Transcript
Applied Motion Products, Inc. 404 Westridge Dr. Watsonville, CA 95076, USA
1-800-525-1609 Tel (831) 761-6555 Fax (831) 761-6544
Product Datasheet www.Applied-Motion.com
7080 DC Microstep Drive
Product Features Step & direction control Full, half, and microstep resolutions (up to 50,800 steps/rev) Up to 7.0 amps/phase Idle current reduction (switch selectable) Screw terminal connectors Dip switch setup Enable input (inhibit) Optically isolated inputs, 5-24 VDC Short circuit and over-temperature protection
Description
The 7080 step motor drive, for use in step & direction applications, can microstep 2-phase step motors at resolutions of 200 to 50,800 steps per revolution. The 7080 employs MOSFET, three-state switching amplifiers and opto-isolated input circuits. The 7080 also includes an automatic feature to lower motor current by 50% anytime the motor is left at rest for more than one second. This feature is switch selectable. The 7080 regulates motor current by chopping at a constant, inaudible frequency. Motor phase current and step resolution are selected by a DIP switch.
Specifications
Model Number: Part Number: Supply Voltage: Supply Voltage Type:
7080 1000-134 24-80 VDC DC
Control Modes:
Step & Direction
Output Current:
0.8-7.0 A/phase
Encoder Feedback: Step Resolution:
Idle Current Reduction:
No Full Half Microstepping 50%
Setup Method:
Switch / potentiometer
Digital Inputs:
3
Digital Outputs:
1
Analog Inputs:
0
Dimensions:
6.0 x 3.0 x 2.0 inches
Operating Temperature Range:
0-70 °C
Ambient Temperature Range:
0-50 °C
Ambient Humidity: Status LEDs: Circuit Protection:
90% max, non-condensing 3 red (power, temp, short) Short circuit Over-temp
Downloads
Manuals: Datasheet: Family Datasheet: 3D Drawing: Agency Approvals:
7080_Users_Manual.pdf http://s3.amazonaws.com/applied-motion-pdf/7080.pdf 7080_Datasheet.pdf 7080.igs 7080_CE_DOC.pdf
