Transcript
Product Information DaisyNET II DaisyNET II: The new 4K Generation of a cascadable multiformat extender DaisyNET II is a cascadable multiformat extender with many new, top-notch features. In addition to switching and distributing AV signals, DaisyNET II can now also perform control tasks – and all of it with just one device!
This professional and yet cost-effective solution enables you to implement even large and demanding projects in a very simple way: Just configure each transceiver via its web interface, cascade the units with a CAT cable, connect your sources and displays, and you´re done.
Features of DaisyNET II: Transceiver (TRX): Transmitter and receiver in one device » unparalled flexibility with one single device Inputs: HDBaseT, HDMI 2.0, Display Port 1.4 and VGA + audio » The most important AV interfaces and technologies are supported, providing a future-proof solution Outputs: HDBaseT, HDMI and analog stereo out » No separate audio de-embedder required Flexible EDID-Management » Ensures that the source always sends the optimal signal resolution to the sink USB charging port » Fast charging for smartphones and tables with up to 1500mA Bus or ring topology: In a ring-type connection a source can be displayed on the HDMI outputs of all other TRX in the same ring » ideal for training rooms Coverage: 100 meters between each device » Very easy implementation of large scale installations Group mode » Large conference rooms installations can be divided logically into different groups for independent signal transmission Source switching: via contact closures, integrated ShowME button, auto switching or via Telnet from a separate control system » unique flexibility Sink control: DaisyNET II can turn your display / projector automatically on and off by CEC or RS232 » replaces a small media control system Network: one Ethernet port each at the front and rear » flexible integration Single cable solution for the conference room: Interconnection between tables with only one CAT cable for Video, Audio, Ethernet and command protocols Web Interface: configure a transceiver with a simple web browser » Quick installation, no separate software necessary
Type: Cat. No.:
DaisyNET II TRX 7092DNTRX
DaisyNET II Transceiver integrates perfectly into Bachmann facility systems. Änderungen vorbehalten / Subject to change
COMM-TEC GMBH
COMM-TEC / TRE / 23.12.2016
SIEMENSSTRASSE 14 D-73066 UHINGEN
TEL: +49 7161-3000-0 FAX: +49 7161-3000-400
WWW.COMM-TEC.DE
Product Information DaisyNET II Application 1: Chain-type Connection Unit 1 and 2 works as a Transmitter, Unit M and Z works as a Receiver. Both displays show the source which is switched on the HDBaseT bus.
Application 2: Chain-type Connection with local monitor Each Transceiver works as Transmitter and Receiver. The local monitor shows the signal which is switched on the HDBaseT bus. But the video signal cannot be transmitted backwards, so only the active and the following Transceivers will show the selected source. >> To avoid this, use the Ring-type Connection (see Application 3)
Application 3: Ring-type Connection with local monitor Each Transceiver works as Transmitter and Receiver. All local monitors show the source which is switched on the HDBaseT bus. To setup a Ring-type Connection, connect the HDBaseT output of the last unit with the HDBaseT input of the first unit
Application 4: Grouping With the grouping mode you can operate a dividable conference room as stand-alone rooms or as one big room - When the grouping mode is enabled, each source signal will stay in the corresponding room - When the grouping mode is disabled, the source from room 1 will be transmitted also to room 2. The grouping mode can be enabled/disabled by the Web Interface or by a Telnet command. Änderungen vorbehalten / Subject to change
COMM-TEC GMBH
COMM-TEC / TRE / 23.12.2016
SIEMENSSTRASSE 14 D-73066 UHINGEN
TEL: +49 7161-3000-0 FAX: +49 7161-3000-400
WWW.COMM-TEC.DE
