 8 linked batteries on each. The new PAGlink Cube will charge 4 batteries on each position. Eight fully-discharged batteries will be fully-charged in 10 hours. Now all your batteries can be charged overnight without you having to set an alarm to put more batteries on charge. The PAGlink Micro Charger is ideal when you want to travel light and is small enough to fit any kit bag. It will fully charge two PAGlink batteries in approximately 7hrs. IDX Powerlink HL9 PAGlink PL96e 88Wh 96Wh Current Draw 10A 12A High-current pin contacts No Yes Run-Time Indication No Yes IDX only Sony, IDX, Anton-Bauer & Red 2 8 0.74kg 0.73kg 140 x 85 x 58mm 133 x 84 x 50mm Charge linked No Yes External linking latch No Yes Capacity Viewfinder Display Number of batteries that can be linked Weight Dimensions PAGlink_more power than any other system 07 • A power solution for all camera types • Smarter, smaller and lighter Li-Ion batteries • Link up to 8 batteries, in any state of charge, for charge or discharge • Travel without quantity restriction • Higher capacities and longer run-times • Draw up to 12A when linked, ideal for high-current set-ups • Built-in run-time indication • Compatible with multiple camera data systems that display capacity in the viewfinder • Hot-swap for constant power • Charge batteries individually or linked using any reputable V-Mount Li-Ion charger A Truly Intelligent Digital Battery System When linked, PAGlink batteries form a high-speed network, allowing the batteries to communicate with each other and safely managing output. Linked batteries report to the camera or charger as one large battery. The battery that is directly connected to the camera becomes the ‘master’ and automatically determines which batteries are most suitable to bring on-line for discharge, according to their charge status. PAGlink is the first battery system that includes the linking contacts in the output line. Power for camera accessories can be accessed using the PAGlink PowerHub (see Page 8). The first ‘master’ battery adds or removes power from the output line Communication PL96e Battery / V-Mount PL96T Time Battery / V-Mount PAGlink Battery Reader • 96 watt-hours, 14.8V 6.5Ah • 12A 135W maximum discharge when linked (8A 90W individually) • 5 LED run-time indicator • Auto-compatible with multiple camera data systems and viewfinder capacity displays • Chargers: PL16 (9707), PL Cube (9708), PL Micro Charger (9710), or Sony Li-Ion charger • 133 x 84 x 50mm / 0.73kg • 96 watt-hours, 14.8V 6.5Ah • 12A 135W maximum discharge when linked (8A 90W individually) • Numeric run-time display • Auto-compatible with multiple camera data systems and viewfinder capacity displays • Chargers: PL16 (9707), PL Cube (9708), PL Micro Charger (9710), or Sony Li-Ion charger • 133 x 84 x 50mm / 0.73kg Model 9303 Model 9304 • Reveal data stored in the battery’s microprocessor: state of charge, available capacity, cell temperature, number of cycles, voltage, full capacity, date of manufacture and software version (see Page 12) • Manage a large battery inventory • Track battery usage • Track battery performance • Easy-to-understand alphanumeric display • For use with PAGlink batteries, V-Mount L96T, L96e, L95e and Sony Professional Info Batteries • 77 x 52 x 28mm / 50g International Patents Applied For Model 9647 08 PAGlink_more power than any other system PL96T_Numeric Run-Time & Capacity Display The PL96T Time Battery incorporates a numeric display which, at the press of a button, shows run-time against load. Two button presses on load displays run-time in hours and minutes One button press on or off load shows remaining capacity as a percentage When batteries are linked, run-time is shown for the total of all batteries, while capacity is shown for each individual battery. When the battery is fully charged the display indicates as above When the battery is fully discharged the display indicates as above PL96e_5 LED Run-Time & Capacity Indicator Capacity is displayed as a percentage (each LED = 20% approx.) 1 LED flashing = less than 10% of capacity available. When batteries are linked, run-time is shown for the total of all batteries, while capacity is shown for each individual battery. Two button presses on load activates the time display. The ‘HRS’ LED flashes twice. The ‘MINS’ LED then flashes twice. The number of hours is indicated by the number of lit LEDs: The number of minutes is indicated: 1 LED = 10 mins. 1 LED = 1 hour. PAGlink PowerHub_all the outputs you need More Power for Camera Accessories PAGlink contacts Plug-in output socket USB Module Position the PowerHub between batteries, to maintain the hot-swap feature, or on the rear battery, to enable the mounting of an accessory holder. PAGlink batteries are designed for powering simultaneously a camera and multiple accessories. Linked batteries provide up to 12A for power-hungry set-ups. PAGlink is the first battery system that makes power available from the battery linking contacts. The low-profile, lightweight PAGlink PowerHub, sandwiched between two batteries, provides the outputs you need for powering a camera light, a monitor, audio and transmission accessories. The PowerHub incorporates four 12V DC outputs via D-Tap connectors (Hirose and PP90 connectors are also available). The plug-in connectors are interchangeable and allow you to reposition the output to the left or right side of the camera. A USB output module (1A, 5V) is also incorporated for charging your smartphone. PAGlink PowerHub • 4 x 12V DC outputs (D-Tap) • 1 x USB module (1A, 5V) • 83 x 112 x 18mm overall (12mm deep when between batteries) / 100g Hirose (4-pin) 2.1mm (PP90) D-Tap • For powering 12V camera accessories. • For powering 12V camera accessories. • For powering 12V camera accessories. Model 9709 Model 9709H Model 9709P Model 9709D PAGlink PL16 Charger_linked battery charging 09 • Fast-charge PAGlink batteries from any state of charge, individually or linked - an industry first CHARGERS • Charges up to 16 batteries simultaneously (8 on each position) • Charge 8 batteries overnight • No more midnight battery swapping • High power output • Quiet and cool-running • Ultra-compact, lightweight and robust construction • 100W camera power supply • Ideal for location use • Accepts firmware upgrades via battery connectors • Worldwide operation Fast, efficient, linked battery charging The unique PAGlink system allows up to eight batteries to be linked and charged as one. The PAGlink PL16 two-position charger is capable of simultaneously charging up to 16 PAGlink batteries (8 on each position). At the end of a shoot, simply link the discharged batteries, and connect them to the charger. By the morning, all your batteries will be charged and ready to use. The batteries form a high-speed network, communicating with each other to manage the charging process, which is fully automatic. The charger uses the available power efficiently and intelligently to achieve fully charged batteries as quickly and safely as possible. • The most-discharged batteries are given priority. • Batteries can be in any state of charge (non-PAGlink chargers require all linked batteries to be within 40% state-of-charge). • Fully charged batteries will stop accepting charge automatically and independently of other batteries. • During charging, the charge status of each PAGlink battery is shown on its own display, so that you can see at a glance which batteries are ready to use. • 8 fully-discharged batteries will be fully-charged in less than 12hrs (see Charge Times below). Intelligent Parallel Charging This high-powered charger is capable of supplying 6A at 16.8V, approximately 100W. Charging is fast, efficient and fully-automatic thanks to PAG's unique Intelligent Parallel Charging. PAG iPC software incorporates three phases: Phase 1 Pre-Charge: Prepares batteries that have been shut down or deeply discharged for charge acceptance. Phase 2 Testing: Determines the type and state of charge of the batteries, and the maximum current that can be applied. Phase 3 Charging: The charger then shares the current intelligently between the channels, briefly addressing the most discharged batteries first, before simultaneously fullycharging all batteries as quickly and efficiently as possible. Charge Times: For fully-discharged 96Wh PAGlink batteries Ch1 Ch2 Total Time 1 1 2 3 4 8 1 2 3 4 8 1 2 4 6 8 16 2 hrs 3 hrs 6 hrs 9 hrs 11 hrs 24 hrs PAGlink PL16 Charger 30 mins 30 mins 45 mins • 2 x V-Mount connectors • Intelligent Parallel Charging for up to 16 PAGlink batteries (8 on each position) • Intelligent Parallel Charging for latest PAG and Sony Li-Ion batteries • Sequential charging for older PAG batteries • Built-in 100W camera power supply • 75 x 210 x 50mm / 1.4kg Model 9707 10 PAGlink Cube_4-position linked battery charging • Fast-charge PAGlink batteries from any state of charge, individually or linked • Charge up to 16 batteries simultaneously (4 on each position) • Eight batteries can be charged overnight • No more midnight battery swapping • PAG Intelligent Parallel Charging • Ideal for location use • Quiet and cool-running • Ultra-compact, lightweight and robust construction • Retractable handle • Worldwide operation • Accepts firmware upgrades via battery connectors PAGlink Micro Charger_ultra-compact • World’s smallest, single position multi-battery V-Mount charger • Fits any kit bag and suits any budget • Designed for PAGlink and standard V-Mount Li-Ion batteries • Interchangeable plug adaptors and 100-240V AC input for use worldwide • The charge status of each battery is shown on its individual display • 2 fully discharged, linked batteries will be fully charged in 7hrs • 1 fully discharged PAGlink battery will be 80% charged in 3hrs PAGlink Cube Charger PAGlink Micro Charger Micro Charger Plug Adaptors • 4 x V-Mount connectors • Intelligent Parallel Charging for linked PAGlink batteries, up to 4 on each position • Intelligent Parallel Charging for the latest PAG and Sony Li-Ion batteries • Sequential charging for older PAG Li-Ion batteries, and Ni-MH batteries • 157 x 157 x 157mm / 1.19kg • 1 x V-Mount charging shoe • Intelligent Parallel Charging for up to 4 linked PAGlink batteries • Suitable for all PAG and Sony V-Mount Li-Ion batteries • Includes plug adaptor for country of use • 110 x 87 x 58mm (boxed) / 0.2kg • UK AC plug for PAGlink Micro Charger Model 9708 Model 9710 Model 9710U • Euro AC plug for PAGlink Micro Charger Model 9710E • US/Japan AC plug for PAGlink Micro Charger Model 9710J • Australia AC plug for PAGlink Micro Charger Model 9710A PAG’s Total Battery Design Philosophy 11 Batteries Technologically Advanced PAG batteries are the most technologically advanced in the industry. They incorporate many unique proprietary features designed to assist the cameraman and prolong battery life. They are manufactured to withstand the strains and stresses of use in the harshest environments, and to perform consistently over their natural lifetime. PAG uses only the highest quality components in the construction of its batteries. Safety, reliability, and durability are the prime concerns, from conception to final assembly. Compatibility PAG has always embraced universality. It is the only manufacturer that offers products that are compatible with four popular battery mounting systems: V-Mount, PAGlok, Gold Mount and NP1. PAG also offers mount adaptors that enable you to convert systems. PAG’s cell testing programs continuously assess all relevant cells from reputable manufacturers and the company selects the best using a number of criteria, including headline capacity, cycle life, voltage hold-up under load, and most importantly, safety. However, safety and reliability are not merely determined by the choice of cell - it is the total battery design philosophy that is most important. No Cell-Imbalance The Li-Ion cells are matched to extremely close tolerances so that the battery pack is perfectly balanced. Severely imbalanced batteries can leak electrolyte and Li-Ion cells cannot be rebalanced after assembly. The low-resistance inter-cell nickel strapping and cell layout are constructed to optimize current sharing, reducing one of the common causes of cell-imbalance, and shorter battery life. Why Li-Ion? Modern cameras and working conditions require lightweight, reliable batteries, with extended run-times, longer cycle lives and accurate run-time information. PAG Li-Ion batteries are designed to meet these requirements. They utilise advanced, high quality Li-Ion cell technology that possesses a high energy density, making it particularly well suited to powering a wide range of modern cameras. Two 96 watt-hour PAG Li-Ion batteries will provide enough power for a day’s shooting for most broadcast camera set-ups that include an on-board light. PAG Li-Ion batteries are the most compact examples available and can be transported easily in your camera bag. PAGlink Li-Ion batteries can be linked to provide a higher current draw (up to 12A), which is often required for powering highdefinition cameras and multiple camera accessories. One of the benefits of Li-Ion technology is the low self-discharge rate. This means that batteries do not have to be topped-up if they have not been used for a few days. There is also no ‘memory effect’ as Li-Ion batteries do not suffer long term problems as a result of partial charging and discharging. Latest Cell-Technology PAG uses only the latest, premium quality, branded Li-Ion cells in its products. High quality cells are a vital prerequisite to the creation of a safe Li-Ion battery. Low quality cells, which have crept into our industry, are susceptible to internal shorts. The name ‘PAG’ on a battery is an assurance that only the highest quality materials have been used in its construction. PAG is Synonymous with Safety PAG invests a great deal of time and money designing and manufacturing safe battery systems which meet very stringent technical requirements. PAG ensures that the battery is allowed to operate only within strict limits. PAG could allow higher charging voltages, and lower discharge voltages, which would create a battery with a slightly higher capacity. PAG could also allow a higher current to be drawn, however, the result would be reduced battery life and an increased chance of electrolyte leakage. Accordingly, the battery’s internal protection circuits and the sophisticated protection software have been set conservatively, with safety and battery longevity as the prime considerations. PAG’s electronic protection system guards against: over-voltage, under-voltage, over-current, over-charge, over-discharge, overtemperature, under-temperature and inappropriate charge sources. The protection circuits are fast-acting, and able to withstand highvoltage transients and reverse voltages. Multiple levels of safety, backed-up with proven software driven mechanisms, are included so that safe operation is not totally dependent upon the continual operation of a single protection circuit. The circuit boards within the battery are designed so that all points of high voltage are separated by the maximum possible isolation gap, thereby negating the chances of a problem even if electrolyte were to leak across the board. 12 PAG’s Total Battery Design Philosophy As a final, absolute protection against electrolyte leakage, the circuit Easier Battery Management boards are completely coated with Parylene, a conformal coating that PAG makes it easier for you to manage your battery inventory by providing a Battery Reader that reveals usage and performance data, stored in the battery’s microprocessor. is usually reserved for specialist aerospace and medical applications. In long-term tests, Parylene was the only circuit coating material which was not softened and eventually penetrated by the cell electrolyte. This expensive, but essential process is unique to PAG batteries and effectively guarantees that there will not be a fire in the event of electrolyte leakage. Polycarbonate Cases The mechanical design of the battery provides protection in the event of accident or abuse, cradling the cells against damaging shock and vibration. PAG battery cases are manufactured from high-impact, injection-moulded polycarbonate. The material is inherently very strong (it is used for motorcycle crash helmets) and is unaffected by the solvent powers of the battery electrolyte. Commonly used materials, such as ABS, are dissolved and weakened by the electrolyte. PAG cases also feature non-slip external features for secure handling. The PAGlink Battery Reader is a compact and lightweight tool that you slide onto the contacts of the battery. It features an easy-tounderstand alphanumeric display and up/down buttons that will firstly reveal the following data: 1. 2. 3. 4. 5. 6. 7. 8. State of charge as a percentage Available capacity in ampere-hours Cell temperature in degrees Celsius Number of charge/discharge cycles Voltage Full capacity in ampere-hours Date of birth (manufacture) Software version Run-Time & Capacity Displays PAG’s revolutionary integral battery run-time and capacity display technology is the most advanced in the industry, and was developed at a time when the LED ‘fuel-gauge’ was state-of-the-art. PAG Time Batteries incorporate a numeric run-time and capacity display that is more accurate than any other available. It provides a continually updated prediction of remaining equipment run-time, on load, displayed numerically, to a resolution of 1 minute. The Reader is compatible with PAGlink Batteries, standard PAG V-Mount Li-Ion batteries (L96T, L96e, L95e) and Sony V-Mount Professional Info Batteries. Upgradeable Firmware PAG batteries are firmware upgradeable, so that the program can be updated in the field in a matter of seconds, without the need to open the battery case. A Battery Programmer can be obtained from PAG or your PAG distributor. Charger Communication & Longer Battery Life The battery’s internal processor achieves this by taking into account the changes of load that occur during use, the charge status and condition of the cells, and the ambient temperature. PAG is the only company to have achieved this. The accuracy of the display is maintained by tracking the performance of the cells, and adjusting the calibration values to compensate for their ageing. This means that the batteries do not require a periodic ‘service charge’ in order to maintain display accuracy. PAG’s lower-cost e-series batteries incorporate a 5 LED capacity indicator that is able to show percentage state-of-charge, and run-time on load, to a resolution of 10 minutes. In-Viewfinder Battery Status Display Battery status can be shown as a 78% percentage of available capacity in the viewfinders of cameras designed to accept this data. Different data standards are used by camera and battery manufacturers. PAGlink batteries, PAG L96T and L96e batteries adjust the data output standard to support Sony (SMB), IDX (I2C), Red (reversed SMB) and Anton-Bauer (Analogue 0V to 5V) automatically. PAG Li-Ion batteries incorporate an integral digital communication system which speaks to PAG chargers and determines the right charge regime for the battery; thereby achieving the maximum capacity safely, and ensuring a longer battery cycle life. UN Testing PAG Li-Ion batteries are tested, by an independent test facility, for compliance with UN transport safety regulations, a requirement of air transport and civil aviation authorities (see Page 42). Testing is required because poorly constructed Li-Ion batteries have been known to break down internally and selfignite. A test report for each of PAG’s Li-Ion batteries, and not just the individual cells, can be obtained from PAG Ltd. Exemplary Service and Technical Support PAG provides full technical support throughout a product’s lifetime. The quality of this back-up service is second-to-none because PAG is the concept originator, design authority and manufacturer of its products. It is one of the main reasons why broadcast organisations choose PAG. PAG L96T Time Batteries_numeric Run-Time Display 13 • High quality Li-Ion broadcast batteries • High capacity and long life cells • 8A maximum continuous output • Numeric run-time and capacity display • V-Mount, PAGlok and Gold Mount models • Multi-camera in-viewfinder capacity indication • 96 watt-hour capacity • Advanced electronic protection system • Circuits Parylene coated • No ‘service charge’ required • Reset after cut-out with display button • Combine capacities to create a 192Wh power source using a PAG Power Plate • UN tested and IATA compliant • 2 year guarantee Numeric Run-Time & Capacity Display The PL96T Time Battery incorporates a numeric display which, at the press of a button, shows run-time against load. Two button presses on load displays run-time in hours and minutes One button press on or off load shows remaining capacity as a percentage When the battery is fully charged the display indicates as above When the battery is fully discharged the display indicates as above PAG L96T Time Battery / V-Mount PAG L96T Time Battery / PAGlok PAG L96T Time Battery / Gold Mount • • • • • • • • 96 watt-hours, 14.8V 6.5Ah 8A 90W maximum discharge Numeric run-time and capacity display Auto-compatible with multiple camera data systems and viewfinder capacity displays • Chargers: Cube (9702), RMC4X (9702R) AR124PLD, Quasar (9726, 9752) • 130 x 86 x 42mm / 0.75kg • • • • Model 9305 Model 9305A 96 watt-hours, 14.8V 6.5Ah 8A 90W maximum discharge Numeric run-time and capacity display Auto-compatible with multiple camera data systems and viewfinder capacity displays • Chargers: PL16 (9707), PL Cube (9708), PL Micro Charger (9710), Cube (9702V), RMC4X (9702VR), and Sony Li-Ion chargers • 130 x 86 x 47mm / 0.75kg Model 9305V 14.8V 6.5Ah, 95 Watt-Hours 8A 90W maximum discharge Numeric run-time and capacity display Auto-compatible with multiple camera data systems and viewfinder capacity displays • Chargers: Anton Bauer Li-Ion, PAG Pulsar (9795), Quasar (9727, 9753) • 130 x 86 x 52mm / 0.76kg 14 PAG L96e_high quality Li-Ion batteries • High quality Li-Ion broadcast batteries • High-capacity and long-life cells • 8A maximum continuous output • 5 LED run-time and capacity indicator • V-Mount, PAGlok and Gold Mount models • Multi-camera in-viewfinder capacity indication • 96 watt-hour capacity • Advanced electronic protection system • Circuits Parylene coated • No service charge required • Reset after cut-out with display button • Combine capacities to create a 192Wh power source using a PAG Power Plate • UN tested and IATA compliant • 2 year guarantee 5 LED Run-Time & Capacity Indicator Capacity is displayed as a percentage (each LED = 20% approx.) 1 LED flashing = less than 10% of capacity available. Two button presses on load activates the time display. The ‘HRS’ LED flashes twice. The number of hours is indicated by the number of lit LEDs: 1 LED = 1 hour. The ‘MINS’ LED then flashes twice. The number of minutes is indicated: 1 LED = 10 mins. PAG L96e Battery / V-Mount PAG L96e Battery / PAGlok PAG L96e Battery / Gold Mount • • • • • • • • 96 watt-hours, 14.8V 6.5Ah 8A 90W maximum discharge 5 LED Run-Time & Capacity Indicator Auto-compatible with multiple camera data systems and viewfinder capacity displays • Chargers: Cube (9702), RMC4X (9702R) AR124PLD, Quasar (9726, 9752) • 130 x 86 x 42mm / 0.75kg • • • • Model 9310 Model 9310A 96 watt-hours, 14.8V 6.5Ah 8A 90W maximum discharge 5 LED Run-Time & Capacity Indicator Auto-compatible with multiple camera data systems and viewfinder capacity displays • Chargers: PL16 (9707), PL Cube (9708), PL Micro Charger (9710), Cube (9702V), RMC4X (9702VR), and Sony Li-Ion chargers • 130 x 86 x 47mm / 0.75kg Model 9310V 96 watt-hours, 14.8V 6.5Ah 8A 90W maximum discharge 5 LED Run-Time & Capacity Indicator Auto-compatible with multiple camera data systems and viewfinder capacity displays • Chargers: Anton Bauer Li-Ion, PAG Pulsar (9795) Quasar (9727, 9753) • 130 x 86 x 52mm / 0.76kg PAG ZL-Series_zero-lithium travel-packs 15 • Zero-Lithium travel packs enable you to avoid air-travel restrictions on batteries • 10A current draw capability • 150Wh, 125Wh or 50Wh capacities • High-capacity and long-life Ni-MH cells • Numeric run-time and capacity display (ZL-125 only) • V-Mount, PAGlok and NP1 models • 18 month guarantee The Latest Ni-MH Technology Air Transportation PAG ZL-Series batteries employ the latest Ni-MH cell-technology, which has greatly improved since its introduction to the industry more than a decade ago. Customers can now expect a longer cycle life, especially if batteries are always charged with PAG chargers. Certain airlines have refused to let Li-Ion ENG batteries on-board aircraft in hand luggage, despite legitimate air safety certification that proves compliance with IATA regulations for lithium content and United Nations testing. For this reason, PAG has introduced ZL-Series Travel Packs, a range of flight-friendly batteries that contain zerolithium, and are always welcome aboard. PAG ZL-150 / V-Mount PAG ZL-125 / V-Mount PAG ZL-50 / V-Mount PAG ZL-NP • 150 watt-hours, 14.4V 10Ah • 8A maximum discharge • Chargers: Cube (9702V), RMC4X (9702VR) • 208 x 125 x 52mm / 2.35kg • 125 watt-hours, 13.2V • 8A maximum discharge • Numeric run-time and capacity display • Chargers: Cube (9702V), RMC4X (9702VR) • 208 x 125 x 52mm / 2.2kg • • • • • • • • • Model 9316V 50 watt-hours, 14.4V 3.2Ah 7A maximum discharge 4 LED capacity indicator Chargers: Cube (9702V), RMC4X (9702VR) • 130 x 86 x 47mm / 0.88kg Model 9315V Model 9317V PAG ZL-150 / PAGlok PAG ZL-125 / PAGlok PAG ZL-50 / PAGlok • Chargers: Cube (9702), RMC4X (9702R), AR124PLD, Quasar (9726, 9752) • 208 x 125 x 44mm / 2.35kg • Chargers: Cube (9702), RMC4X (9702R) AR124PLD, Quasar (9726, 9752) • 208 x 125 x 44mm / 2.2kg • Chargers: Cube (9702), RMC4X (9702R), AR124PLD, Quasar (9726, 9752) • 130 x 86 x 42mm / 0.88kg Model 9316 Model 9317 Model 9315 40 watt-hours, 13.2V 3Ah 7A maximum discharge 4 LED capacity indicator Charger: AR124NPD (9793) 71 x 182 x 25mm / 0.73kg Model 9314 16 Pagbelt NMH_for broadcast cameras or 24V/30V lighting • High quality Ni-MH battery belts • Top quality, deep-moulded leather pockets • 12V, 13.2V, and 14.4V models for powering lighting and cameras • 24V and 30V models for powering lighting • High capacity and long-life cells • Over-Discharge Protection prevents cell imbalance and extends battery life • Integral overnight charger • Widerange AC input for worldwide operation • 10 year guarantee on leather cases The Latest Ni-MH Technology Pagbelt NMH battery belts employ the latest Ni-MH cell technology, which has greatly improved since its introduction to the industry over a decade ago. Customers can now expect a longer cycle life, especially if the battery belt is always charged with PAG chargers. Ouput from the the Pagbelt NMH is via two XLR4F connectors, ideal for powering both a camera and an on-board light. Fast-charge the 24V and 30V Pagbelt NMH using PAG 30V AR Series chargers. Fast-charge the 24V and 30V Pagbelt NMH using PAG 30V AR Series chargers (single channel Model 9763, and four-channel Model 9765) see Page 22. Pagbelt NMH 24V 10Ah Pagbelt NMH 12V 10Ah Pagbelt NMH 14.4V 10Ah • • • • • • • • • 14.4V 10Ah, 144 Watt-Hours • 3.0kg 24V 10Ah, 240 Watt-Hours Output via 2 x XLR4 connectors Over-discharge protection Integral Overnight Charger (100V-250V AC input) • Fast-charge using a PAG 30V AR Series charger (see Page 22) and charge lead XLR4F to XLR4M Model 9449 • Clip-on shoulder harness included • 4.7kg 12V 10Ah, 120 Watt-Hours Output via 2 x XLR4 connectors Over-discharge protection Integral Overnight Charger (100V-250V AC input) • Fast-charge using any PAG universal charger and charge lead PP90M to XLR4M Model 9455 • 2.6kg Model 9212 Model 9224 Pagbelt NMH 13.2V 10Ah Pagbelt NMH 30V 10Ah • 30V 10Ah, 300 Watt-Hours • 5.5kg Model 9230 • 13.2V 10Ah, 132 Watt-Hours • 2.8kg Model 9213 Model 9214 PAG Powerman_12V to 30V 7Ah lighting batteries 17 • High quality 7Ah Ni-Cd power source for hand-heldlocation lighting • 12V, 13.2V, 24V and 30V models • XLR4 output connectors • Curved body pad for heavier models • Features rounded edges designed for comfort while carrying • Waist belt with anti-slip feature • High quality cells with excellent voltage hold-up characteristics • End of discharge indicator • Over-Discharge Protection prevents cell imbalance and extends battery life • PAG 30V AR Series charger recommended 30V Powerman with Body Pad Model 9353 12V and 13.2V Powerman batteries feature dual XLR4M output connectors All Powerman batteries feature detachable shoulder straps Powerman 30V 7Ah Powerman 12V 7Ah Powerman Body Pad • • • • 30V 7Ah, Ni-Cd battery Output via XLR4M connector Over-discharge protection Fast-charge using a PAG 30V AR Series charger (see Page 22) and charge lead XLR4F to XLR4M Model 9449 • 257 x 240 x 81mm / 7.3kg • • • • • Recommended for extended periods of use with 30V and 24V Powerman models Model 9330 Model 9339 Powerman 24V 7Ah Powerman 13.2V 7Ah • 24V 7Ah, Ni-Cd battery • 257 x 240 x 81mm / 6.3kg • 13.2V 7Ah, Ni-Cd battery • 166 x 240 x 81mm / 4.50kg Model 9342 Model 9338 12V 7Ah, Ni-Cd battery Output via 2 x XLR4M connectors Over-discharge protection Fast-charge using a PAG 30V AR Series charger (see Page 22) and charge lead XLR4F to XLR4M Model 9449 • 166 x 240 x 81mm / 4.25kg Model 9353 18 PAG chargers are the secret to extended battery life Chargers PAG Advanced Charging Technology PAG is the pioneer of microcomputer-controlled fast-charging for broadcast industry batteries. PAG chargers are the most versatile and technologically advanced systems available; they are easy to operate and the latest models are fully automatic. The proprietary software that controls charging extends the working life of your batteries beyond anything that can be achieved using other systems. order to detect the its cell chemistry, state of charge, capacity and condition. It then automatically applies the correct regime to achieve a fully charged battery with the maximum capacity and cycle life. A Variety of Features The features of each PAG charger can vary to include either 2 or 4 channels, a built-in camera power supply, and special charging programs: Linked Battery Charging - An Industry First The latest technological advancement from PAG is linked battery charging (see pages 9 & 10). PAGlink batteries can be charged, whilst linked, from any state of charge, using PAGlink chargers. Up to 8 batteries on each position can be charged simultaneously using a single charger. The batteries form a network that manages the charging process. Li-Ion Recovery: PAG chargers will automatically recover PAG Li-Ion batteries if the output has been shut down by the battery’s internal protection circuit. Discharge/Charge: Batteries which have been repeatedly subjected to partial discharging will benefit from the analytic Discharge/Charge program which also measures and displays available battery capacity. PAG Intelligent Parallel Charging PAG’s latest chargers incorporate unique Intelligent Parallel Charging software (iPC), designed for fast-charging simultaneously PAG and Sony Li-Ion batteries. The program prepares batteries which are shut down or deeply discharged for charge acceptance. Then it determines the type and state of charge of the batteries, and the maximum current that can be applied. Finally, it shares the current intelligently between the channels, briefly addressing the most discharged batteries first, before simultaneously fully charging all batteries as quickly and efficiently as possible. PAG ACS Advanced Charging System PAG ACS is a sequential Advanced Charging System suitable for fastcharging PAG Li-Ion batteries as well as Ni-MH and Ni-Cd batteries of any reputable manufacturer. PAG ACS chargers are intelligent, requiring only the positive and negative connections to analyse the battery and apply and monitor the charging process. Fast-Charge Termination To perform properly, batteries must be charged by exactly the right amount. Undercharging gives less than full capacity and a shorter run-time, whereas overcharging can permanently damage the battery. To ensure that the fast-charge current is stopped at the correct time, and in order to detect the many varied problems associated with faulty batteries, the PAG ACS microcomputer uses a combination of several cut-off algorithms. The software developed to do this is the most powerful and complex part of the PAG ACS charger. Automatic Charge-Rate Selection PAG has incorporated further revolutionary software in its chargers to recognise and deal with the wide variety of batteries that are available to the camera operator. The charger initially analyses the battery in Recovery Charge: The Recovery Charge Program can be used to regain battery capacity lost as a result of extended storage or operation under adverse conditions. AC Camera Power: Certain chargers incorporate a built-in Camera Power Supply suitable for powering most professional broadcast cameras from an AC supply. Separate Camera Power Adaptors are available for use with Cube chargers. Information Displays: Large backlit LCD displays indicate the status of the battery and the charger, providing charge loaded and battery voltage information. Charge a Greater Variety Of Batteries The latest PAGlink (V-Mount) and PAG Cube (V-Mount & PAGlok) chargers will fast-charge simultaneously PAG and Sony Li-Ion batteries, as well as charging sequentially Ni-MH batteries of any reputable manufacturer, within the ranges 4.8V to 14.8V, 1Ah to 10Ah. PAG AR Series and Quasar chargers incorporate the following battery connections: PAGlok, Gold Mount (for PAG batteries only) and NP1. The 2.1mm (PP90) sockets on the charger’s front panels can be used for charging a great variety of batteries, within the chargers broad range, via the appropriate charge adaptor. Construction PAG chargers are quiet, cool-running light in weight, and have an impact-resistant construction, ideal for location use. They are designed to high electrical standards, with RFI certification, and are suitable for use in all broadcast environments. PAG charging systems automatically adjust to operate from AC mains supplies worldwide. PAG Cube_a high-powered simultaneous Li-Ion charger 19 • Simultaneous charger for the latest PAG & Sony Li-Ion batteries • Charges PAGlink batteries whilst linked (within 40% state of charge) • PAG Intelligent Parallel Charging • High power 100W output • V-Mount and PAGlok models • Ideal for location use • Quiet and cool-running • Ultra-compact, lightweight and robust construction • Retractable handle • Accepts firmware upgrades via battery connectors • Worldwide operation Retractable Handle Camera Power Adaptor The PAG Cube features an aluminium frame and a retractable handle that enables you to carry the charger with the batteries connected. The handle retracts back into the lid of the charger to maintain its compact dimensions for transport. A separate camera power adaptor is available (PAG CPA) that enables you to power your camera via any AC supply worldwide using any Cube charger. The PAG CPA connects to one of the charger’s battery connectors and features an XLR4 output. Cable Model 9450 XLR4M to F Coiled can be used to connect to the camera (see Page 41). PAG Cube / V-Mount PAG Cube / PAGlok PAG CPA / V-Mount • 4 x V-Mount connectors • Intelligent Parallel Charging for latest PAG and Sony Li-Ion batteries • Sequential charging for older PAG Li-Ion batteries, and Ni-MH batteries • 157 x 157 x 157mm / 1.19kg • 4 x PAGlok connectors • Intelligent Parallel Charging for latest PAGlok Li-Ion batteries • Sequential charging for older PAGlok Li-Ion, Ni-MH and Ni-Cd batteries in the ranges: 4.8V to 14.8V, 1Ah to 10Ah • 157 x 150 x 150mm / 1.19kg • AC Camera Power Adaptor for use with PAG Cube Charger • Suitable for powering all modern broadcast cameras • Outputs 100W (16.8V at 5.5A) • Requires XLR4 male to female lead Model 9450 • 130 x 86 x 47mm / 0.02kg Model 9702V Model 9702 Model 9701V PAG CPA / PAGlok Model 9701 20 PAG RMC4X_rack-mountable battery charger for OB Vehicles • Simultaneous charger for PAG and Sony Li-Ion / Ni-MH batteries • PAG Intelligent Parallel Charging • High-power 100W output • V-Mount and PAGlok models • Backlit LCD screen • 1 unit fits in a 9.5” rack and 2 fit side-by-side in full 19” rack • Measures 1U high • Ideal for use in outside broadcast vehicles or workshops • Quiet and cool-running • Worldwide operation • Accepts firmware upgrades via battery connectors Two Units Fit a 19” Rack The RMC4X is designed to be mounted in a half-width (9.5”) racking system, and measures 1U high. However, two units can be mounted side by side in a standard fullwidth 19-inch rack, by using connecting plates, available from PAG. The charging connectors can be vertically mounted alongside the rack. RMC4X-V Charger / V-Mount RMC4X-P Charger / PAGlok Battery Charging Connectors • 4 x XLR4 to V-Mount charging connectors • Intelligent Parallel Charging for latest PAG and Sony Li-Ion batteries • Sequential charging for older PAG Li-Ion batteries, and Ni-MH batteries • 210 x 201 x 44mm / 1.8kg • 4 x XLR4 to PAGlok charging connectors • Intelligent Parallel Charging for latest PAG Li-Ion batteries • Sequential charging for older PAG Li-Ion batteries, and Ni-MH & Ni-Cd batteries in the ranges: 4.8V to 14.8V, 1Ah to 10Ah • 210 x 201 x 44mm / 1.8kg • The RMC4X Charger is configured for use with either V-Mount or PAGlok batteries • Each charger is supplied with four battery charging connectors that incorporate a 1m long cable terminated with an XLR4 connector, suitable for connection to the XLR4 sockets situated on the back panel of the charger • PAG is able to provide a mounting board for the charging connectors, made to your specification, at an additional cost Model 9702VR Model 9702R PAG Universal Chargers_charge a wider range of batteries 21 • Sequential, all-chemistry chargers for a broad range of batteries • 4.8V to 14.8V, 1Ah to 10Ah • PAGlok, Gold Mount and NP1 models • Front PP90 sockets allow the charging of batteries via PAG charge adaptors • 2 or 4 channels • PAG ACS microcomputercontrolled charging extends battery life • Recovery Charge regains capacity lost during storage • Li-Ion battery recovery • Backlit LCD screen display battery status • Forward compatible via chip-upgrade kits Auto Charge-Rate Selection Discharge/Charge Program This feature provides the easiest and most efficient way of managing batteries that vary in terms of cell chemistry, voltage and capacity. The program detects the battery’s cell chemistry, state-of-charge, capacity and condition, and then applies the correct regime to achieve a fully charged battery with the maximum capacity and cycle life. The charge rate can also be manually set at 2A, 3A or 4A. Four-channel models feature PAG’s analytic Charge/Discharge program, which ‘repairs’ batteries that have been repeatedly subjected to partial discharging. The program measures and displays battery capacity. High Build Standard PAG universal chargers are designed to high electrical standards, with RFI certification, and are suitable for use in all broadcast environments. AR124PLD / PAGlok Quasar / PAGlok AR124NPD / NP1 • 4 x PAGlok connectors, 4 x PP90 sockets • Sequentially charges PAG Li-Ion batteries, Ni-Cd and Ni-MH batteries in the ranges 4.8V to 14.8V, 1Ah to 10Ah • Discharge/Charge Program • 82 x 168 x 240mm / 1.23kg • 2 x PAGlok connectors, 2 x PP90 sockets • Sequentially charges PAG Li-Ion batteries, Ni-Cd and Ni-MH batteries in the ranges 4.8V to 14.8V, 1Ah to 10Ah • 72 x 135 x 185mm / 0.88kg • 4 x NP1 pockets, 4 x PP90 sockets • Sequentially charges PAG Li-Ion batteries, Ni-Cd and Ni-MH batteries in the ranges 4.8V to 14.8V, 1Ah to 10Ah • Discharge/Charge Program • 78 x 142 x 240mm / 1.07kg Model 9726 Model 9793 Model 9792 • Incorporating 50W camera power supply Pulsar / Gold Mount Model 9752 • 4 x Gold Mount connectors, 4 x PP90 sockets • Sequentially charges PAG Li-Ion batteries, Ni-Cd and Ni-MH batteries in the ranges 4.8V to 14.8V, 1Ah to 10Ah • Discharge/Charge Program • 82 x 168 x 240mm / 1.23kg Quasar / Gold Mount Model 9795 • 2 x Gold Mount connectors, 2 x PP90 sockets • Sequentially charges PAG Li-Ion batteries, Ni-Cd and Ni-MH batteries in the ranges 4.8V to 14.8V, 1Ah to 10Ah • 80 x 135 x 185mm / 0.84kg Model 9727 • Incorporating 50W camera power supply Model 9753 22 PAG 30V AR Series_fast-chargers for 24V to 30V batteries PAG ACS Charging Autoranging Maintenance Charge The 30V AR Series of microcomputercontrolled fast-chargers operates under the control of PAG ACS, the world’s most advanced charging system. The foremost achievement of PAG ACS is the ability to fast-charge, accurately and safely, Ni-Cd and Ni-MH batteries of any manufacture. PAG ACS does not require sensors within the battery pack, the two charging wires carry all the feedback information necessary for accurate charge termination. PAG ACS is so accurate that it extends the working life of a battery beyond anything that can be achieved using other systems. The Autoranging (AR) facility adapts the charge program to sequentially fast-charge batteries within the ranges 12V to 31.2V, 1.7Ah to 10Ah. However, 30V AR Series chargers are optimised to fast-charge 24V to 30V battery packs or belts, via front XLR4 connectors. A 30V 7Ah Pagbelt or Powerman will be fast-charged in less than two hours. This feature monitors the battery after the main charge program and automatically maintains it in a state of full charge until the battery is removed from the charger. Recovery Charge The Recovery Charge program can be activated to regain capacity which has been lost as a result of extended storage or use under adverse conditions. AR301 / XLR4 AR304 / XLR4 • 1 x XLR4 connector • Sequentially charges Ni-Cd and Ni-MH batteries in the ranges 12V to 31.2V, 1.7Ah to 10Ah • Optimised for 24V to 30V batteries • Recovery Charge Program • Maintenance Charge Program • 78 x 142 x 240mm / 1.07kg • 4 x XLR4 connectors • Sequentially charges Ni-Cd and Ni-MH batteries in the ranges 12V to 31.2V, 1.7Ah to 10Ah • Optimised for 24V to 30V batteries • Recovery Charge Program • Maintenance Charge Program • 78 x 142 x 240mm / 1.07kg Model 9763 Model 9765 Worldwide Operation 30V AR Series chargers incorporate switch-mode power supply technology which adjusts automatically to enable operation wordwide. PAG Charger Adaptors 23 PP90M to V-Mount (Intelligent) PP90M to V-Mount PP90M to Gold Mount • Incorporates circuits required for charging Sony Li-Ion batteries via the front PP90 sockets of PAG AR Series 2, Pulsar and Quasar chargers • Lead length 300mm • Charge Adaptor for PAG V-Mount compatible batteries, for charging via the front PP90 sockets of PAG AR Series 2, Pulsar and Quasar chargers • Lead length 300mm • Charge Adaptor for Gold Mount batteries, for charging via the front PP90 sockets of of PAG AR Series 2, Pulsar and Quasar chargers • Lead length 280mm Model 9610 Model 9617 Model 9458 PP90M to NP1 PP90M to PAGlok XLR4F to PAGlok • For charging NP1 batteries via the front PP90 sockets of PAG AR Series 2, Pulsar and Quasar chargers • Lead length 450mm • For charging PAGlok batteries via the front PP90 sockets of PAG AR Series 2, Pulsar and Quasar chargers • Lead length 370mm • For charging PAGlok batteries via the front XLR4 sockets of PAG 30V AR Series chargers • Lead length 450mm Model 9576 Model 9514 Model 9520 XLR4F to NP1 XLR4M to XLR4F Straight AR Series 2 Chip Update • For charging NP1 batteries via the front XLR4 sockets of PAG 30V AR Series chargers • Lead length 400mm • Cable for fast-charging the Pagbelt NMH or Powerman batteries from PAG 30V AR Series Chargers • Lead length 1m Model 9579 Model 9449 • Chip-update for charging Li-Ion batteries: PAGlink, L96T, L96e, L95, L95e and L190e batteries • For AR Series 2 chargers 9792, 9793, 9794 and 9795 (green or yellow labels) Model 9670E Quasar Chip Update • Chip-update for charging Li-Ion batteries: PAGlink, L96T, L96e, L95, L95e and L190e batteries • For Quasar chargers Model 9670QE 24 Paglights_award-winning camera lights Lighting Used throughout the world by news broadcasting organisations and videographers, Paglights are the ultimate in camera lighting Standard Paglight (12V) Mini Paglight (12V) Paglight C6 Kit (6V) Paglight 250W • The original, lightweight, cool-running, halogen or arc 12V broadcast camera light is now LED also (Page 25). • Miniaturised version of the 12V Paglight for use with smaller digital camcorders. Features detachable power base (Page 30). • An all-inclusive 6V lighting kit, incorporating 6V battery and charger, designed for use with small camcorders (Page 31). • A 250W hand-held location fill-light or ‘basher’ available in 24V and 30V models (Page 32). Dimensions: • 70mm wide x 103mm long x 115mm high • Reflector size: 45mm dia. Dimensions: • 52mm wide x 77mm long x 85mm high • Reflector size: 35mm dia. Dimensions: • 52mm wide x 77mm long x 85mm high • Reflector size: 35mm dia. Dimensions: • 90mm wide x 130mm long x 126mm high • Reflector size: 60mm dia. Broadcast’s first dedicated camera light Smaller lights for smaller cameras The Standard 12V Paglight was the first on-board camera light designed specifically to meet the requirements of the broadcast industry. PAG now offers a family of lights, designed to fulfil a variety of professional requirements, but sharing many of the unique features that made Paglight the industry standard. The Mini Paglight was introduced to suit the dimensions of the smaller, digital camcorders. This miniaturised version of the 12V Paglight can be powered from a range of 12V to 14.8V battery packs and belts. The plug-in PowerArc option makes the Mini Paglight the industry’s most compact yet powerful HMI/arc light. A Softstart lamp holder is also available for use with Li-Ion batteries. The Mini Paglight can be mounted to the camera using a variety of detachable power bases. Halogen, HMI and LED Paglights are robust, light-in-weight, cool-running and fullyfocusable. Their versatility has been achieved as a result of PAG’s patented plug-in lamp holder feature. This is best illustrated in the Standard 12V Paglight which is capable of tungsten halogen output, metal-halide arc and LED. LED Technology has gradually improved, addressing the problems that early examples displayed, such as poor spectral distribution and colour temperature. Using improved LED technology, PAG offers a plug-in LED option for the Paglight, to further increase its versatility and provide you with the most economical LED solution. Plug-in lamp holder options for this light also include Softstart, for use with Li-Ion batteries, and the power saving, regulated PowerMax unit, which incorporates a dimming facility called VariLux. For users of small, handheld camcorders, whether professional or consumer, the Paglight C6 Kit is an ideal solution. This high-quality 6V system provides everything you need: Paglight, diffuser, dichroic, barn doors, battery and charger at a price to suit any equipment budget . 250W handheld location lighting The Paglight 250W is an ideal ‘basher’ or fill-light, available in 24V and 30V models. It can be used hand-held or stand-mounted on location and incorporates many of the features of the Standard Paglight: quick and easy lamp-changing, detachable power base and a range of accessories. Standard Paglight (12V)_the ultimate ENG camera light 25 Plug-in LED Dimmer Unit Halogen, HMI or LED - Paglight does it all Revolutionary by Design Paglight is a revolutionary camera light, the first specifically designed to suit professional ENG/ EFP requirements, and answer the many requests for an all-embracing, single operator camera light. Fully Focusable Paglight is continuously focusable with a beam angle that is variable from spot to flood. It has a soft, even spectral distribution with no hot spots or flaws. Cool and Versatile PAG's unique patented design makes Paglight the coolest running and most versatile camera light in the industry. Interchangeable plug-in lamp holders fit into the back of the lamp body. Variants of wattage and unit type can be exchanged without handling the lamp. There are five different lamp holder options available. Standard Halogen Lamp Holder Accepts 20W, 35W, 50W, 75W and 100W tungsten halogen long-life bi-pin lamps. Softstart A halogen lamp holder that prevents the cold lamp start-up surge from activating the over-current protection circuits within Li-Ion batteries. (This is not required when using the lamp output on a Sony camera). PowerMax A voltage regulated unit that prolongs battery run-time and saves halogen lamp filament life. Includes a lamp dimming facility which also conserves battery power. PowerArc Paglight can be instantly converted to HMI by pluggingin the PowerArc unit. The unit consumes only 32W but provides the equivalent of almost 100W tungsten, but at daylight colour temperature. LED Dimmer The highly energy efficient plug-in LED module consumes only 11W, greatly extending battery runtime. The LED Dimmer Unit has a colour temperature that matches daylight and an output of 900 lux at 2m. The LED Unit’s dimming facility enables you to control light intensity, in addition to Paglight’s spot and flood capability. Rotatable Accessory Kit This accessory ring holds any combination of snap-in accessories, including barn doors (tapered or parallel), dichroic filters that correct the colour temperature of the output, and a diffuser. The accessory ring is expanded to fit over the front of the light, can be rotated 360° to achieve the desired configuration, and then tightened to maintain its position. Softlight Diffuser & Filter Kit This kit includes a filter holding assembly that fits onto the barn doors of any Standard or Mini Paglight (including Paglight C6). It enables you to attach a supersoft light diffuser screen or colour correction filters. Paglight Power Bases Low-profile, hot-shoe Power Bases enable the Paglight to be easily and quickly mounted to the camera, or removed after shooting. Power Bases are available with a choice of connector, such as PP90, D-Tap and XLR4. Various lead lengths are available, suitable for use with most cameras. The base allows the Paglight to be mounted to the camera via a variety of mounting options suitable for all Paglights, including an extender arm and a camera clamp (see Page 33). 26 Standard Paglight (12V)_the ultimate ENG camera light LED LED LED Paglight LED (D-Tap/500mm) Paglight LED (D-Tap/150mm) Paglight LED (PP90) • LED Dimmer unit • Hot-shoe Power Base with a D-Tap connector (lead length 500mm) for use with the light output on a battery mount • Stud Adaptor & Shoe Plate • LED Dimmer unit • Hot-shoe Power Base with a D-Tap connector (lead length 150mm) for use with light output on Sony cameras • Stud Adaptor & Shoe Plate • LED Dimmer unit • Hot-shoe Power Base with a PP90 connector (lead length 500mm) for use with light output on a PAGlok Connector • Stud Adaptor & Shoe Plate Model 9965LD Model 9966LD Model 9964LD LED LED HAL Paglight LED (XLR4) LED Accessory Kit Paglight Softstart (D-Tap/500mm) • LED Dimmer unit • Hot-shoe Power Base with an XLR4 connector (lead length 1.5m) for use with XLR4 output on camera or Pagbelt NMH • Stud Adaptor & Shoe Plate • • • • • Softstart halogen lamp holder suitable for use with Li-Ion batteries • Hot-shoe Power Base with a D-Tap connector (lead length 500mm) for use with the light output on a battery mount • 20W or 35W lamps required • Stud Adaptor & Shoe Plate LED to halogen conversion filter Diffuser 2 x parallel barn doors 360° Rotatable accessory ring Model 9959D Model 9956LD Model 9945 HAL HAL HAL Paglight Softstart (PP90) Paglight Standard (D-Tap/150mm) Paglight Standard (D-Tap/500mm) • Softstart halogen lamp holder suitable for use with Li-Ion batteries • Hot-shoe Power Base with a PP90 connector (lead length 500mm) for use with the light output on a PAGlok Connector • 20W or 35W lamps required • Stud Adaptor & Shoe Plate • Standard halogen lamp holder (Sony camera has Softstart function for use with Li-Ion batteries) • Hot-shoe Power Base with a D-Tap connector (lead length 150mm) for use with the light output on Sony cameras • 20W or 35W lamps required • Stud Adaptor & Shoe Plate • Standard halogen lamp holder suitable for use with Ni-MH or Ni-Cd batteries • Hot-shoe Power Base with a D-Tap connector (lead length 500mm) for use with the light output on a battery mount • Stud Adaptor & Shoe Plate Model 9944 Model 9966 Model 9965 Standard Paglight (12V)_the ultimate ENG camera light HAL HAL 27 HAL Paglight Standard (PP90) Paglight Standard (XLR4) Paglight PowerMax (PP90) • Standard halogen lamp holder suitable for use with Ni-MH or Ni-Cd batteries • Hot-shoe Power Base with a PP90 connector (lead length 500mm) for use with the light output on a PAGlok Connector • Stud Adaptor & Shoe Plate • Standard halogen lamp holder suitable for use with Ni-MH or Ni-Cd batteries • Hot-shoe Power Base with an XLR4 connector (lead length 1.5m) for use with the XLR4 output on a Pagbelt NMH • Stud Adaptor & Shoe Plate • PowerMax halogen lamp holder regulates voltage for longer battery run-time, and features a dimming facility • Suitable for use with Ni-MH or Ni-Cd batteries • Hot-shoe Power Base with a PP90 connector (lead length 500mm) for use with light output on PAGlok Connector • Stud Adaptor & Shoe Plate Model 9956 Model 9964 Model 9946 HAL HAL HAL Paglight PowerMax (D-Tap/500mm) Paglight PowerMax (XLR4) Halogen Accessory Kit • PowerMax halogen lamp holder that provides voltage regulation for longer battery run-time and a dimming facility • Suitable for use with Ni-MH or Ni-Cd batteries • Hot-shoe Power Base with a D-Tap connector (lead length 500mm) for use with a light output on a battery mount • Stud Adaptor & Shoe Plate • PowerMax halogen lamp holder that provides voltage regulation for longer battery run-time and a dimming facility • Suitable for use with Ni-MH or Ni-Cd batteries • Hot-shoe Power Base with an XLR4 connector (lead length 1.5m) for use with the XLR4 output on a Pagbelt NMH • Stud Adaptor & Shoe Plate • • • • Model 9948 Model 9947 LED Dimmer Unit PowerArc HMI Unit Softstart Halogen Lamp Holder • Plug-in, daylight balanced LED unit • Features dimming facility for control of light intensity • Outputs 900 lux at 2m • Consumes only 11W • LEDs provide up to 1000 hours of light • Includes lamp protector • • • • • Plug-in HMI unit for 12V Paglight Daylight balanced output (5600°K) Output equivalent to 100W Consumption 35W For use with Arc Lamp Model 9967 sold separately • Includes Lamp Protector • Plug-in halogen lamp holder for 12V Paglight • For use with Li-Ion batteries • Prevents current surge on start-up • For use with 20W and 35W 12V bi-pin halogen lamps (GY6.35) • Includes Lamp Protector Model 9997D Model 9955 Model 9938 Halogen to daylight conversion filter Diffuser Parallel barn doors 360° Rotatable accessory ring Model 9959 28 Standard Paglight (12V) Accessories 9967 Arc Lamp 9998 LED Conversion Filter (LED to halogen) 9973 PowerArc Conversion Filter (PowerArc to halogen) 9951 Dichroic Filter (halogen to daylight) 9955 PowerArc (includes Lamp Protector) 9952 Diffuser 9997D LED Dimmer Unit (includes Lamp Protector) 9968 Lamp Protector 9963 Tapered Barn Doors 9983 Softlight Diffuser and Filter Kit for ultrasoft or colour lighting effects. Comprises: 2 x Filter holders 2 x Softlight diffusers 2 x Full CT blue filters 2 x Half CT blue filters 2 x Half CT orange filters (See price list for Model Nos. of individual parts). 9954 Parallel Barn Doors 12V Lamps 9953 Rotatable Accessory Holder (ring only) 9930 20W 9958 PowerMax/VariLux (includes Lamp Protector) 9959 Rotatable Accessory Kit for halogen Paglights 9959D Rotatable Accessory Kit for LED Paglights 9931 35W 9912 50W 9950 Standard Lamp Holder (includes Lamp Protector) 9932 75W 9911 100W 9938 Softstart (includes Lamp Protector) 9957 PP90 Power Base (500mm) 9960 XLR4 Power Base (1.5m) See Universal Mounting Options on Page 33 9961 D-Tap Power Base (500mm) 9962 D-Tap Power Base (150mm) Registered Design No. 2071515, Patent No. 2335027 9987 Base Locking Adaptor Power-to-light Adaptors Location Lighting Power Interface PAG Power-to-light Adaptors are a convenient, alternative way of powering and positioning an additional light source on location. The PTLA is a power interface that connects the 12V Standard Paglight to the battery. The battery acts as a stable support base for the Paglight and enables it to be positioned on any convenient flat surface, such as a table top or book shelf. Models are also available for use with the 12V Mini Paglight. PAG PTLA / PAGlok PAG PTLA / V-Mount PAG PTLA / Gold Mount • Power interface for a 12V Standard Paglight enabling it to be powered using a PAGlok battery • Power interface for a 12V Standard Paglight enabling it to be powered using a V-Mount battery • Power interface for a 12V Standard Paglight enabling it to be powered using a Gold Mount battery Model 9991 Model 9991V Model 9992 • For 12V Mini Paglight • For 12V Mini Paglight • For 12V Mini Paglight Model 9994 Model 9994V Model 9995 Standard Paglight (12V) Kits 29 Complete On-Camera Lighting Kit Paglight Kits are designed to provide everything required for a professional lighting source that can be used either on or off camera. Paglight Kit 12V 10Ah Paglight Kit 13.2V 10Ah • • • • • Standard 12V Paglight XLR4 Power Base (length 1.5m) Standard halogen lamp holder A choice of 2 halogen lamps Rotatable Accessory Kit comprising: 1 dichroic filter, 1 diffuser and 2 parallel barn doors • 12V 10Ah Pagbelt NMH with integral overnight charger and a power lead suitable for country of use • Handle 1/4” Whit. bush/stud • Camera shoe plate and stud adaptor • • • • • Model 9875N Model 9878N Standard 12V Paglight XLR4 Power Base (length 1.5m) Standard halogen lamp holder A choice of 2 halogen lamps Rotatable Accessory Kit comprising: 1 dichroic filter, 1 diffuser and 2 parallel barn doors • 13.2V 10Ah Pagbelt NMH with integral overnight charger and a power lead suitable for country of use • Handle 1/4” Whit. bush/stud • Camera shoe plate and stud adaptor Halogen Light Source The Paglight is supplied with a standard halogen lamp holder and a choice of two bipin halogen lamps (20W, 35W, 50W, 75W or 100W). The light is fitted with the halogen rotatable accessory kit. A handle is included for off-camera use. A stud adaptor and a camera shoe plate are included for mounting the light to the camera. Ni-MH Battery Belt The XLR4 Power Base enables the Paglight to be powered from the Pagbelt NMH battery belt supplied. The 10Ah Ni-MH power source, available in 12V or 13.2V formats, ideal for powering lights of up to 100W. The Pagbelt incorporates an integral overnight charger. Flight Case The kit is supplied in a compact, impact resistant flight case for convenience and Standard Paglight (12V) LED & PowerArc Kits HMI or LED Lighting Kit There are two Paglight Field Kits, one that incorporates the PAG PowerArc HMI unit, and one that incorporates the PAG LED Dimmer Unit. Each kit includes two standard halogen units, enabling you to take full advantage of the unique plug-in lamp holder system that makes Paglight the industry’s most versatile camera light. Converting the Paglight from halogen to Arc or LED takes a matter of seconds. Paglight PowerArc Field Kit Paglight LED Field Kit • Standard 12V Paglight • Choice of Power Base (PP90, D-Tap 150mm or 500mm, or XLR4) • 2 standard halogen lamp holders • A choice of 2 halogen lamps • PowerArc Unit, arc lamp and protector • Rotatable Accessory Kit comprising: 1 dichroic filter, 1 diffuser and 2 parallel barn doors • Tapered barn doors (pair) • PowerArc to halogen conversion filter • Handle 1/4” Whit. bush / stud • Camera Clamp 1/4” Whit. bush • Camera shoe plate and stud adaptor • Fitted Flight Case • 468 x 386 x 109mm / 3kg • Standard 12V Paglight • Choice of Power Base (PP90, D-Tap 150mm or 500mm, or XLR4) • 2 standard halogen lamp holders • A choice of 2 halogen lamps • LED Dimmer Unit and protector • Rotatable Accessory Kit comprising: 1 dichroic filter, 1 diffuser and 2 parallel barn doors • Tapered barn doors (pair) • LED to halogen conversion filter • Handle 1/4” Whit. bush / stud • Camera Clamp 1/4” Whit. bush • Camera shoe plate and stud adaptor • Fitted Flight Case • 468 x 386 x 109mm / 3kg Model 9825 Model 9825L Tailored to Your Needs The kit is tailored to your requirements with a choice of Power Base, suitable for the light ouput on most cameras (PP90, D-Tap or XLR4), and a choice of two halogen lamps (20W, 35W, 50W, 75W or 100W). The light is fitted with a halogen rotatable accessory kit. A dichroic filter that converts the light output to match halogen is included for use with the PowerArc and the LED unit. A stud adaptor and a camera shoe plate are included for mounting the light to the camera. A handle is included for handheld use. A Camera Clamp is included for mounting the Paglight to a camera handle. 30 Mini Paglight (12V)_top-light for handheld camcorders • Broadcast quality 12V miniature camera light • Soft, clean output, no hotspots • Plug-in Softstart lamp holder for use with Li-Ion batteries • Plug-in PowerArc HMI for high-power daylight output • Fully-focusable from spot to flood • Cool-running patented design • Detachable hot-shoe Power Base with choice of connector • Power from 12V to 14.8V battery packs or belts • Ultra-compact and lightweight 9008 Accessory Holder (ring only) 9021 Lamp Protector 9011 Barn Doors (pair) 9025 PowerArc Lamp 9022 PowerArc 12V Lamps 9018 12V 10W 9009 Dichroic Filter 9023 PowerArc Conversion Filter 9016 Standard Lamp Holder (Lamp protector & wattage labels) 9010 Diffuser 9014 D-Tap Power Base (500mm) 9019 12V 20W 9007 Rotatable Accessory Kit 9012 PP90 Power Base (500mm), 9986 (1.5m) 9017 Softstart Lamp Holder (Lamp protector & wattage labels) 9020 12V 35W See Mounting Options (all Paglights) on Page 33 9015 D-Tap Power Base (150mm) 9013 XLR-4 Power Base (1.5m) Mini Paglight PP90 Mini Paglight D-Tap Mini Paglight XLR4 Accessory Kit • Standard halogen lamp holder • Hot-shoe Power Base with a PP90 connector (lead length 1.5m) for use with the light output on a PAGlok Connector • Stud Adaptor & Shoe Plate • Standard halogen lamp holder • Hot-shoe Power Base with a D-Tap connector (lead length 500mm) for use with a D-Tap light output • Stud Adaptor & Shoe Plate • Standard halogen lamp holder • Hot-shoe Power Base with an XLR4 connector (lead length 1.5m) for use with the light output on a Pagbelt NMH • Stud Adaptor & Shoe Plate • Halogen to daylight conversion filter • Diffuser • Parallel barn doors • 360° Rotatable accessory ring Model 9001L Model 9003 Model 9002 Model 9007 Paglight C6_low-cost 6V lighting kit 31 • Miniature 6V broadcast quality halogen camera light • Soft, even output, no hotspots • Plug-in lamp holder makes lamp changing quick and easy • Daylight filter, diffuser and barn doors included • Supplied with 20W halogen lamp (10W and 30W also available) • Cool-running patented design • 6V 8Ah Ni-MH battery powers the light for 2 hrs 45 mins • Battery fully charged in 3 to 4 hrs from fully-discharged • 6V charger with AC adaptor for country of use Short Extender Arm 1019 Barn Door 6V Lamps 1010 10W 1014 Diffuser 1013 Dichroic Filter 1011 20W 1009 Lamp Holder & Lamp Protector 1016 Accessory Ring • Mounts to the camera’s accessory shoe and allows the Paglight C6 plus another accessory to be mounted Model 1020 Accessory Bracket 1012 30W 9972 Camera Shoe Plate See Mounting Options (all Paglights) on Page 33 • Mounts to the 1/4" bush on the base of the camera and allows the Paglight C6 plus one other accessory to be mounted Model 1021 Paglight C6 Kit C6 PowerPack C6 Power Charger • 6V Paglight C6 camera light • Plug-in lamp holder and 20W lamp • 360° Rotatable accessory ring, daylight filter, diffuser and barn doors • PAG C6 PowerPack (6V 8Ah Ni-MH) including a detachable shoulder strap • PAG Power Charger with detachable plug of choice (UK, Euro, US/Japan, Australia) • Camera Shoe Plate • 6V 8Ah rechargeable Ni-MH battery • Provides 2hrs 45mins continuous run-time with 20W lamp • Can be charged in 3 to 4 hours using PAG C6 Power Charger • Includes shoulder strap • Charges C6 PowerPacks in 3 to 4 hours • Requires AC input connection plug (UK, Euro, US/Japan or Australia) Model 1001 • Alternative to the shoulder strap provided with the C6 PowerPack • Mounts to the rear of the battery and enables it to be worn on a trouser belt Model 1008H Belt Clip Model 1022 Model 1002 • UK AC plug for C6 Power Charger Model 1004 • Euro AC plug for C6 Power Charger Model 1003 • US/Japan AC plug for C6 Power Charger Model 1005 • Australia AC plug for C6 Power Charger Model 1006 32 Paglight 250W_handheld location lighting • Compact and portable 250W ‘basher’ • Use handheld or stand-mounted on location • 24V and 30V models available • Soft, clean output, no hotspots • Fully-focusable from spot to flood • Plug-in lamp holder makes lamp changing quick, easy and safe • Designed to maximise heat dissipation • Detachable Power Base • Fully positionable, multi-directional mounting • Power from 24V or 30V Ni-MH battery belts • Ultra-compact and lightweight • Multiple mounting options available Paglight 250W Kits_incorporating Pagbelt NMH • • • • • • Hot-shoe power base with XLR4 connector (lead length 1.5m) Plug-in 24V halogen lamp holder Accessory ring, diffuser, halogen to daylight filter, barn doors 2 x 250W lamps Handle 24V 10Ah Pagbelt NMH incorporating integral overnight charger and AC power lead for country of use • Fitted flight case Model 9042N • Plug-in 30V halogen lamp holder • 30V 10Ah Pagbelt NMH incorporating integral overnight charger and AC power lead for country of use Model 9044N Paglight 250W 24V Paglight 250W 30V Rotatable Accessory Kit • Halogen lamp holder for use with 24V 250W lamp Model 9913 • Hot-shoe Power Base with XLR4 connector (lead length 1.5m) for use with XLR4 output on Pagbelt NMH battery belts • 60mm dia. reflector • Stud Adaptor & Shoe Plate • Halogen lamp holder for use with 30V 250W lamp Model 9914 • Hot-shoe Power Base with XLR4 connector (lead length 1.5m) for use with XLR4 output on Pagbelt NMH battery belts • 60mm dia. reflector • Stud Adaptor & Shoe Plate • • • • Model 9031 Model 9032 Halogen to daylight conversion filter Diffuser 2 x parallel barn doors 360° Rotatable accessory ring Model 9033 14 Paglight 250W_handheld location lighting 33 9033 Rotatable Accessory Kit: Ring, Diffuser, Dichroic and Parallel Barn Doors 9038 Tapered Barn Doors (pair) 9037 Parallel Barn Doors (pair) 9040 30V Lamp Holder and Protector 9914 30V 250W lamp 9036 Diffuser 9039 24V Lamp Holder and Protector 9035 Dichroic Filter 9034 Accessory Holder 9913 24V 250W lamp 9960 XLR-4 Power Base (1.5m) See Mounting Options (all Paglights) below Mounting Options_all Paglights These useful accessories enable any Paglight to be mounted to any camera, tripod, lighting rig or gaff grip Paglight Extender Arm Camera Clamp Paglight Handle Mounting Adaptor Kit • Enables you to position the camera light to the side of the subject or away from the microphone to avoid casting a shadow • Includes fittings for mounting to a camera shoe or a camera bush • Enables you to clamp the Paglight to the handle of the camera • Mounts to the Paglight via its 1/4” bush and stud adaptor Model 9971 (not included) • For handheld use • Incorporates a 1/4” stud and a 1/4” bush • Length 127mm • Comprises 9971, 9974, 9975, 9976 & 9977 Model 9978 Model 9906 Model 9807 Model 9990 Stud Adaptor male to male 1/4” Camera Shoe Plate 1/4” Thread Adaptor 3/8” dia. to 1/4” Spigot Pin 1/2” dia. to 1/4” Model 9971 Model 9972 Model 9974 Model 9975 Multi-Configuration Spigot Adaptor: 5/8", 1/2" and 1/4” dia. in-line or 90° conversion Model 9977 Spigot Adaptor 1/2” dia. to 1/4” Spigot Pin 5/8” dia. to 1/4” Model 9985 Model 9976 34 Camera Supports_for handheld camcorders and DSLR cameras • A balanced and stable shooting platform for handheld camcorders and DSLRs • Reduces fatigue on long shoots • The camera feels weightless and control is effortless • It enables a wide range of professional shooting techniques • Pan tilt and roll with 3 axis control • Shoot at right-angles to your body • Quick-release camera plate compatible with Manfrotto tripod • Telescopic suspension rod supports the camera from beneath and helps absorb camera shake • Fully adjustable • Quick and simple set-up • Tough, lightweight construction Camera Power Accessories PAG V-Mount Connector for Orbitor Back Plate Model 9522/78V In place of the counterbalance weight on the Orbitor back plate a variety of camera power options can be mounted, including: • V-Mount Connector Model 9522/78V • PAGlok Connector Model 9522/78 • C6 PowerPack Model 1008H The camera may require a DC Adaptor (See 7.2V Power Solutions on Page 36). Professional Accessories Wireless receivers, remote controls and viewing monitors can be easily clamped to the Orbitor’s rigid but lightweight structure. PAGlok Connector for Orbitor Back Plate Model 9522/78 PAG Orbitor PAG X1A PAG X1A Conversion Kit • A two-handed assembly, that provides 3 axis control, and added support for extended shooting • The camera mounting plate is compatible with the Manfrotto tripod • 1/4” Whit. camera mounting • Maximum weight supported 4.5kg • Belt fits waists up to 46" • Total weight 3.9kg • Economical, single-handed support, with pan and tilt facility, for use with smaller, lighter cameras • The camera mounting plate is compatible with the Manfrotto tripod • 1/4” Whit. camera mounting • Total weight 3.1kg • Converts the PAG X1A into a PAG Orbitor advanced camera support Model 2002 Model 2001 Model 2003 Camera Power Supplies 35 • AC on-camera power adaptor • 100W at 15V constant output • 150W peak output • Input voltage 90-264V AC • V-Mount or PAGlok models • Compact, lightweight design • Parallel XLR4 output for lighting or audio accessories • Twin USB output (5V) ideal for charging smartphones • Engineered to highest safety and reliability standards • Power on indicator • Overheat indicator • Thermal protection with auto-restart (after cooling) Power your camera and charge your smartphone simultaneously The multi-function PAG CPS100 is a 100W AC adaptor. It can be mounted to the rear of the camera, via the battery connector (V-Mount and PAGlok models are available). Alternatively it can be used off-camera. The PAG CPS100 can be used to power the most demanding digital cinema cameras, or HD broadcast camera set-ups that include picture monitoring, audio or lighting accessories. A parallel XLR4 output is included for powering camera accessories. Twin USB connectors are incorporated that output 5V, ideal for charging a smartphone battery. The CPS100 has a constant output of 100W and a peak output of 150W. It can be powered from any AC supply worldwide. Thermal protection is included and the unit will automatically restart after cooling. Charger Camera Power Adaptors PAG CPS100 / V-Mount PAG CPS100 / PAGlok The PAG CPA is a camera power adaptor that enables you to power your camera via any AC supply worldwide using the PAG Cube charger. The PAG CPA connects to one of the charger’s battery connectors and features an XLR4 output (see Page 19). • • • • • • • • • • • • • • On-camera AC adaptor 100W at 15V constant output 150W peak output V-Mount compatible Parallel XLR4 output for lighting or audio accessories Twin USB output (5V) ideal for charging smartphone battery Power on indicator Overheat indicator 125 x 175 x 53mm, 0.7kg Model 9750V • • • • On-camera AC adaptor 100W at 15V constant output 150W peak output PAGlok connector Parallel XLR4 output for lighting or audio accessories Twin USB output (5V) ideal for charging smartphone battery Power on indicator Overheat indicator 125 x 175 x 53mm, 0.7kg Model 9750 36 Power Solutions for DSLR & Digital Cinema Cameras All-Day Power for Your Camera PAG has introduced a new range of V-Mount Plates and D-Tap Power Leads designed to power a wide range of popular cameras using intelligent PAGlink Batteries. The cameras include: • • • • • Blackmagic Cinema Camera Canon C300/500 Canon EOS 5D & 7D Nikon D800 Red Epic/Scarlet PAGlink Batteries have a capacity of 96 watthours, enough to run a DSLR all day. A Blackmagic Cinema Camera, that consumes 23W, can be powered continuously for more than 4 hours. An additional battery can be linked to double run-time or provide a higher current draw of 12A. This will power your camera and all its accessories simultaneously. The PAGlink PowerHub provides all the outputs you need (see Page 8). Remaining run-time and capacity is displayed on the battery. PAG V-Mount Plates for 15mm or 19mm accessory rods PAG D-Tap Power Leads Down-Converter D-Tap Plug Above Below There are two PAG V-Mount battery mounting plate options: 1 for use with 15mm rods, and one for 19mm rods. The V-Mount incorporates a D-Tap output for connection to the camera, using the appropriate PAG D-Tap Power Lead. The assembly is designed to be clamped to mattebox or camera accessory rods (rails/bars) Horizontal V-Mount for 19mm rods and can be configured vertically or horizontally, above or below, ensuring the best position in relation to the camera display and other accessories. The V-Mount features the contacts necessary to communicate battery status to the viewfinders of cameras that incorporate a data display system. C300/500 Plug Model 9637/02 Connection to the camera is made using a PAG D-Tap Power Lead that features a a camera specific connector and a D-Tap plug, for connection to the V-Mount connector output. A down-converter lead can be supplied for those cameras that require a 7.2V to 8.2V power input. V-Mount Plate (15mm Rod Clamp / D-Tap Output) V-Mount Plate (19mm Rod Clamp / D-Tap Output) • Battery mount for use with PAGlink or standard V-Mount batteries • Clamp for 15mm rods (rails/bars) • Single D-Tap output • Requires a camera specific PAG D-Tap Power Lead (contact [email protected]) • Battery mount for use with PAGlink or standard V-Mount batteries • Clamp for 19mm rods (rails/bars) • Single D-Tap output • Requires a camera specific PAG D-Tap Power Lead (contact [email protected]) Model 9401 Model 9402 Power Solutions for Handheld Camcorders 37 Professional Power for Handheld Camcorders and DSLR Cameras PAG has developed a series of products that enable you to power 7.2V camcorders/DSLRs using broadcast batteries or battery belts. The products comprise battery mounts, that can be used off-camera (on your trouser belt, tripod or Orbitor back plate), and a range of DC Adaptors (up or down voltage-converter leads). There are three types of PAG DC Adaptor available. They allow you to power the camera using either: • 12V to 14.8V PAGlink, standard V-Mount or PAGlok batteries • 12V to 14.4V PAG battery belts • The 6V battery supplied as part of the Paglight C6 kit Down-Converters for 12V Batteries These DC Adaptors plug into the battery port of the camcorder, and into the PP90 power port of a PAG V-Mount or PAGlok Connector. The professional battery mounts can be worn on a trouser waistband or belt, or fitted to the back plate of a PAG Orbitor camera stabiliser (see Page 34). Down-Converters for Pagbelt NMH These DC Adaptor leads connect to the camcorder in the same way as the PP90 model, but incorporate an XLR4 connector that enables you to power the camera from a 12V, 13.2V or 14.4V Pagbelt NMH battery belt, worn around your waist. Down-Converter Leads for broadcast batteries Down-Converter Leads for Pagbelt NMH Model Camcorder Plug Model Camcorder Plug 9680/01 Canon XF305, EOS 7D PP90 9655/01 Canon XF305, EOS 7D XLR4 9680/02 Sony DSR 200 PP90 9655/02 Sony DSR 200 XLR4 9680/03 Sony PD150, PD170, A1E PP90 9655/03 Sony PD150, PD170, A1E XLR4 9680/04 Panasonic DVX100, HVX200 PP90 9655/04 Panasonic DVX100, HVX200 XLR4 9680/05 Sony Z1, Z5, Z7 PP90 9655/05 Sony Z1, Z5, Z7 XLR4 9680/06 Canon EOS 5D MKII PP90 9655/06 Canon EOS 5D MKII XLR4 Battery Mounts for use with 9680/- Up-Converter Leads for 6V C6 PowerPack 9522/60V PAG V-Mount Belt Clip Model Camcorder Plug Up-Converters for C6 Battery 9522/60 PAGlok Belt Clip 1023/01 Canon XF305, EOS 7D C6 These DC Adaptor leads are aimed at camcorder users who don’t own 12V batteries and chargers, and who are looking for an economic, all-in-one camera power and lighting solution. The Paglight C6 Kit contains a professional quality on-board 6V halogen light, a 6V 8Ah Ni-MH battery, and a designated charger (see Page 31). The appropriate DC Adaptor will boost the 6V output of the C6 battery to power the 7.2V to 8.4V camera, providing extended run-time. The same battery can be used to simultaneously power the 6V Paglight C6. The 9522/78V PAG V-Mount for Orbitor Back Plate 1023/02 Sony DSR 200 C6 9522/78 PAGlok for Orbitor Back Plate 1023/03 Sony PD150, PD170, A1E C6 1023/04 Panasonic DVX100, HVX200 C6 1023/05 Sony Z1, Z5, Z7 C6 1023/06 Canon EOS 5D MKII C6 DC Adaptor attaches to the camcorder via the battery port. If you purchase an additional C6 PowerPack with your Paglight C6 Kit, you will be able to run your camcorder and camera light for twice as long, without stopping to charge a battery. Belt-Clip Battery Mounts Both the PAG V-Mount and PAGlok battery mounts are available in models that incorporate a belt clip for use on your trouser belt. This is ideal for situations where the battery cannot be mounted to the camera. Each model incorp-orates two PP90 output sockets: one for connection to the camera via a DC Power Adaptor, and the other for powering a light or similar 12V camera accessory. V-Mount Belt Clip PAGlok Belt Clip • Clips onto your trouser belt • 2 x PP90 output sockets for powering a camera light and a 7.2V camcorder via a down-converter lead • Clips onto your trouser belt • 2 x PP90 output sockets for powering a camera light and a 7.2V camcorder via a down-converter lead Model 9522/60V Model 9522/60 38 Battery Mounts & Mount Adaptors_convert your system Battery Mounts Now that Sony’s V-Mount system has been widely adopted, PAG provides its own version of the V-Mount battery connector for use with a wide range of cameras and equipment. The PAGlok Connector was one of the broadcast industry’s earliest battery mounting systems. A PAGlok Connector can be provided for virtually any broadcast equipment power application. PAG V-Mount Connector PAGlok Connector • Provides a secure mechanical and electrical connection between the battery and the camera/equipment • Camera specific • PP90 or D-Tap output socket • Provides a secure mechanical and electrical connection between the battery and the camera/equipment • Camera specific • PP90 output socket Model 9522/-V Model 9522/- Belt-Mounted V-Mount Connectors Belt-Mounted PAGlok Connectors • Use any V-Mount battery to power camera accessories independent of the camera battery • Replacement battery conveniently placed • Two full-size PAG V-Mount Connectors • Adjustable, lightweight belt with quick release buckle • Single XLR4 output • Use any PAGlok battery to power camera accessories independent of the camera battery • Replacement battery conveniently placed • Two full-size PAGlok Connectors • Adjustable, lightweight belt with quick release buckle • Single XLR4 output Model 9523V Model 9523 Gold Mount to V-Mount Adaptor PAGlok to V-Mount Adaptor • Adapts the camera Gold Mount for use with V-Mount batteries • Adapts the camera PAGlok Connector for use with V-Mount batteries Model 9510 Model 9512 Gold Mount to PAGlok Adaptor V-Mount to PAGlok Adaptor • Adapts the camera Gold Mount for use with PAGlok batteries • Adapts the camera V-Mount for use with all PAGlok batteries Model 9518 Model 9513 Belt-Mounted Battery Mounts Belt-mounted battery mounts are a convenient way of carrying two batteries (PAGlok or V-Mount) to provide offcamera power for a range of applications. Output is via an XLR4 socket. The batteries’ voltages and capacities are not connected in any way and power is not continuous. Battery Mount Adaptors In the interest of universality, PAG has always provided battery mount adaptors that allow its batteries to be used with other manufacturer’s mounting systems and vice verca. Dual Battery Mounts_combine battery capacities 39 • Combine the capacities of two L95/L96 batteries • Create a 192Wh power source that can handle a high current draw of up to 10A • Use the Power Plate to convert your battery mounting system, if required • Travel by air with 192Wh of Li-Ion power and comply with air transport regulations • Ensure that your high-definition set-up does not over-discharge the power source • The Power Plate and two L96 batteries weigh only 1.87kg, and are an ideal counterbalance for the lens • Maintain in-the-viewfinder capacity data provided by V-Mount L96 batteries Power Plate / V-Mount to PAGlok Power Plate / PAGlok to PAGlok • Accepts 2 x L95/L96 V-Mount Batteries • For camera with PAGlok Connector • 171x 135 x 44mm / 0.39kg • Accepts 2 x L95/L96 PAGlok Batteries • For camera with PAGlok Connector • 171 x 129 x 39mm / 0.39kg Model 9551V Model 9551 Power Plate / V-Mount to Gold Mount Power Plate / PAGlok to Gold Mount • Accepts 2 x L95/L96 V-Mount Batteries • For camera with Gold Mount • 171 x 135 x 45mm / 0.41kg • Accepts 2 x L95/L96 PAGlok Batteries • For camera with Gold Mount • 171 x 129 x 40mm / 0.40kg Model 9552V Model 9552 Power Plate / V-Mount to V-Mount Power Plate / PAGlok to V-Mount • Accepts 2 x L95/L96 V-Mount Batteries • For camera with Sony V-Mount • 171 x 135 x 45mm / 0.43kg • Accepts 2 x L95/L96 PAGlok Batteries • For camera with Sony V-Mount • 171 x 129 x 40mm / 0.42kg Model 9553V Model 9553 Dual Battery Mount / Gold Mount to Gold Mount • Accepts 2 x Gold Mount batteries (including PAG L95 and L96) • Combines battery capacities for a longer run-time and a higher current-draw • For use with the Gold Mount on a Steadicam Pro-Rig • 154 x 91 x 130mm / 0.41kg Model 9554 40 Continuous Power Units Power Module Power Module Series/Parallel Module Series/Parallel Belt • Supplies continuous power from two batteries for editing equipment, remote cameras or microwave links • 12V to 14.8V output via XLR4 socket • A third power source, such as a Pagbelt, can be connected via the XLR4 input • Two Power Modules can be linked to provide seamless power from up to 5 power sources using connecting lead Model 9664 • Includes carrying strap • 135 x 115 x 55mm / 0.4kg • Supplies continuous power from two batteries for editing equipment, remote cameras or microwave links • 12V to 14.8V output via XLR4 socket • 7.2V output via connector of your choice • A third power source, such as a Pagbelt, can be connected via the XLR4 input • Two Power Modules can be linked to provide seamless power from up to 5 power sources using connecting lead Model 9664 • Includes carrying strap • 135 x 115 x 55mm / 0.4kg • Connects two batteries in series to produce an output voltage equal to the sum of the two batteries’ individual voltages (up to 30V), for applications such as powering lighting or microwave links • Connects two batteries in parallel to produce a capacity equal to the sum of the two batteries’ individual capacities (up to 14Ah) for extended equipment run-time and continuous operation • Output via XLR4 socket • Connects two batteries in series to produce an output voltage equal to the sum of the two batteries’ individual voltages (up to 30V), for applications such as powering lighting or microwave links • Connects two batteries in parallel to produce a capacity equal to the sum of the two batteries’ individual capacities (up to 14Ah) for extended equipment run-time and continuous operation • Output via XLR4 socket • Quick-release buckle Model 9661V • Model for use with PAG V-Mount batteries Model 9581V • Model for use with PAGlok batteries Model 9663V • Model for use with PAGlok batteries Model 9661 • Model for use with PAGlok batteries Model 9581 • Model for use with PAG V-Mount batteries • Model for use with PAG V-Mount batteries • Model for use with PAG V-Mount batteries Model 9527V • Model for use with PAGlok batteries Model 9527 Model 9663 Radio Mic Receiver Brackets Left Side-Facing Kit Right Side-Facing Kit Dual Kit 9522/58 & 64 Kit • For use with cameras fitted with the PAGlok connector (not included) • Enables the mounting of a radio microphone receiver • For use with cameras fitted with the PAGlok connector (not included) • Enables the mounting of a radio microphone receiver • For use with PAGlok to V-Mount Adaptors Models 9522/58 & 9522/64. • Enables the mounting of a radio microphone receiver Model 9620 Model 9621 • For use with cameras fitted with the PAGlok connector (not included) • Enables the mounting of two radio microphone receivers Model 9622 Model 9623 Smartphone Battery Charge Adaptors 41 PAGlok to Cigar Lighter V-Mount to Cigar Lighter Gold Mount to Cigar Lighter • Enables you to charge your smartphone battery using any PAGlok battery • Requires Cigar Lighter (male) to USB connector (not included) • Enables you to charge your smartphone battery using any V-Mount battery • Requires Cigar Lighter (male) to USB connector (not included) • Enables you to charge your smartphone battery using any Gold Mount battery • Requires Cigar Lighter (male) to USB connector (not included) Model 9506 Model 9507 Model 9508 Connectors & Cables XLR4M to XLR4F Coiled PP90M to XLR4M PP90M to XLR4F • Cable for use with PAG Camera Power Adaptors (Models 9701 & 9701V) • Lead length 650mm • Lead length 1m • Lead length 150mm Model 9455 Model 9687 Configurable D-Tap Connector Model 9671 Model 9450 PP90 In-line Socket Model 9686 42 Transport of Lithium-Ion Batteries UN TESTING The International Air Transport Association (IATA) in association with the International Civil Aviation Organisation (ICAO) and the United Nations (UN) set clearly defined rules regarding the transport of Li-Ion batteries. The IATA Lithium-Ion Battery Guidance Document (2013) requires the independent testing of each type of Li-Ion battery, not just the individual cells, to ensure that the design and construction are compliant with the stringent regulations. This is a costly process for the manufacturer, but it should assure you, the customer, that the battery design is safe and of the highest possible professional standard. • Li-Ion batteries that have capacities greater than 160Wh cannot be taken as hand luggage or checked-in under any circumstances. PAG recommends that customers also confirm with their carrier of choice, to determine any local rules and policies, before travelling. Your PAG Li-Ion batteries are fully protected against short-circuit and over-current. However, it is recommended that you make sure they are obviously safe and inspire confidence in the airport check-in staff: • Put tape over the contacts. • Place each battery in a plastic bag. PAG Li-Ion batteries have been tested and certified to comply with United Nations Specification ST/SG/AC.10/11/Rev 4. Copies of the test reports can be obtained from PAG Ltd. • Pack batteries in your hand-luggage in a safe and secure manner. TRANSPORT REGULATIONS We advise that you carry a copy of the PAG Air Transport Certificate supplied with each PAG Li-Ion battery, or download a copy from the PAG website: The IATA regulations also affect individuals carrying Li-Ion batteries on-board civil aircraft, and influence the way they are classified, labelled and packed when transported as air cargo or by road freight. Restrictions are imposed on batteries that have capacities greater than 100Wh. PAG Ltd. hereby declares that its PL96 and L96 Lithium-Ion batteries have a watt-hour rating of less than 100 watt-hours. This rating is in compliance with Section 2.3.5.9 of the IATA Lithium-Ion Battery Guidance Document (2013). The following information will assist you when travelling with or shipping Li-Ion batteries: Transport by Commercial Airline / Personal Luggage • Check-in of Li-Ion batteries is not allowed unless the battery is attached to the camera or the equipment it powers. • An individual may take on-board, in hand luggage, an unlimited number of Li-Ion batteries that have capacities of 100Wh or less. • Li-Ion batteries that have capacities greater than 100Wh, but less than 160Wh, are restricted to 2 items per person, in hand-luggage. www.paguk.com For more information regarding Travelling Safely with Batteries and Battery-Powered Devices, please see the following website: http://safetravel.dot.gov/whats_new_batteries.html Transport by Air Freight and Road Freight • Li-Ion batteries that have capacities of 100Wh or less can be shipped by air or road, without restriction, as long as they comply with Packing Instruction 965. • Li-Ion batteries over 100Wh, when shipped by road or air, are classified as dangerous goods and subject to special packaging certification and approval from external specialists. The correct forms and packaging labels for shipping PAG Li-Ion batteries can be obtained from PAG Ltd. or downloaded from the PAG website. The PAG Guarantee, Service & Support THE PAG GUARANTEE PAG guarantees each product for a period of 18 months, unless otherwise stated. PAGlink, PAG L96T Time Batteries, PAG L96e Batteries, PAG Chargers and 12V Paglights carry a 2 year guarantee. Refer to the product Instruction Manual or PAG website for full guarantee terms and conditions. MANUFACTURING EXCELLENCE ISO 9001:2008 is a standard that relates to quality management systems and is designed to help ensure that companies meet the needs of their customers. PAG is proud to have been certified to ISO 9001:2008 standard in recognition of the seriousness with which the company takes matters of quality control. SERVICE & SUPPORT PAG provides full technical support throughout a product’s lifetime, which includes servicing, repairs and technical advice. The quality of this service is second-to-none because PAG is the concept originator, design authority and manufacturer of its products. PAG maintains a worldwide network of Authorised Service Centres. These facilities have a wealth of specialist knowledge, which is the result of PAG’s 40 years of experience. Using PAG’s Authorised Service Centres is the only way to ensure the continuation of the quality standard for which you first chose PAG products. For servicing outside of the UK contact your nearest PAG Agent via the PAG website at www.paguk.com For servicing in the UK contact the PAG Service Department at the London headquarters, or email [email protected] Recelling PAG batteries should only be recelled by PAG. A cell replacement by a company other than PAG degrades the build standard of the product and leaves you with a battery of dubious quality, and a potential safety concern. As an alternative to recelling your battery, PAG offers UK customers a 25% discount on the price of a new battery of equivalent or greater specification, including a full warranty. Recycling PAG provides a recycling service for all of its expired batteries. Simply return your batteries by prior arrangement to your PAG Agent, or to PAG Ltd. London. This ensures that the materials involved in their manufacture are recovered for future use, where possible, or disposed of in accordance with the appropriate legislation. TRADEMARKS The following are trademarks of PAG Ltd: ‘PAG Professional Broadcast Equipment’ ‘PAGlink’ ‘Time Battery’ ‘Power & Time Display’ ‘Pagbelt’ ‘PAG ACS’ ‘PAG AR Series 2’ ‘PAG Pulsar’ ‘PAG Quasar’ ‘PAG Cube’ ‘PAG iPC’ ‘PAG Freelancer’ ‘PAG Power Plate’ ‘PAGlok Connector’ ‘Paglight’ ‘Softstart’ ‘PowerArc’ ‘PowerMax’ All third party trademarks are acknowledged as such. PAG Ltd. retains the right to change the specifications contained herein without notice. 43 PAG Ltd. 565 Kingston Road London SW20 8SA United Kingdom E [email protected] T +44 (0)20 8543 3131 F +44 (0)20 8540 4116 www.paguk.com © 2013 PAG Ltd.

Product Catalogue September 2013 /

Rating

Date

Size

Views

Categories

Share

Transcript

Forgot your password?.