Product Information - Challenge Electronics

Transcript

Challenge Electronics Tel: 1-800-722-8197 95 East Jefryn Boulevard Deer Park, NY 11729 EMAIL: [email protected] WEB: www.challengeelectronics.com 1-631-595-2217 Fax: 1-631-667-5484 ISO 9001:2008 Certified PRODUCT INFORMATION CES400V058BF08PCN650UR PART # Revision: 0-2017 OVAL SPEAKER Lead Free RoHS COMPLIANCE DESCRIPTION: Challenge Electronics Speaker; 40.0 mm Diameter; oVal shape; 5.8 mm High; BF = 1.5 W maximum power; 8 Ohm; Plastic Frame; Cloth Cone; NdFeB magnet; 650 Hz. (Fo) Resonant Frequency; Solder Point Termination; RoHS Lead Free Compliant SPECIFICATIONS Oval Shape 8Ω ±15% /1KHz/1V Impedance DC Resistance 1.0 W Rated Power Sine Wave Maximum Power White Noise 1.5 W 650 ±20% Hz/1V Resonant Frequency (Fo) Effective Frequency Band 200HZ ~ 20KHz 90 ±3 dB at (AVG 0.8, 1.0, 1.2, 1.5) kHz 0.1M/0.1W Sound Pressure Level -40º C to +85º C -40º C to +85º C Operating Temperature Storage Temperature Length (L) 40.0 mm Width (W) 20.0 mm 5.8 mm Physical Dimensions Height (H) 3 mm Baffle Opening Minimum Opening Recessed 4 holes, Ø 2.1 mm Mounting Less than 5% at 1 kHz. at 1.0 V Distortion Not be audible at 4 V sine wave between 200 Hz and 20 kHz. Buzz & Rattle When a positive DC Current is applied to the voice coil terminal marked +or red, the diaphragm shall move Polarity forward. T Magnet NdFeB φ11×1.5t mm Flux Density Cloth Frame ABS Plastic Cone Material Material Termination Solder Point Gasket Speaker Parameters Qms Approximate Weight Options Qes 7.6 grams Qts Shielding Vas No Cms Compliance M M/N BL Lead Free, RoHS, REACH RELIABILITY Maximum Power Test Thermal Operating Temperature Test Thermal Storage Temperature Test Thermal Shock Test Humidity Test Operation Life Test Insulation Test Vibration Test Termination Strength Drop Test * With program White-Noise source Maximum Power, 1 minute on, 2 minutes off, 10 cycles, per (EIA) * 96 hours continuous operation at Rated Power, at Maximum Rated Operating Temperature * 96 hours continuous operation at Rated Power, at Minimum Rated Operating Temperature * 96 hours storage at Maximum Rated Storage Temperatures * 96 hours storage at Minimum Rated Storage Temperatures * 5 cycles of Minimum and Maximum Operating Temperature Each cycle shell be set per diagram below and is three (3) hours long * 96 Hours at +40°C±2°C. 90-95% RH * Must perform normal with program White-Noise source at Rated Power for 96 Hours per (EIA) * A minimum of 1 MΩ, measured with 100 Vdc Insulation Resistance Meter, between the Electrical Terminals and the Transducer Case Parts in Shipping Container are subjected to 15minutes of at 0.75 mm with 10 to 55 Hz. vibration frequency to each of 3 perpendicular directions * Maximum of 9.8 N (1.0 Kg) load pull test, applied to each terminal in axial direction for 10 seconds Parts in Shipping Container are subjected to dropped naturally from 1 meter height onto the surface of 40 mm wooden board, 3 axes (X,Y,Z) directions, 3 times (9 times total) * Parts should conform to original performance within ±5 dB tested with Rated Power, after 3 hours of recovery period. For a period of one (1) year from date of shipping under normal operations conditions This warranty does not apply to products damaged through misuse, abuse, improper installation, alteration, rework, or attempt to repair Reliability Test Performance Warranty The information contained herein is believed to be correct, but no guarantee or warranty, express or implied, with respect to accuracy, completeness or results is extended and no liability is assumed. Challenge Electronics reserves the right to make changes in any specification, data or material contained herein. 1 of 3 CE-EG-04.400S, Speakers Specifications Copyright © 2017 Challenge Electronics 1/26/2017 Challenge Electronics Tel: 1-800-722-8197 95 East Jefryn Boulevard Deer Park, NY 11729 EMAIL: [email protected] WEB: www.challengeelectronics.com 1-631-595-2217 Fax: 1-631-667-5484 DIMENSIONS Units in: mm, Tolerance: ± 0.3mm unless specified otherwise ISO 9001:2008 Certified ASSEMBLY & MATERIALS 8 PCB 1 EPOXY 7 Plate 1 0.8t 6 Magnet 1 NdFeB 5 Voice coil 1 CU 4 Dust cap 1 PAPER 3 Yoke 1 1.0T 2 Cloth cone 1 Cloth 1 Frame 1 ABS # NAME Q’TY MATERIAL SPL vs. FREQUENCY RESPONSE MOUNTING PRECAUTION The speaker must be mounted so that the diaphragm can move freely without mechanical interference from the baffle, enclosure or other parts. The required clearance (if specified) will be given in the mechanical drawing and/or detailed specifications above. TEST PROCESS Speaker Standard test condition of speaker Microphone B&K Type 4191 Power Amplifier X Standard Test Fixture Test Condition STANDARD Temperature: 15 ~ 35ºC Relative humidity: 45% ~ 85% Atmospheric pressure: 860 mbar to 1060 mbar JUDGEMENT Standard Baffle Board Recommended In IEC 268-5 Where 1650mmx1350mm Audio Analyzer B&K Type 2012 SUBSTANCE OF VERY HIGH CONCERN (SVHC) Temperature : Relative humidity: Atmospheric pressure: 20±3ºC 60% ~ 70% 860 mbar to 1060 mbar Zero Level: Mode: potentiometer Range: Sweep Time: -dB TSR 50 dB 0.5 sec Input Power: 0.1 W Microphone Distance: X = 10 cm This product does NOT contain any of the REACH Substances of Very High Concern (SVHC), and is in compliance with European Union REACH Regulation No.1907/2006 regarding chemical substances which must be registered or disclosed. The information contained herein is believed to be correct, but no guarantee or warranty, express or implied, with respect to accuracy, completeness or results is extended and no liability is assumed. Challenge Electronics reserves the right to make changes in any specification, data or material contained herein. 2 of 3 CE-EG-04.400S, Speakers Specifications Copyright © 2017 Challenge Electronics 1/26/2017 Challenge Electronics Tel: 1-800-722-8197 95 East Jefryn Boulevard Deer Park, NY 11729 1-631-595-2217 Fax: 1-631-667-5484 EMAIL: [email protected] WEB: www.challengeelectronics.com ISO 9001:2008 Certified PACKAGING MARKING Bundle Part Number Other PN if required Quantity Lot and/or Date Code Bundle Number Shipping Box Part Number Other PN (if required) Quantity Lot and/or Date Code PO Number Net Weight Gross Weight Box Number of Boxes Made in China Revision Description The information contained herein is believed to be correct, but no guarantee or warranty, express or implied, with respect to accuracy, completeness or results is extended and no liability is assumed. Challenge Electronics reserves the right to make changes in any specification, data or material contained herein. 3 of 3 CE-EG-04.400S, Speakers Specifications Dimensions TRAY X1 Y1 Z1 cm cm cm BUNDLE X2 Y2 Z2 cm cm cm Quantity Dimensions Quantity SHIPPING BOX X3 cm Y3 cm Dimensions Z3 cm Number of Bundles Quantity Approximate Weight By Date Copyright © 2017 Challenge Electronics 1/26/2017