Product Data Sheet - Category 6a Ftp Rj45 Solution, 15849

Transcript

CATEGORY 6A FTP RJ45 SOLUTION Clipsal titanium® Patch Cord Clipsal titanium® LSZH Patch Cord Clipsal titanium® Keystone Jacks Clipsal titanium® Modular Jacks Clipsal titanium® Patch Panels Clipsal titanium® Fully Featured Patch Panel Clipsal titanium® Cable Clipsal titanium® LSZH Cable Clipsal titanium® Cable Management Panel Deep Clipsal Side Rings MUTOs CLIPSAL DATACOMMS | CATEGORY 6A FTP RJ45 SOLUTION | INTRODUCTION Clipsal titanium® Category 6A FTP RJ45 Solution The Clipsal Titanium Category 6A FTP patched solution provides a shielded product, which prevents AXT (Alien Cross Talk). This solution includes FTP cable, patch panels, patch leads, modular jacks, faceplates and cable management. This system is designed to support 10G Base T applications, and offers a great solution for an installation requiring high-speed and high bandwidth. The Clipsal Lifetime warranty is available upon application. 80 CLIPSAL DATACOMMS | CATEGORY 6A FTP RJ45 SOLUTION | PATCH CORD Clipsal titanium® Category 6A FTP Patch Cord The Clipsal titanium® Series Category 6A FTP Patch Cord is a superior product delivering the best network performance when used in conjucntion with this series of products. The patch cord is constructed of high grade cable and quality RJ45 plugs, and is designed to operate up to 500MHz. This enables it to operate successfully in a Category 6A environment. RJ6AF8A10PL,BU MECHANICAL CHARACTERISICS PRODUC T FEATURES Cable • Fully compliant to AS/NZS 3080:2003, ISO/IEC 11801 Edition 2 2002 and ANSI/TIA/EIA-568-C Series Channel and Link Standards. • PE insulation on conductors. • PVC outer jacket material. • Available in multiple lengths. • Backward compatible with Category 5e and 6 products. • Designed to mitigate ANEXT. • Snag-free design. • Strain relief boot. Gauge (AWG) 26 AWG Pair Count 4 Pair individually colour coded with filler and PVC jacket Sequence Wiring sequence T568 A Durability 750 mating cycles RJ45 Plug FCC Part 68 Subpart Contact Material Phosphor bronze with 50 micro-inches gold over 100 micro-inches nickel CUSTOMER BENEFITS ELECTRICAL CHARACTERISTICS Current Rating 2.0 A maximum Insulation 500MΩ minimum Contact Resistance 20MΩ maximum • Performs to Category 6A international standards. • Comes in various lengths to assist with better cable management. • Backward compatible with Category 5e and 6. LINE DRAWING CATALOGUE NUMBER DESCRIPTION RJ6AF8A10PL,BU Patch Cord Category 6A FTP 568A 1.0m RJ6AF8A20PL,BU Patch Cord Category 6A FTP 568A 2.0m RJ6AF8A30PL,BU Patch Cord Category 6A FTP 568A 3.0m RJ6AF8A50PL,BU Patch Cord Category 6A FTP 568A 5.0m 81 CLIPSAL DATACOMMS | CATEGORY 6A FTP RJ45 SOLUTION | PATCH CORD Clipsal titanium® Category 6A FTP Patch Cord Low Smoke Zero Halogen The Clipsal titanium® Series Category 6A FTP Patch Cord is a superior product delivering the best network performance when used in conjunction with other Clipsal titanium® Category 6A products. The patch cord is constructed of high grade cable and quality RJ45 plugs, and is designed to operate up to 500MHz. This enables it to operate successfully in a Category 6A FTP environment. RJ6A8A10LPL, BU Clipsal Datacomms has released a range of PVC free, Low Smoke Zero Halogen (LSZH) Category 6A FTP LAN cable and patch cords. PRODUC T FEATURES The LSZH sheath is composed of thermoplastic and thermoset compounds that emit limited smoke and zero halogens (poisonous gases) when exposed to high sources of heat or fire and are PVC free. Clipsal titanium® 4 Pair LSZH Category 6A FTP LAN Cable and patch cords are superior products delivering excellent network performance and a "greener" peace of mind. More LSZH and RoHS products are being used as networks move toward a "greener" workplace and environment. MECHANICAL CHARACTERISICS • Cable sheath complies with IEC60332-3C (HF3). • Fully compliant to AS/NZS 3080:2003, ISO/IEC 11801 Edition 2 2002 and ANSI/TIA/EIA-568-C Series Channel and Link Standards. • UL CMR fire rated jacketing. • PE insulation on conductors. • Available in multiple lengths. • Designed to mitigate ANEXT. Cable Gauge 26 AWG Pair Count 4 Pair individually colour coded with filler and LSZH jacket Sequence Wiring sequence T568 A Durability 750 mating cycles RJ45 Plug FCC Part68 Subpart F Plug Boot LSZH Contact Material Phosphor bronze with 50 micro-inches gold over 100 micro-inches nickel ELECTRICAL CHARACTERISTICS Current Rating 2.0 A maximum Insulation 500MΩ minimum Contact Resistance 20MΩ maximum LINE DRAWING 82 CATALOGUE NUMBER DESCRIPTION RJ6AF8A10LPL,BU Patch Cord Category 6A FTP LSZH 568A 1.0m RJ6AF8A20LPL,BU Patch Cord Category 6A FTP LSZH 568A 2.0m RJ6AF8A30LPL,BU Patch Cord Category 6A FTP LSZH 568A 3.0m RJ6AF8A50LPL,BU Patch Cord Category 6A FTP LSZH 568A 5.0m CUSTOMER BENEFITS • Performs to Category 6A international standards. • Comes in various lengths to assist with better cable management. • Backward compatible with Category 5 and 6 products. • Complies to LSZH requirements. CLIPSAL DATACOMMS | CATEGORY 6A FTP RJ45 SOLUTION | JACKS Clipsal titanium® Category 6A FTP Jack Modular - Suits Clipsal Wall Plates PRODUC T FEATURES • Fully compliant to AS/NZS 3080:2003, ISO/IEC 11801 2002, ANSI/TIA/EIA-568-C Series and ANSI/TIA/EIA568-B.2-10 (draft) Connecting Hardware Standards. • Flexible locking tabs. • Tool-less termination. • Suits Clipsal Wall Plates. A B C The Clipsal titanium® range of products are the next generation of data communications solutions. These FTP modular jacks are colour coded for both 568A and 568B standards. The FTP Jack features an easy to install tool-less design. These products are designed to fit into all Clipsal Wall Plates without the additional cost of an interfacing bezel. DIMENSIONS Product 30RJ45SM6AF A B C 26mm 23mm 41mm CUSTOMER BENEFITS • Is backward compatible with Category 5e and 6 products, allowing component mixing without degrading the network below the minimum component category. • Flexible locking tabs allow for easy removal from wall plates. • Designed to eliminate alien crosstalk (ANEXT). ELECTRICAL CHARACTERISTICS Dielectric Strength 1,000V RMS at 60Hz for 1 minute Current Rating 2 A maximum Insulation Resistance 500MΩ minimum @ 100V d.c. Contact Resistance 2.5MΩ per contact Temperature Range -40˚C to +70˚C Transmission Performance TIA/EIA-568-B. 2-10 draft 7.0 channel performance MECHANICAL CHARACTERISTICS Modular Connector RJ45 8-Pin Connector FCC part 68, Subpart F and IEC-60603-7 compliant Durability >750 mating cycles Material Phosphor bronze with 50 micro- inches of gold over 70-100 micro-inches nickel plating IDC Connector IDC Connector Suitable insulation of 22 to 24 AWG (0.64 to 0.41mm) Insulation Diameter (Wire) 0.70 - 1.60mm Connector Material Phosphor bronze alloy with 100 micro-inch 100% Sn alloy LINE DRAWING CATALOGUE NUMBER DESCRIPTION 30RJ45SM6AF Connector RJ45 Category 6A FTP 30 Mech (Suits standards Clipsal Wall Plates) 83 CLIPSAL DATACOMMS | CATEGORY 6A FTP RJ45 SOLUTION | JACKS Clipsal titanium® Category 6A FTP Jack Keystone A C B RJ45SM6AF The Clipsal titanium®Series Category 6A FTP Keystone Jack is a superior product delivering the best network performance when used in conjunction with other products in this range. PRODUC T FEATURES The Clipsal titanium® range of products are the next generation of data communications solutions. These FTP modular jacks are colour coded for both 568A and 568B standards. The FTP Jack features an easy to install tool-less design. DIMENSIONS Product RJ45SM6AF A B C 26mm 17mm 41mm ELECTRICAL CHARACTERISTICS Dielectric Strength 1,000V RMS at 60Hz for 1 minute Current Rating 2 A maximum Insulation Resistance 500MΩ minimum @ 100V d.c. Contact Resistance 2.5MΩ per contact Temperature Range -40˚C to +70˚C Transmission Performance TIA/EIA-568-C 10 channel and link performance MECHANICAL CHARACTERISTICS Modular Connector RJ45 8-Pin Connector FCC part 68, Subpart F and IEC-60603-7 compliant Durability >750 mating cycles Material Phosphor bronze with 50 micro- inches of gold over 70-100 micro-inches nickel plating IDC Connector IDC Connector Suitable insulation of 22 to 24 AWG (0.64 to 0.41mm) Insulation Diameter (Wire) 0.70 - 1.40mm Connector Material 84 Phosphor bronze alloy with 100 micro-inch 100% Sn alloy CATALOGUE NUMBER DESCRIPTION RJ45SM6AF Connector RJ45 Category 6A FTP Keystone • Fully compliant to AS/NZS 3080:2003, ISO/IEC 11801 2002, ANSI/TIA/EIA-568-C Series and ANSI/TIA/EIA 568-B.2-10 (draft) Connecting Hardware Standards. • Flexible locking tabs. • Tool-less termination. CUSTOMER BENEFITS • Is backward compatible with Category 5e and 6 products, allowing component mixing without degrading the network below the minimum component category. • Flexible locking tabs allow for easy removal from wall plates. • Designed to eliminate alien crosstalk (ANEXT). CLIPSAL DATACOMMS | CATEGORY 6A FTP RJ45 SOLUTION | PATCH PANELS Clipsal titanium® Category 6A FTP Patch Panel 24 Port The Clipsal titanium® 1RU 19”rack mountable FTP Category 6A patch panel, is specifically designed to meet the highest standards in both performance and functionality. Each panel comes complete with the high performing Clipsal titanium Category 6A keystone FTP connectors that feature time saving tool-less termination and a quick snap-in design for mounting into the patch panel. All Clipsal titanium Category 6A FTP Patch Panels come with the tried and true Clipsal titanium features the market expects from premium products, such as the use of high quality materials in manufacturing, integrated port labelling, full accompaniment of hardware and ties plus any industry leading lifetime warranty program that provides unparalleled peace of mind for the installer and end-user. ELECTRICAL CHARACTERISTICS Dielectric Strength 1,000V RMS at 60Hz for 1 minute Current Rating 2 A maximum Insulation Resistance 500MΩ minimum @ 100V d.c. Contact Resistance 2.5MΩ per contact Temperature Range -40˚C to +70˚C Transmission Performance RJ6AA1F24PP PRODUC T FEATURES • Nickle plated and powder coated frame with earthing point. • Individual port labelling. • Individual snap-in connectors for easy maintenance. • Supplied with tool-less connectors for easy installation. • Universal colour coding for 568A and 568B Standards. • Removable rear cable management tray. • Compatible with standard 19” equipment frames. • Fully compliant to AS/NZS 3080:2003, ISO/IEC 11801 2002, ANSI/TIA/EIA-568-C Series and ANSI/TIA/EIA568-B.2-10 (draft) Connecting Hardware Standards. • Complete with all mounting and cable fixing hardware. TIA/EIA-568-B. 2-10 draft 7.0 channel performance MECHANICAL CHARACTERISTICS Modular Connector RJ45 8-Pin Connector FCC part 68, Subpart F and IEC-60603-7 compliant Durability >750 mating cycles Material Phosphor bronze with 50 micro inches of gold over 70-100 micro-inches nickel plating CUSTOMER BENEFITS • Rear cable management tray is supplied loose, allowing the installer to fit after termination. • The front labelling system provides a clear and efficient means of identifying circuits. • Powder coated metal frame is robust and protects the patch panel from corrosion and scratching. IDC Connector IDC Connector Suitable insulation of 22 to 24 AWG (0.64 to 0.41mm) Insulation Diameter (Wire) 0.70 - 1.40mm Connector Material Phosphor bronze alloy with 100 micro-inch 100% Sn alloy CATALOGUE NUMBER DESCRIPTION RJ6AA1F24PP Patch Panel Category 6A FTP, 24 Port 85 CLIPSAL DATACOMMS | CATEGORY 6A FTP RJ45 SOLUTION | PATCH PANELS Clipsal titanium® Category 6A FTP Patch Panel 24 Port Fully Featured The Category 6A FTP Fully Featured Patch Panel incorporates channel designation dials with icons for the top and colours for the bottom of each outlet. It also features hinged label windows (top and bottom) allowing for further identification of each channel designation. RJ6AA1F24KPI Rear cable management tray, velcro cable ties, cage nuts and screws are also provided with the product. PRODUC T FEATURES ELECTRICAL CHARACTERISTICS Dielectric Strength 1,000V RMS at 60Hz for 1 minute Current Rating 2 A maximum Insulation Resistance 500MΩ minimum @ 100V d.c. Contact Resistance 2.5MΩ per contact Temperature Range -40˚C to +70˚C Transmission Performance TIA/EIA-568-B. 2-10 draft 7.0 channel performance MECHANICAL CHARACTERISTICS Modular Connector RJ45 8-Pin Connector FCC part 68, Subpart F and IEC-60603-7 compliant Durability >750 mating cycles Material Phosphor bronze with 50 micro inches of gold over 70-100 micro-inches nickel plating IDC Connector IDC Connector Suitable Insulation of 22 to 24 AWG (0.64 to 0.41mm) Insulation Diameter (Wire) 0.70 - 1.40mm Connector Material 86 Phosphor bronze alloy with 100 micro-inch 100% Sn alloy CATALOGUE NUMBER DESCRIPTION RJ6AA1F24KPI Fully Featured Patch Panel Category 6A FTP, 24 Port • Top (icon) and bottom (colour) designated dials. • Top and bottom hinged label windows for additional identification. • Nickel plated and powder coated frame with earthing point. • Individual snap-in connectors for easy maintenance. • Supplied with tool-less connectors for easy installation. • Universal colour coding for 568A and 568B standards. • Removable rear cable management tray. • Compatible with standard 19” equipment frames. • Fully compliant to AS/NZS 3080:2003, ISO/IEC 11801 2002, ANSI/TIA/EIA-568-C Series and ANSI/TIA/EIA568-B.2-10 (draft) Connecting Hardware Standards. • Complete with all mounting and cable fixing hardware. CUSTOMER BENEFITS • Channel designation dials and hinged windows provide an extensive level of designation identification. • Rear cable management tray is supplied loose, allowing the installer to fit after termination. • Powder coated metal frame is robust and protects the patch panel from corrosion and scratching. CLIPSAL DATACOMMS | CATEGORY 6A FTP RJ45 SOLUTION | CABLE Clipsal titanium® Category 6A FTP Cable Clipsal titanium® 4-Pair Category 6A FTP Cable delivers excellent network performance when used in conjunction with other Clipsal titanium® Category 6A FTP products. The Category 6A FTP cable consists of four pairs of solid insulated copper 23 AWG (0.57mm) and is UL listed. It is designed for use in horizontal cabling situations and supplied in 305m (1,000ft) easy pull out reels. 2D4P6AIPVF3B,BU PHYSIC AL SPECIFIC ATIONS Rated Temperature (˚C) Product Standard Certification Flammability Test Application Reference Standard 75 UL FT4 Horizontal wiring in LAN UL Subject 444, AS/NZS 3080:2003, ISO/IEC 11801 2002, ANSI/TIA/EIA-568-C Series and ANSI/TIA/EIA-568-B.2-10 (draft) Connecting Hardware Standards, IEC61156-5 Conductor Insulation Filler Drain Wire Shield Jacket MECHANICAL CHARACTERISTICS Test Object Test Material Before Tensile Strength (Kg/mm2) Jacket PVC ≥1.05 CONSTRUCTION Conductor AWG Conductor Dia. Nom. (mm) Insulation Average Thickness (mm) Insulation Diameter (±0.10mm) Filler Jacket Average Thickness (±0.05mm) Min. Point Thickness (mm) Outer Diameter (±0.2mm) Drain Wire Shield Coverage (%) Solid bare copper 23 0.60 PE 0.27 1.15 PE PVC 0.60 0.43 7.30 YES Aluminium/Polyester ≥125% ELECTRICAL CHARACTERISTICS Frequency Attenuation (MHz) (dB/100m) 1 4 8 10 16 20 25 31.25 62.50 100 200 250 300 400 500 2.1 3.8 5.3 5.9 7.5 8.4 9.4 10.5 15.0 19.1 27.6 31.1 34.3 40.1 45.3 NEXT (dB) PSNEXT (dB) 74.3 65.3 60.8 59.3 56.2 54.8 53.3 51.9 47.4 44.3 39.8 38.8 37.1 35.3 33.8 72.3 63.3 58.8 57.3 54.2 52.8 51.3 49.9 45.4 42.3 37.8 36.6 35.1 35.1 31.8 ELFEXT PSELFEXT (dB/100m) (dB/100m) 67.8 55.8 49.7 47.8 43.7 41.8 39.8 37.9 31.9 27.8 21.8 19.8 18.3 15.8 13.8 64.8 52.8 46.7 44.8 40.7 38.8 36.8 34.9 28.9 24.8 18.8 16.8 15.3 12.8 10.8 CATALOGUE NUMBER DESCRIPTION 2D4P6AIPVF3B,BU LAN Cable Category 6A FTP 305m Box (Blue Only) RL Delay PSANEXT PSAACRF 20.0 23.0 24.5 25.0 25.0 25.0 24.3 23.6 21.5 20.1 18.0 17.3 16.8 15.9 15.2 570 552 547 545 543 542 541 540 539 538 567 536 536 536 536 67.0 67.0 67.0 67.0 67.0 67.0 67.0 67.0 65.6 62.5 58.0 56.5 55.3 53.5 52.0 67.0 66.2 60.1 58.2 54.1 52.2 50.2 48.3 42.3 38.2 32.2 30.2 28.7 26.2 24.2 1.0-100.0MHz Input Impedance (Ohms) 100 ± 15 1.0-250.0MHz Delay Skew (ns/100m) ≤45 Pair-to-Ground Capacitance Unbalance (pF/100m) ≤330 Max. Conductor DC Resistance 20˚C (Ohms/km) 93.8 Resistance Unbalance (%) ≤5 87 CLIPSAL DATACOMMS | CATEGORY 6A FTP RJ45 SOLUTION | CABLE Clipsal titanium® Category 6A FTP Cable Low Smoke Zero Halogen Clipsal titanium® 4 Pair Category 6A FTP Cable delivers excellent network performance when used in conjunction with other Clipsal titanium® Category 6A FTP products. The Category 6A FTP cable consists of four pairs of solid insulated copper 23 AWG (0.57mm) and is UL listed with a CM fire rating. It is designed for use in horizontal cabling situations and supplied in 305m (1,000ft) easy pull out boxes. 2D4P6AILSF3B,BU PHYSIC AL SPECIFIC ATION Rated Temperature (˚C) Product Standard Certification Flammability Test Application Reference Standard 75 UL FT4 Horizontal wiring in LAN UL Subject 444, AS/NZS 3080:2003, ISO/IEC 11801 2002, ANSI/TIA/EIA-568-C Series and ANSI/TIA/EIA-568-B.2-10 (draft) Connecting Hardware Standards, IEC61156-5 Conductor Insulation Filler Drain Wire Shield Jacket MECHANICAL CHARACTERISTICS Test Object Test Material Before Tensile Strength (Kg/mm2) Bend Radius Jacket LSZH ≥1.05 87 CONSTRUCTION Conductor AWG Conductor Dia. Nom. (mm) Insulation Average Thickness (mm) Insulation Diameter (±0.10mm) Filler Jacket Average Thickness (±0.05mm) Min. Point Thickness (mm) Outer Diameter (±0.2mm) Drain Wire Shield Coverage (%) Solid bare copper 23 0.60 PE 0.27 1.15 PE LSZH 0.60 0.43 7.30 YES Aluminium/Polyester ≥125% ELECTRICAL CHARACTERISTICS Frequency Attenuation (MHz) (dB/100m) 1 4 8 10 16 20 25 31.25 62.50 100 200 250 300 400 500 88 2.1 3.8 5.3 5.9 7.5 8.4 9.4 10.5 15.0 19.1 27.6 31.1 34.3 40.1 45.3 NEXT (dB) PSNEXT (dB) 74.3 65.3 60.8 59.3 56.2 54.8 53.3 51.9 47.4 44.3 39.8 38.8 37.1 35.3 33.8 72.3 63.3 58.8 57.3 54.2 52.8 51.3 49.9 45.4 42.3 37.8 36.6 35.1 35.1 31.8 ELFEXT PSELFEXT (dB/100m) (dB/100m) 67.8 55.8 49.7 47.8 43.7 41.8 39.8 37.9 31.9 27.8 21.8 19.8 18.3 15.8 13.8 64.8 52.8 46.7 44.8 40.7 38.8 36.8 34.9 28.9 24.8 18.8 16.8 15.3 12.8 10.8 RL Delay PSANEXT PSAACRF 20.0 23.0 24.5 25.0 25.0 25.0 24.3 23.6 21.5 20.1 18.0 17.3 16.8 15.9 15.2 570 552 547 545 543 542 541 540 539 538 567 536 536 536 536 67.0 67.0 67.0 67.0 67.0 67.0 67.0 67.0 65.6 62.5 58.0 56.5 55.3 53.5 52.0 67.0 66.2 60.1 58.2 54.1 52.2 50.2 48.3 42.3 38.2 32.2 30.2 28.7 26.2 24.2 CATALOGUE NUMBER DESCRIPTION 2D4P6AILSF3B,BU 4 Pair Unscreened UTP Category 6A FTP LSZH Cable, 305m Box (Blue Only) 1.0-100.0MHz Input Impedance (Ohms) 100 ± 15 1.0-250.0MHz Delay Skew (ns/100m) ≤45 Pair-to-Ground Capacitance Unbalance (pF/100m) ≤330 Max. Conductor DC Resistance 20˚C (Ohms/km) 93.8 Resistance Unbalance (%) ≤5 CLIPSAL DATACOMMS | CATEGORY 6A FTP RJ45 SOLUTION | CABLE MANAGEMENT Clipsal titanium® Cable Management Panel Deep The Clipsal titanium® Cable Management Panel is a 1 rack unit (1RU) item designed for use in 19” rack environments, managing patch cords that are connected between patch panels and/or active switches. The product is recommended for mounting between every second row of patch panels/active switches. The unique clips provide a quick and simple means of installing the panel in the rack or cabinet. The rings have been designed to facilitate easy insertion and removal of the patch leads, necessary in dynamic environments where moves and changes are required. DIMENSIONS Product RJ1UCMPC A B C 44mm 48mm 100mm RJ1UCMPC Clipsal titanium® styling A Rack Clips for easy mounting B C RJ1UCMPC Reinforced cable rings PRODUC T FEATURES • Clip on cover (patented). • Rack mount clips eliminate the need for cage nuts and screws. • Cavities behind each ring provide additional space for cable slack. • Additional depth on cable rings ensures compliance with minimum bend radius requirements. • Complements Clipsal titanium® patch panel styling. • 100mm cable ring depth. CUSTOMER BENEFITS • Quick product installation using rack mount clips. CATALOGUE NUMBER DESCRIPTION RJ1UCMPC 1RU Clipsal titanium® Cable Management Panel, Deep 89 CLIPSAL DATACOMMS | CATEGORY 6A FTP RJ45 SOLUTION | CABLE MANAGEMENT Clipsal Side Rings The side rings are typically used in frames or cabinets to provide vertical patch cord management. These rings have several features that make them stand out. The “ring and lock” design utilises proven plastic hinge technology to guide patch cords. These rings have unique teeth locks that are easy to open and snap back to lock tight again should you need to open the rings. The rings can be mounted with patch panels or directly onto the vertical panel mounts (VPM) of the equipment frame. RJ1HUDSR MECHANICAL CHARACTERISTICS Test Object Jacket Ring Material Polypropylene, Graphite Grey DIMENSIONS Product Height Width Depth RJ1HUSSR 42mm 43mm 65mm RJ1HUDSR 42mm 43mm 130mm RJ1HUSSR PRODUC T FEATURES • Graphite Grey. • Teeth locks that provide easy access and security for patch cords. • Available in 1RU deep and shallow versions. CUSTOMER BENEFITS • The key benefit is the “ring and lock” design which not only makes the loading and unloading of patch cords or cables easier but also secures them in place, keeping the cabinet neat and uncluttered. This makes circuit identification and administration for the customer far more efficient. • The two rings’ depths enable the customer to manage the cabinet or rack better depending on the amount of patch cords being used. 90 CATALOGUE NUMBER DESCRIPTION RJ1HUSSR 1RU Shallow Side Ring RJ1HUDSR 1RU Deep Side Ring CLIPSAL DATACOMMS | CATEGORY 6A FTP RJ45 SOLUTION | MUTOS MUTOs M U LT I U S E R T E L E CO M M U N I C AT I O N S O U T L E T S ( M U TO ) Clipsal provides a range of MUTO options which are ideal in situations where a number of terminals are required in the one area. Floor outlet housings can also be used in desktop applications where up to 12 services are required, and fit all standard Clipsal face plates. All Clipsal 2000 Series wall plates will fit into the housing and surrounds of the MUTO's. 224/1 2000/3 Loaded 224/1 Floor Outlet Loaded Faceplate 2000H2 CATALOGUE NUMBER DESCRIPTION 224/1 Floor Outlet Housing for two Standard Plates. Can be used on desktops 224/2 Floor Outlet Housing for four Standard Plates. Can be used on desktops 2000/2 Two Gang Flush Surround, Curved Sides. Suits all 2000 Series grids 2000/3 Three Gang Flush Surround, Curved Sides. Suits all 2000 Series grids 2000/4 Four Gang Flush Surround, Curved Sides. Suits all 2000 Series grids 2000H2 Horizontal Two Gang Flush Surround, Curved Sides. Suits all 2000 Series grids 2000H4 Horizontal Four Gang Flush Surround, Curved Sides. Suits all 2000 Series grids 91