Transcript
PRODUCT INFORMATION Elettromedia - September 2015
PRODUCT INFORMATION MPK 165P.3 3 MP 25.3 4 MPK 165.3 & MPK 130.3 5 MPK 163.3 & MP 70.3 6 MPX 165.3 7 MPX 690.3 8 eID program 9 Technical Sheet 10 About us 21 Press Kit 22
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 2
All Specifications Subject to Change Without Notice_15.B
Elettromedia - September 2015
THE MILLE LINE IS ENHANCED WITH SYSTEMS, COAXIALS AND THE PRO COMPONENTS, DEDICATED TO THE ENTHUSIASTS YEARNING FOR THE AUTHENTIC HERTZ MILLE LISTENING EXPERIENCE. THE ACCURATE ELECTROACOUSTIC DESIGN TOGETHER WITH THE INNOVATIVE AUTOMATED MANUFACTURING PROCESS PROVIDE THE SPEAKERS WITH A GREAT PRICE/PERFORMANCE RATIO, MAKING THEM AFFORDABLE TO A WIDER RANGE OF CAR HIFI FANS.
MPK 165P.3
MP 165P.3 woofer 3D cut-view with its 3 Ω impedance “Long Throw” voice coil and oversized magnet.
The MPK 165P.3 timbre balance is entrusted to the MPCX 2P.3 crossover featuring a copper inductor with a 1 mm diameter wire to filter the MP 165P.3, which, with its nominal 3 Ω requires high impulse currents. The tweeter MP 25.3 12dB/Octave crossover is built with extremely high quality 160V bi-metallized polyester film capacitor and an air coil inductor. The tweeter (MP 25.3) level control (0/+2.5dB) provides the ability to adapt the system response to the listener preferences and considering the components installation position.
MPK 165P.3: MP 165P.3 woofer, MP 25.3 tweeter, MPCX 2P.3 crossover.
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 3
All Specifications Subject to Change Without Notice_15.B
The MPK 165P.3 system energy in the mid-low range ensures a unique listening experience, creating the ideal set up alongside a powerful subwoofer section. The MP 165P.3 woofer electroacoustic parameters have been forged to give it the pure and solid sound of an authentic mid-bass, designed for high dynamic systems. The voice coil with a generous 14 mm height, has a nominal 3 Ω impedance in addition to an increased power handling. These features provide the ability to maximally exploit the power of the Hertz HCP and HDP amplifiers as well as all the 2 Ω stable electronics. The ferrite 95 mm diameter magnet enables a +/-4.5 mm voice coil linear excursion, ensuring utmost control at all times. The Boundary Free Surround moves a bigger amount of air, and the V-cone® profile improves the offaxis dispersion, the real in-car listening condition. The sophisticated aluminium alloy basket neutralizes the undesired vibrations.
MP 25.3 The MP 25.3 tweeter, featuring Tetolon dome and 25 mm voice coil, provides a very wide, linear frequency response. Thanks to its “Center Tuning Duct”, positioned in the center of the powerful Neodymium magnetic circuit, exchange of air between dome and rear load chamber is ensured, fine-tuning the acoustics to perfection. The resulting very low resonance frequency is also functional for the woofer crossover point, elevating the sound stage.
Center Tuning Duct geometry developed with acoustic pressure FEM simulation.
MP 25.3 anechoic frequency response highliting excellent linearity.
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 4
All Specifications Subject to Change Without Notice_15.B
MP 25.3 3D cut-view showing Center Tuning Duct geometry.
MPK 165.3 & MPK 130.3 The MPK 165.3 system has been designed to ensure a wide low frequency response, even in cars with no space for a subwoofer. Thanks to the V-cone® and Boundary Free Surround technologies the MP 165.3 woofer boast outstanding dispersion features and generates high SPL with compact dimensions.
MPK 165.3: MP 165.3 woofer, MP 25.3 tweeter, MPCX 2.3 crossover.
The MPK 130.3 system provides the same timbre setting as the MPK 165.3. The MP 130.3 woofer Boundary Free Surround suspension maximizes the SPL pressure generated maintaining the same installation diameter, while the generous mobile group excursion allows an elevated power handling.
MPCX 2.3 cut view shows the components quality: pure copper 1 mm wire diameter low series resistance inductors on the woofer, bi-metallized polyester film capacitors and air coil tweeter inductor.
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 5
All Specifications Subject to Change Without Notice_15.B
The dedicated crossover MPCX 2.3 has been designed to exploit the wide extension of the MP 165.3 and MP 130.3 woofers in the MPK 165.3 and MPK 130.3 systems, ensuring a natural transition towards the MP 25.3 tweeter, for maximum natural acoustic emission. The 1mm low parasitic resistance copper filter coil of the woofer maximizes its efficiency. The MPCX 2.3 crossover features tweeter level (0/+2 dB) to calibrate the MP 25.3 acoustic emission level comparing it to the woofer one.
MPK 163.3 & MP 70.3 The three way MPK 163.3 system is dedicated to those who want the best: the MP 70.3 midrange featuring Neodymium double magnet inside the coil produces an enthralling mid range, perfect to combine with the powerful mid-low of the MP 165.3 woofer as well as with the detailed high range of the MP25.3 tweeter. The 20 mm coil of the MP 70.3 maximizes the dynamics; the V-cone® profile enhances off-axis dispersion and the Boundary Free Surround allows for a wider extension towards the low frequency range. The dedicated MPCX 3.3 crossover provides optimized crossover points to exploit the midrange remarkable extension using ultra-selected components.
MPK 163.3: MP 165.3 woofer, MP 70.3 midrange, MP 25.3 tweeter, MPCX 3.3 crossover.
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 6
All Specifications Subject to Change Without Notice_15.B
MP 70.3 Symmetrical Dual Neodymium magnet refined with FEM magnetic simulation.
MPX 165.3
MPX 165.3 3D cut-view showing Concentric Coaxial 20mm Tweeter with Center Tuning Duct.
MPX 165.3 FEM acoustic pressure wave dispersion simulation at 10kHz in typical door application (45° off-axis).
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 7
All Specifications Subject to Change Without Notice_15.B
The Mille PRO coaxials provide a sound stage and a power handling that can be compared to those of a two way system. The MPX 165.3 coax tweeter concentric to the woofer allows for one single linear-phase emission point, for a natural timbre providing a detailed sound stage. Thanks to the “Center Tuning Duct” geometry, the tweeter resonance frequency is especially low and the employment of damping materials for the inside provides for a linear acoustic emission. The acoustic lens optimizes its off-axis response, which is typical with door installation of coax speakers; besides, the 36 mm diameter woofer generates deep and controlled bass frequencies.
MPX 690.3 The three-way MPX 690.3 coax, optimized for rear deck mount, features a 28 mm Tetolon tweeter with Neodymium magnet and faceplate profile maximizing the off-axis dispersion. A supertweeter strengthens the emission of very high frequencies and the basket radial venting system ensures low operating temperatures. The sound has an impressive impact and ensures perfect control, also with extensive high dynamic listening.
PASSION FOR MUSIC AND LOVE FOR TECHNICAL CHALLENGES MAKE HERTZ STAND OUT. EACH MILLE PRO COMPONENT CONTRIBUTES TO GENERATE EMOTIONS IN THE SYSTEM, RE-SETTING ONCE AGAIN THE PERFORMANCE LEVEL FOR THE IN-CAR MUSIC LISTENING EXPERIENCE.
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 8
All Specifications Subject to Change Without Notice_15.B
MPX 690.3 tweeter & supertweeter faceplate design optimized for linear frequency response on horizontal installations.
Scan Discover Identify eID (Elettromedia Identification) is the exclusive technology providing the traceability of the Mille.3 products from their birth on. Once the test phase has been passed, the code linked to destination country/market is applied. When purchasing the product, by scanning the code, the user can check through the web the information about the product and can log into the registration page; by filling it out, the user will be entitled to one additional year of warranty coverage*. This way the user will have the certainty of owning a genuine Hertz product, purchased through the official channel.
Video of eID technology
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 9
All Specifications Subject to Change Without Notice_15.B
*in those countries where the agreement with the partner has been made.
MPK 165P.3 TWO WAY SYSTEM
230 W
TECHNICAL SPECIFICATION Component
2-way system
Size mm (in.)
165 (6.5)
Tweeter diaphragm mm (in.)
29 (1.14)
MP 25.3:
Voice Coil Ø Woofer
mm (in.)
25 (1)
Tweeter
mm (in.)
25 (1)
W peak
230
W continuos
115
Sensitivity
dB SPL
93
Impedance
Ω
3
Frequency Response
Hz
45 ÷ 22,5k
Woofer
Lo-pass 4 kHz @ -6 dB Oct.
Tweeter
Hi-pass 4 kHz @ -12 dB Oct.
Tweeter Level
0 / +2.5 dB
Power Handling
Crossover Adjustment
Weight of one component Woofer
kg (lb)
1.20 (2.65)
Tweeter
kg (lb)
0.07 (0.15)
Crossover
kg (lb)
0.17 (0.37)
ELECTRO-ACOUSTIC PARAMETERS
MP 25.3
MP 165P.3
D
mm
29
132
Xmax
mm
-
±4.5
Re
Ω
3,9
2,6
Fs
Hz
1200
75
Le
mH
0,02
0,28
Vas
I
-
8
Mms
g
0,17
15,1
Cms
mm/N
0,1
0,3
BL
T •m
1,6
5,45
Qts
0,55
0,56
Qes
1,98
0,63
Qms
0,57
5,2
91
94
Spl
dB
1. 2. 3. 4. 5. 6. 7.
Tetolon fiber soft dome, for a natural yet detailed reproduction of musical nuances. “Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion. High density flux Neodymium magnet, optimized for utmost control during high energy dynamic transients in the mid-high frequency range. 25mm ferrofluid-cooled mobile voice coil. Rear chamber filled with selected damping material and sized for lower Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point. Faceplate featuring FEM (Finite Element Modeling) optimized geometry, for high linearity in off-axis installations. Wide array of installation accessories, for an easy OEM integration.
MP 165P.3: 1. 2. 3. 4. 5. 6. 7.
3 ohm nominal impedance to exploit all the amplifier’s power. 14 mm height pure copper voice coil wound on a Polyamide former, for exceptional power handling. 95 mm diameter magnet to maximize the control over the whole excursion. Exponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically optimized for utmost linearity and dispersion in the mid frequency range. “Boundary Free” rubber surround, for improved efficiency and wider mid-bass frequency. Low mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo. Full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.
MPCX 2P.3: 1. 2. 3. 4.
Two-position (0 / +2.5 dB) switch for tweeter level adjustments, to fine-tune the transducers emission. 160V extremely high quality bi-metallized polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies. 1mm pure copper wire low series resistance inductors, for low dissipation losses on the woofer section where high transient currents are demanded. Small footprint design for easy installation, with top vent grille for efficient heat dissipation.
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 10
All Specifications Subject to Change Without Notice_15.B
Woofer
MPK 165.3 TWO WAY SYSTEM
220 W
TECHNICAL SPECIFICATION Component
2-way system
Size mm (in.)
165 (6.5)
Tweeter diaphragm mm (in.)
29 (1.14)
MP 25.3:
Voice Coil Ø Woofer
mm (in.)
25 (1)
Tweeter
mm (in.)
25 (1)
W peak
220
W continuos
110
Sensitivity
dB SPL
92
Impedance
Ω
4
Frequency Response
Hz
40 ÷ 22,5k
Woofer
Low pass 3,5kHz @ -6 dB Oct.
Tweeter
Hi pass 3,5kHz @ -12 dB Oct.
Tweeter Level
0 / +2 dB
Power Handling
Crossover Adjustment
Weight of one component Woofer
kg (lb)
1.07 (2.36)
Tweeter
kg (lb)
0.07 (0.15)
Crossover
kg (lb)
0.16 (0.35)
ELECTRO-ACOUSTIC PARAMETERS
MP 25.3
MP 165.3
D
mm
29
132
Xmax
mm
-
±4
Re
Ω
3,9
3,1
Fs
Hz
1200
70
Le
mH
0,02
0,3
Vas
I
-
9,5
Mms
g
0,17
14,9
Cms
mm/N
0,1
0,36
BL
T •m
1,6
5,5
Qts
0,55
0,58
Qes
1,98
0,67
Qms
0,57
4,6
91
93
Spl
dB
1. 2. 3. 4. 5. 6. 7.
Tetolon fiber soft dome, for a natural yet detailed reproduction of musical nuances. “Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion. High density flux Neodymium magnet, optimized for utmost control during high energy dynamic transients in the mid-high frequency range. 25mm ferrofluid-cooled mobile voice coil. Rear chamber filled with selected damping material and sized for lower Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point. Faceplate featuring FEM (Finite Element Modeling) optimized geometry, for high linearity in off-axis installations. Wide array of installation accessories, for an easy OEM integration.
MP 165.3: 1. 2. 3. 4. 5. 6.
Pure copper voice coil wound on a Polyamide former for high power handling combined with very low intermodulation distortion of vocals. Exponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically optimized for utmost linearity and dispersion in the mid frequency range. “Boundary Free” rubber surround, for improved efficiency and wider mid-bass frequency. High density flux ferrite magnet combined with very low carbon content iron plates, for low distortion at high power levels. Low mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo. Full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.
MPCX 2.3: 1. 2. 3. 4.
Two-position (0 / +2 dB) switch for tweeter level adjustments, to fine-tune the transducers emission. 160V extremely high quality bi-metallized polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies. 1mm pure copper wire low series resistance inductors, for low dissipation losses on the woofer section where high transient currents are demanded. Small footprint design for easy installation, with top vent grille for efficient heat dissipation.
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 11
All Specifications Subject to Change Without Notice_15.B
Woofer
MPK 163.3 THREE WAY SYSTEM
300 W
MP 25.3:
TECHNICAL SPECIFICATION
1. 2. 3. 4. 5. 6. 7.
3-way system
Size Woofer
mm (in.)
165 (6.5)
Midrange
mm (in.)
70 (3)
Tweeter diaphragm mm (in.)
29 (1.14)
Voice Coil Ø Woofer
mm (in.)
25 (1)
Midrange
mm (in.)
20 (0.8)
Tweeter
mm (in.)
25 (1)
W peak
300
W continuos
150
Sensitivity
dB SPL
92
Impedance Frequency Response
Ω
4
Hz
40 ÷ 22,5k
Woofer
Crossover
Midrange Tweeter
Lo-Pass 450Hz - 6 dB Oct. Band-Pass 450 ÷ 5.5k Hz 6 dB Oct. Hi-Pass 5.5kHz - 12 dB Oct.
Tweeter level
0 / +2 dB
Power Handling
Adjustment
MP 70.3:
Midrange level 0 / +2 dB Weight of one component Woofer
kg (lb)
1.07 (2.36)
Midrange
kg (lb)
0.17 (0.37)
Tweeter
kg (lb)
0.07 (0.15)
Crossover
kg (lb)
0.43 (0.95) MP 25.3
MP 70.3
MP 165.3
D
mm
29
65
132
Xmax
mm
-
±1,5
±4
Re
Ω
3,9
3,7
3,1
Fs
Hz
1200
110
70
Le
mH
0,02
0,12
0,3
Vas
I
-
1
9,5
Mms
g
0,17
2,9
14,9
Cms
mm/N
0,1
0,7
0,36
BL
T •m
1,6
2,8
5,5
Qts
0,55
0,82
0,58
Qes
1,98
1
0,67
0,57
4,6
4,6
91
88
93
Spl
dB
1. Symmetrical dual Neodymium magnet structure specifically developed with FEM (Finite Element Modeling) simulations, for superior dynamics and control. 2. 20 mm CCAW double layer voice coil wound on a Polyamide former with 8 decompression holes, for exceptional power handling and compression-free reproduction. 3. Exponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically optimized for utmost linearity and dispersion in the mid-high frequency range. 4. “Boundary Free” rubber surround, for better efficiency and wider mid-bass frequency. 5. Anti-vibration rubber magnet cover, to damp spurious vibrations, removable to fit limited mounting depth installations. 6. Acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo. 7. Full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.
MP 165.3:
ELECTRO-ACOUSTIC PARAMETERS
Qms
Tetolon fiber soft dome, for a natural yet detailed reproduction of musical nuances. “Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion. High density flux Neodymium magnet, optimized for utmost control during high energy dynamic transients in the mid-high frequency range. 25mm ferrofluid-cooled mobile voice coil. Rear chamber filled with selected damping material and sized for lower Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point. Faceplate featuring FEM (Finite Element Modeling) optimized geometry, for high linearity in off-axis installations. Wide array of installation accessories, for an easy OEM integration.
1. Pure copper voice coil wound on a Polyamide former for high power handling combined with very low intermodulation distortion of vocals. 2. Exponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically optimized for utmost linearity and dispersion in the mid frequency range. 3. “Boundary Free” rubber surround, for improved efficiency and wider mid-bass frequency. 4. High density flux ferrite magnet combined with very low carbon content iron plates, for low distortion at high power levels. 5. Low mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo. 6. Full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.
MPCX 3.3: 1. 2. 3. 4.
Two-position (0 / +2 dB) switch for tweeter & midrange level adjustments, to fine-tune the transducers emission according to their installation position. 100V extremely high quality bi-metallized polyester film capacitors in the tweeter section, for maximum sound transparency and neat hi-frequencies. 1mm pure copper wire low series resistance inductors, for low dissipation losses on the woofer section where high transient currents are demanded. Compact footprint design for easy installation, with top vent grille for efficient heat dissipation.
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 12
All Specifications Subject to Change Without Notice_15.B
Component
MPK 130.3 TWO WAY SYSTEM
200 W
TECHNICAL SPECIFICATION Component
2-way system
Size mm (in.)
Tweeter diaphragm mm (in.)
MP 25.3:
130 (5) 29 (1.14)
Voice Coil Ø Woofer
mm (in.)
25 (1)
Tweeter
mm (in.)
25 (1)
W peak
200
W continuos
100
Sensitivity
dB SPL
91
Impedance
Ω
4
Frequency Response
Hz
60 ÷ 22,5k
Midrange
Low pass 3,5 kHz @ -6 dB Oct.
Tweeter
Hi pass 3,5k Hz @ -12 dB Oct.
Tweeter Level
0 / +2 dB
Power Handling
Crossover Adjustment
Weight of one component Woofer
kg (lb)
0.95 (2.09)
Tweeter
kg (lb)
0.07 (0.15)
Crossover
kg (lb)
0.16 (0.35)
ELECTRO-ACOUSTIC PARAMETERS
MP 25.3
MP 130.3
D
mm
29
110
Xmax
mm
-
±2,75
Re
Ω
3,9
3,1
Fs
Hz
1200
90
Le
mH
0,02
0,25
Vas
I
-
3
Mms
g
0,17
10,5
Cms
mm/N
0,1
0,24
BL
T •m
1,6
5,3
Qts
0,55
0,64
Qes
1,98
0,74
Qms
0,57
5,1
91
92
Spl
dB
1. 2. 3. 4. 5. 6. 7.
Tetolon fiber soft dome, for a natural yet detailed reproduction of musical nuances. “Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion. High density flux Neodymium magnet, optimized for utmost control during high energy dynamic transients in the mid-high frequency range. 25mm ferrofluid-cooled mobile voice coil. Rear chamber filled with selected damping material and sized for lower Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point. Faceplate featuring FEM (Finite Element Modeling) optimized geometry, for high linearity in off-axis installations. Wide array of installation accessories, for an easy OEM integration.
MP 130.3:
1. Pure copper voice coil wound on a Polyamide former combining excellent power handling combined with fast musical transients response. 2. Exponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically optimized for utmost linearity and dispersion in the mid frequency range. 3. “Boundary Free” rubber surround, for improved efficiency and wider mid-bass frequency. 4. High density flux ferrite magnet combined with very low carbon content iron plates, for low distortion at high power levels. 5. Low mounting depth, acoustically transparent aluminium alloy basket with spider vent holes. 6. Full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.
MPCX 2.3: 1. 2. 3. 4.
Two-position (0 / +2 dB) switch for tweeter level adjustments, to fine-tune the transducers emission. 160V extremely high quality bi-metallized polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies. 1mm pure copper wire low series resistance inductors, for low dissipation losses on the woofer section where high transient currents are demanded. Small footprint design for easy installation, with top vent grille for efficient heat dissipation.
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 13
All Specifications Subject to Change Without Notice_15.B
Woofer
MP 25.3 COMP TWEETER
120 W
TECHNICAL SPECIFICATION Component
Tweeter
Tweeter diaphragm
mm (in.)
Voice Coil Ø
29 (1.14) 25 (1)
Power Handling
W peak
120 (Hi-Pass filtered @ 2,5kHz - 12 dB Oct.)
Impedance
Ω
4
Frequency Response
Hz
1.4k ÷ 22.5k
Magnet size D x d x h
mm (in.)
24.5 x 6 x 3.5 (0.96 x 0.24 x 0.14)
Weight of one speaker
kg (lb.)
0.07 (0.14)
Magnet
Neodymium
Dome/Cone
Tetolon
1. 2. 3. 4. 5. 6. 7.
Tetolon fiber soft dome, for a natural yet detailed reproduction of musical nuances. “Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion. High density flux Neodymium magnet, optimized for utmost control during high energy dynamic transients in the mid-high frequency range. 25mm ferrofluid-cooled mobile voice coil. Rear chamber filled with selected damping material and sized for lower Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point. Faceplate featuring FEM (Finite Element Modeling) optimized geometry, for high linearity in off-axis installations. Wide array of installation accessories, for an easy OEM integration.
ELECTRO-ACOUSTIC PARAMETERS D
mm
29
Re
Ω
3,9
Fs
Hz
1200
Le
mH
0,02
Vas
I
-
Mms
g
0,17
Cms
mm/N
0,1
BL
T •m
1,6
Qts
0,55
Qes
1,98
Qms
0,57 dB
91
D
C
A B C D
44 mm 41 mm 27 mm 17 mm
1.73 in. 1.61 in. 1.06 in. 0.67 in.
B A
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 14
All Specifications Subject to Change Without Notice_15.B
Spl
MP 70.3 COMP MIDRANGE
100 W
TECHNICAL SPECIFICATION Component
Midrange
Midrange size
mm (in.)
70 (3)
Voice Coil Ø
20 (0.8)
Power Handling
W peak
100 (Hi-Pass filtered @250Hz - 12 dB Oct.)
Impedance
Ω
4
Frequency Response
Hz
180 ÷ 18k
Magnet size D x d x h
mm (in.)
19.7 x 0 x 2 (0.78 x 0 x 0.08)
Centre to centre distance
mm (in.)
80 (3.15)
Weight of one speaker
kg (lb.)
0.17 (0.37)
Magnet
Neodymium
Dome/Cone
Pressed-pulp cone with cotton fibers
1. Symmetrical dual Neodymium magnet structure specifically developed with FEM (Finite Element Modeling) simulations, for superior dynamics and control. 2. 20 mm CCAW double layer voice coil wound on a Polyamide former with 8 decompression holes, for exceptional power handling and compression-free reproduction. 3. Exponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically optimized for utmost linearity and dispersion in the mid-high frequency range. 4. “Boundary Free” rubber surround, for better efficiency and wider mid-bass frequency. 5. Anti-vibration rubber magnet cover, to damp spurious vibrations, removable to fit limited mounting depth installations. 6. Acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo. 7. Full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.
ELECTRO-ACOUSTIC PARAMETERS D
mm
65
Xmax
mm
±1,5
Re
Ω
3,7
Fs
Hz
110
Le
mH
0,12
Vas
I
1
Mms
g
2,9
Cms
mm/N
0,7
BL
T •m
2,8
Qts
0,82
Qes
1
Qms
4,6 dB
88
A
87,8 mm
3.46 in.
B
73 mm
2.87 in.
C
50 mm
1.97 in.
D
44 mm
1.73 in.
E
93 mm
3.66 in.
F
17 mm
0.67 in.
D
C
E
B A
F
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 15
All Specifications Subject to Change Without Notice_15.B
Spl
MP 165P.3 COMP WOOFER
200 W
TECHNICAL SPECIFICATION Component
Woofer
Woofer size
mm (in.)
165 (6.5)
Voice Coil Ø
25 (1) W peak
200
W continuos
100
Impedance
Ω
3
Frequency Response
Hz
45 ÷ 4,5k
Magnet size D x d x h
mm (in.)
95 x 45 x 17 (3.74 x 1.77 x 0.67)
Centre to centre distance
mm (in.)
156 (6.14)
Hole diameter
mm (in.)
5 (0.2)
Weight of one speaker
kg (lb.)
1.2 (2.65)
Power Handling
Magnet
High density flux ferrite
Dome/Cone
Pressed-pulp cone with cotton fibers
*Xmech
mm (in.)
1. 2. 3. 4. 5. 6. 7.
3 ohm nominal impedance to exploit all the amplifier’s power. 14 mm height pure copper voice coil wound on a Polyamide former, for exceptional power handling. 95 mm diameter magnet to maximize the control over the whole excursion. Exponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically optimized for utmost linearity and dispersion in the mid frequency range. “Boundary Free” rubber surround, for improved efficiency and wider mid-bass frequency. Low mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo. Full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.
±7.5 (0.3)
*Xmech: maximum mechanical excursion it indicates the motion range in the speaker linear functioning area, in both ways.
ELECTRO-ACOUSTIC PARAMETERS D
mm
132
Xmax
mm
±4.5
Re
Ω
2,6
Fs
Hz
75
Le
mH
0,28
Vas
I
8
Mms
g
15,1
Cms
mm/N
0,3
BL
T •m
5,45
Qts
0,56
Qes
0,63
Qms
5,2 dB
94
A
165 mm
6.5 in.
B
141 mm
5.55 in.
C
74,5 mm
2.93 in.
D
64 mm
2.52 in.
E
183,5 mm
7.22 in.
F
29 mm
1.14 in.
D
B A
C
E
F
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 16
All Specifications Subject to Change Without Notice_15.B
Spl
MP 165.3 COMP WOOFER
180 W
TECHNICAL SPECIFICATION Component
Woofer
Woofer size
mm (in.)
165 (6.5)
Voice Coil Ø
25 (1) W peak
180
W continuos
90
Impedance
Ω
4
Frequency Response
Hz
40 ÷ 5k
Magnet size D x d x h
mm (in.)
85 x 32 x 17 (3.35 x 1.26 x 0.67)
Centre to centre distance
mm (in.)
156 (6.14)
Hole diameter
mm (in.)
5 (0.2)
Weight of one speaker
kg (lb.)
1.07 (2.36)
Power Handling
Magnet
High density flux ferrite
Dome/Cone
Pressed-pulp cone with cotton fibers
*Xmech
mm (in.)
1. 2. 3. 4. 5. 6.
Pure copper voice coil wound on a Polyamide former for high power handling combined with very low intermodulation distortion of vocals. Exponential V-cone® profile pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically optimized for utmost linearity and dispersion in the mid frequency range. “Boundary Free” rubber surround, for improved efficiency and wider mid-bass frequency. High density flux ferrite magnet combined with very low carbon content iron plates, for low distortion at high power levels. Low mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo. Full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.
±7 (0.28)
*Xmech: maximum mechanical excursion it indicates the motion range in the speaker linear functioning area, in both ways.
ELECTRO-ACOUSTIC PARAMETERS D
mm
132
Xmax
mm
±4
Re
Ω
3,1
Fs
Hz
70
Le
mH
0,3
Vas
I
9,5
Mms
g
14,9
Cms
mm/N
0,36
BL
T •m
5,5
Qts
0,58
Qes
0,67
Qms
4,6 dB
93
A
165 mm
6.5 in.
B
141 mm
5.55 in.
C
74 mm
2.91 in.
D E F
63 mm 183,5 mm 29 mm
2.48 in. 7.22 in. 1.14 in.
D
B A
C
E
F
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 17
All Specifications Subject to Change Without Notice_15.B
Spl
MPCX 2 TM.3 COMP CROSSOVER
TECHNICAL SPECIFICATION Component Midrange
Low pass 5,5 kHz @ 6 dB Oct.
Tweeter
Hi pass 5,5k Hz @ 12 dB Oct.
Adjustement
Tweeter
0 / +2 dB
Size
mm (in.)
102 x 76.5 x 37 (4.02 x 3.01 x 1.46)
Weight
kg (lb.)
0,16 (0.35)
G
102 mm
4.02 in.
H
76,5 mm
3.01 in.
I
37 mm
1.46 in.
Passive crossover specifically developed for MP 70.3 and MP 25.3 when installed in a 3-way multi-amplification system and combined with an MP 165.3/ MP 165P.3 woofer actively driven. Two-position (0 / +2 dB) switch for tweeter level adjustments, to fine-tune the transducers emission. 160V extremely high quality bi-metallized polyester film capacitors with ultra-low DF, for maximum sound transparency and neat mid/hi-frequencies. 1mm pure copper wire low series resistance inductors, for low dissipation losses in the mid-range section where high transient currents are demanded. Small footprint design for easy installation, with top vent grille for efficient heat dissipation.
H
G
I
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 18
All Specifications Subject to Change Without Notice_15.B
Crossover
Crossover
1. 2. 3. 4. 5.
MPX 165.3
Optional
COAX
200 W
TECHNICAL SPECIFICATION Component
Two way coaxial
Size Woofer
mm (in.)
165 (6.5)
Tweeter diaphragm
mm (in.)
25 (1)
Woofer
mm (in.)
36 (1.42)
Tweeter
mm (in.)
20 (0.8)
W peak
200
W continuos
100
Impedance
Ω
4
Frequence Response
Hz
45 ÷ 21,5k
Crossover
Integrated
3.5 kHz @ 6dB Oct.
Woofer Magnet size Dxdxh
mm (in.)
90 x 45 x 17 (3.54 x 1.77 x 0.67)
Tweeter Magnet size Dxdxh
mm (in.)
29.5 x 22 x 4 (1.16 x 0.87 x 0.16)
Weight of one speaker
kg (lb.)
1.27 (2.8)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Pressed-pulp cone with cotton fibers
Dome
Tetolon
Xmech
mm (in.)
Voice Coil Ø
Power Handling
1. Concentric coaxial tweeter built in the woofer voice coil, achieving one single point of emission, to re-create the virtual sound-stage like in live music performances. 2. 20 mm voice coil Tetolon fiber soft dome tweeter, featuring “Center Tuning Duct” geometry, for lower resonance frequency and reduced harmonic distortion. 3. Tweeter support working as a rear chamber, sized for low Fs, to ensure a well damped high pass frequency roll-off, allowing low cut-off frequency crossover point. 4. 36 mm pure copper woofer voice coil wound on a Polyamide former, for outstanding power handling and dynamic compression-free reproduction. 5. Pressed-pulp cone with cotton fibers, combining stiffness and lightweight for a wide frequency response. Cone profile geometrically refined to perfectly match with the tweeter emission ensuring phase consistency in the crossover area. 6. “Boundary Free” rubber surround, for improved efficiency and wider mid-bass frequency. 7. Over-sized ferrite magnet combined with very low carbon content iron plates, for low distortion at high power levels. 8. Low mounting depth, acoustically transparent aluminium alloy basket with elegant diamond cutting and featuring the aluminium Hertz logo. 9. Anti-vibration rubber magnet cover, to damp spurious vibrations.
±6 (0.24)
D
mm
132
Xmax
mm
±3
Re
Ω
3,1
Fs
Hz
90
Le
mH
0,01
Vas
I
4
Mms
g
18,9
Cms
mm/N
0,15
BL
T •m
5,8
Qts
0,88
Qes
1,06
Qms Spl
5,5 dB
92 A B C D E F
165 mm 141 mm 74 mm 62,6 mm 183,5 mm 29 mm
6.5 in. 5.55 in. 2.91 in. 2.46 in. 7.22 in. 1.14 in.
D
B A
C
E
F
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 19
All Specifications Subject to Change Without Notice_15.B
ELECTRO-ACOUSTIC PARAMETERS
MPX 690.3 COAX
260 W
TECHNICAL SPECIFICATION Component
Three way coaxial
Size Woofer
(in.)
6x9
Tweeter diaphragm
mm (in.)
35 (1.4)
Supertweeter diaphragm
mm (in.)
29 (1.14)
Woofer
mm (in.)
38 (1.5)
Tweeter
mm (in.)
28 (1.1)
Supertweeter
mm (in.)
20 (0.8)
W peak
260
W continuos
130
Impedance
Ω
4
Frequence Response
Hz
30 ÷ 24k
Crossover Woofer Magnet size Dxdxh Weight of one speaker
Integrated mm (in.) kg (lb.)
4 k/10k Hz @ 6 dB Oct. 107 x 45 x 20 (4.21 x 1.77 x 0.79) 2.28 (5.03)
Woofer Magnet
High density flux ferrite
Tweeter Magnet
Neodymium
Cone
Pressed-pulp cone with cotton fibers
Dome
Tetolon
Xmech
mm (in.)
Voice Coil Ø
Power Handling
1. 38 mm pure copper woofer voice coil wound on a Polyamide former for exceptional power handling and dynamic compression-free reproduction. 2. Pressed-pulp cone with cotton fibers material, combining stiffness and lightweight for a wide frequency response. 3. Large rubber surround designed for long throw and optimal sound damping. 4. Over-sized ferrite magnet combined with very low carbon content iron plates, for low distortion at high power levels. 5. Aerodynamic thus acoustically transparent aluminium alloy basket, eliminates rear wave reflections. 6. Anti-vibration rubber magnet cover, damps spurious vibrations. 7. 28mm voice coil Neodymium Tetolon fiber dome tweeter, for undistorted mid-frequency reproduction. 8. 20mm voice coil Neodymium Tetolon fiber dome super tweeter, to naturally compensate for drop-off in frequency response due to speaker horizontal installation. 9. Tweeter faceplate with geometry optimized with FEM (Finite Element Modeling) simulations, to provide excellent off-axis frequency response up to 24kHz by perfectly mixing the two tweeters’ emission. 10. Full protection metal mesh grill featuring the aluminium Hertz logo and attractive look mineral powder coated inner grill are included for several install combinations.
±8 (0.31)
D
mm
169
Xmax
mm
±4
Re
Ω
3
Fs
Hz
50
Le
mH
0,07
Vas
I
24
Mms
g
30
Cms
mm/N
0,34
BL
T •m
7,2
Qts
0,43
Qes
0,55
Qms Spl
2 dB
94 A B C D E F
241 mm 223 mm 108 mm 90 mm 267 mm 38,5 mm
9.49 in. 8.74 in. 4.25 in. 3.54 in. 10.53 in. 1.52 in.
D
C E
B A
F
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 20
All Specifications Subject to Change Without Notice_15.B
ELECTRO-ACOUSTIC PARAMETERS
ABOUT US Elettromedia, an Italian company, is a leader within the world-wide car Hi-Fi market. Born in 1987 in Potenza Picena by a group of friends who shared the same passion for in-car high fidelity, throughout the past years Elettromedia has been walking the path of excellence: its products are distributed in more than 50 countries; the company has received many awards and acknowledgements from the most authoritative leaders within the car audio industry; it also can boast reviews of more than 3000 pages published in 30 different languages (visit: www.elettromedia.it/press_area.asp). The Elettromedia brands are Audison, Hertz, Connection and AZaudiocomp. Through a co-branding strategy, the company offers all of the components required for a complete, top-level car audio system. Contacts: Elettromedia s.r.l. Strada Regina km 3,500 - 62018 Potenza Picena (Mc) - Italy T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it
All Specifications Subject to Change Without Notice_15.B
AWARDS
21
Press Kit
(www.elettromedia.eu, area Press Room) Mille Product Information (PDF version, 150 dpi resolution) Mille Technical Data Sheets (PDF version, 150 dpi resolution) Logos: Hertz, Mille, V-cone®, Boundary Free sorround, eID (Adobe Illustrator version, 300 dpi resolution)
MP 25.3
MP 70.3
MP 165P.3
MP 165.3
MPCX 2.3
MPX 165.3
MPX 690.3
MPK 165.3
MPK 165P.3
MPK 163.3
MPK 130.3
Elettromedia - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it 22
All Specifications Subject to Change Without Notice_15.B
Photos (JPG version, 300 dpi resolution)
All Specifications Subject to Change Without Notice
PART OF ELETTROMEDIA - 62018 Potenza Picena (MC) Italy - T +39 0733 870 870 - F +39 0733 870 880 - www.elettromedia.it
