Product Information Heritage A100 Integrated

Transcript

PRODUCT INFORMATION HERITAGE A100 INTEGRATED AMPLIFIER The A100 from YBA shows a great maturity and will combine with ease with many types of source products and loudspeakers. as its power seems without limits. Its flexibility is equal only to that of its musicality and it becomes an essential choice for all those who seek above all, an amplifier combining refinement sound and speed. All products in the Heritage range utilise the same stylish chassis in brushed aluminium that can be obtained in two different finishes, silver or black. The chassis rests on three feet, two of which are damped, the third in aluminium ends in a metal ball serving as the vanishing point of the vibrations. The power on/off switch is located on the underside of the chassis towards the front of the left hand side. Two buttons feature on the front panel, one for source selection and one for volume and centred between them is an oval-shaped display with yellow lettering indicating the connected source and the volume reached. A beautiful remote control will allow you to access the functions from a distance. The A100 has 5 sets of RCA inputs and 1 balanced. The video input has a by-pass feature (by-passing the preamplifier section). It also has a pre-out should you wish to use a separate power amplifier, a pair of powered speakers or to connect a subwoofer. It has one pair of speaker outputs. Audio outputs Power output SNR Frequency response THD+N Inputs Power Supply Dimensions Finish Weight 1 pair of speaker outputs, 1 pre-out (RCA) 100W @ 8 Ω per channel 150W @ 4 Ω per channel > 95dB 20Hz-20kHz (-0.5dB) < 0.04% 5 RCA, 1 balanced Linear power supply with high performance transformer 320 VA 430mm X 400mm X 118mm Silver or Black 9.2 kg