Transcript
Product Datasheet V01 17
EPA BlowVac Special Description Special field service and EPA blowVac to remove dust and debris from advanced electronic equipment. Highly sensitive to dust and static build up in fields as telecom, office automation, scientific, medical and semiconductor and electronics industries requiring top level „electronic care”. „BlowVac“ = blower and vacuum cleaner in one. No carrying nor investment multiple appliances. Superb suction- and blowpower at low electricity consumption (cost) by the use of high efficiency motor. Gentle controlled ESD-safe static discharge on tip blow/vacuum nozzles to earth power outlet.
05-0101-0555-SE
Fully EPA compliant to IEC 61340-5-1. Top quality electrical and electronic parts for utmost reliability and global use. Thermal cut-out and AFI/EMC filter equipped. Durable compact housing. EPA hose assembly extending full 130 cm. EPA blow and vacuum hard crevice nozzle and soft rubber nozzle. Leather shoulderstrap. Special 1,2 litre multilayer filterbag. Advanced 5-stage (pre-motor) filter system.
Properties Material of housing:
Permanent dissipative: 107-108 Ohm
Dimensions:
Length:
31,5 cm
Width:
12 cm
Height:
18,5 cm
Weight:
2,2 kg (appliance only)
Capacity:
approx. 1 litre
Motor power:
max. 880 W
Die Angaben in diesem Merkblatt sind als Richtlinie gedacht. Sie wurden aufgrund umfangreicher Untersuchungen zusammengestellt. Eine Rechtsverbindlichkeit kann daraus nicht abgeleitet werden. Technische Fragen richten Sie bitte an
[email protected]. We believe all the information in these pages including technical data to be reliable. However we make no warranties expressed or implied and assume no liability regarding any use of this information. For technical support please write to
[email protected].
Copyright © 2017 Stat-X Austria | France | Germany | Hungary
Product Datasheet V01 17
Max suction power:
160 mbar
Detachable cordset:
3 m long
Voltage:
100V/120V/220-240V 50/60 Hz versions
Noise level:
72 decibel (dB)
Order information
05-0101-0555S Vacuum cleaner, 880 W 555-S
05-0101-0555SE Vacuum cleaner, 880 W 555-SE with power control
Optional accessories (for request) Filters:
PH-723
PH-722
Disposable multi-ply filterbagset, 5 pcs
Disposable multi-ply filterbagset, 10 pcs
PH-725 Micromotorfilter, white + electrostatic charged filtermedia
PH-727 Micromotorfilter, HEPA H13 + activated carbon filtermedia
PH-705 ESD Medical exit air filter
PH-706 ESD Exit air deflector
PH-726 micromotorfilter Hepa H13, white+ electrostatic charged filtermedia
Further accessories: Die Angaben in diesem Merkblatt sind als Richtlinie gedacht. Sie wurden aufgrund umfangreicher Untersuchungen zusammengestellt. Eine Rechtsverbindlichkeit kann daraus nicht abgeleitet werden. Technische Fragen richten Sie bitte an
[email protected]. We believe all the information in these pages including technical data to be reliable. However we make no warranties expressed or implied and assume no liability regarding any use of this information. For technical support please write to
[email protected].
Copyright © 2017 Stat-X Austria | France | Germany | Hungary
Product Datasheet V01 17
PH-707 ESD Replacement hose assembly
PH-707 ESD XL Super stretch replacement hose assembly. L= 160 cm-800 cm
PH-710 ESD Carrying case
PH-710 BKC ESD Kit case, black. Accomodates: hand tools, BlowVac (GS). Elastic lid toolholder system
PHU-05 ESD Long soft rubber nozzle
PHU-09 ESD Low vacuum use only! PHU-05 clw brush head L = 340 mm, = 14/23 mm
PHU-11 ESD D-shaped brush nozzle
PH-708L ESD Two part blow assembly L= 105 – 380 cm
PH-709 compact carrying bag – NOT ESD SAFE
PH-711 BKC ESD Kit case, black. Accomodates: hand tools, BlowVac (GS). Elastic lid toolholder system
PHU-05 ESD clw brush head
PHU-08 ESD PHU-05 ESD clw brush head L=340 mm, =14/23 mm
PHU-12 ESD D-shaped brush nozzle
PHU-13 ESD D-shaped brush nozzle
PHU-07 ESD
Die Angaben in diesem Merkblatt sind als Richtlinie gedacht. Sie wurden aufgrund umfangreicher Untersuchungen zusammengestellt. Eine Rechtsverbindlichkeit kann daraus nicht abgeleitet werden. Technische Fragen richten Sie bitte an
[email protected]. We believe all the information in these pages including technical data to be reliable. However we make no warranties expressed or implied and assume no liability regarding any use of this information. For technical support please write to
[email protected].
Copyright © 2017 Stat-X Austria | France | Germany | Hungary
Product Datasheet V01 17
PHU-16 ESD Crevice nozzle
PHU-18 ESD Extension hose assy + connector. 85-350 cm
PHU-19 ESD modified PHU-05 ESD clw mini crevice nozzle
PHU-20 ESD Long soft rubber nozzle
PHU-22 ESD Small moulded upholstry nozzle
PHU-23 ESD Large aluminium upholstry nozzle
PHU-26 ESD Soft rubber bulk pick up nozzle L = 150 mm, = 35 mm
PHU-27 ESD Swivel action alu floor nozzle with removabel brush. W=330 mm
PHU-28 ESD Special mini extension rod set (3 pcs), fully (both in-and outside) electroplated steel
Die Angaben in diesem Merkblatt sind als Richtlinie gedacht. Sie wurden aufgrund umfangreicher Untersuchungen zusammengestellt. Eine Rechtsverbindlichkeit kann daraus nicht abgeleitet werden. Technische Fragen richten Sie bitte an
[email protected]. We believe all the information in these pages including technical data to be reliable. However we make no warranties expressed or implied and assume no liability regarding any use of this information. For technical support please write to
[email protected].
Copyright © 2017 Stat-X Austria | France | Germany | Hungary