Transcript
Product details for VHW-HWPS-B Printed 30/09/2017 20:08
VHW-HWPS-B Veracity Powerstar Ethernet/PoE Over Coax Unit - BASE Unit Ethernet Speed 100Mbps Connectors BNC Integrated PoE PoE (802.3af/at) Stock Level: Product in stock
$315.00 + GST
Description HIGHWIRE PowerStar lets you install IP cameras easily, quickly, and reliably, without the disruption and expense of installing new cable. Support for your camera is assured, thanks to HIGHWIRE's unique full-rate Ethernet over Coax technology, which has been tested and trusted by thousands of IP installers worldwide over the past five years. And now with POE over Coax, you can deliver up to 25 watts of POE power to the camera as well, eliminating the complexity of installing local power supplies. Delivering full network connectivity and standardised, centrally-sourced power without re-cabling, HIGHWIRE removes many of the barriers to upgrading systems from analogue to digital. With the familiarity of coaxial cable and the reliability and cost advantages of POE, HIGHWIRE PowerStar is an effective choice for the installation of new IP video systems where cable runs may be very long or inaccessible. Connecting HIGHWIRE PowerStar units back-to-back allows the network signal to be repeated without local power, enabling extension of Ethernet up to 4km (2.5 miles). The ability to convert coax into a network connection without requiring power has many advantages in upgrading CATV or satellite systems in hotels or other buildings, among other applications. HIGHWIRE technology has been successfully used with 50 ohm cable and many other non-video types. Features BASE POE in IEEE 802.3af or 802.3at, class 4 (25.5W max) 10 watts of POE at 265m (880ft) of 22AWG CCS RG-59 from a Veracity power supply 10 watts of POE at 300m (1000ft) of 20AWG RG-59 from an 802.3af POE switch 20 watts of POE+ at 300m (1000ft) of 20AWG RG-59 from an 802.3at POE+ switch 25 watts of POE+ at 500m (1600ft) of 14AWG RG-11 from a Veracity power supply Unit power 1.5 watts max DC power input 44-57 volts, 0.7 amps max, class 2 isolated, screw terminal 100Base-T full-duplex Ethernet with auto-negotiation Patch or crossover cables auto-detected
Specifications Details Manufacturer's Product Code Interface 1 Connector type Interface 1 Cable type Interface 1 Range Interface 1 Bandwith Interface 2 Connector type Interface 2 Cable type Interface 2 Bandwith
VHW-HWPS-B BNC 75 Ohm Any 75 Ohm coaxial (other impedances supported) Up to 300m [1100ft] on RG59 or 500 metres [1600 feet] on RG11 at full rate. 200 Mbps (total up + down) RJ45 Patch or crossover, auto-detected 100Base-T full-duplex with auto-negotiation 1/2
Product details for VHW-HWPS-B Printed 30/09/2017 20:08
Details Operating Voltage
40-57 volts, 0.7 amps maximum, class 2 isolated, detachable screw terminal 1.5 watts IEEE 802.3af (POE) or IEEE 802.3at (POE Plus), 2-event, power class 4 L 104mm W 54mm H24mm (84mm excluding connector)
Max Power Consumption PoE Input Dimensions
Resources Manufacturer Website Details Warranty
Standard 12 Month RTB
2/2 Powered by TCPDF (www.tcpdf.org)
