Transcript
Product information 12. 2012
Pick it MC-1 & Pick it MC-1H
Technical data:
MC-1
MC-1H
4,1g
Phono cartridge for turntables Weight:
4,1g
Moving Coil principle
Stylus type:
Elliptical
Elliptical
•
More dynamic playback than MM cartridges
Stylus tip radus:
8 x 18 µm
8 x 18 µm
Frequency response:
20 - 22000 Hz
20 - 22.000 Hz
•
High trackability
Output voltage:
0,5 mV
2,3 mV
•
MC-1 suits nearly all preamplifiers/step-up transformers
Channel separation:
>23dB
>23dB
•
MC-1H connects directly to MM phono preamp
Compliance:
12/12 µm/mN
13/13 µm/mN
Tracking force:
2,2 - 2,7g
1,8-2,2 g
•
Suitable for light to medium tonearm mass
Recommended tracking force:
2,5g
2,0 g
•
1/2-inch mount
Tracking ability (315 Hz, lateral): >70 µm
>70 µm
Vertical tracking angle
20°
•
•
As with all MC cartridges, stylus can not be exchanged
20°
Coil impedance:
10 Ω
100 Ω
Recommended load resistance:
> 10 Ω
47 kΩ
Pick it MC-1 SRP
159,00 € Pick it MC-1H SRP
199,00 €
Low cost upgrade for audiophile vinyl experience! The selection of a phonographic cartridge is very important for the quality level of your turntables sound reproduction. MC (Moving Coil) cartridges offer far better sound reproduction levels than conventional MM (Moving Magnet) can do. Pick-it MC-1 needs a special MC-preamplifier, in contrast Pick it MC-1H is a high-output cartridge, that can be connected directly to MM inputs, offering fine, natural and lively sound reproduction of MC without the need of an additional amplifier stage. Everyone who seeks for the fast, dynamic high-grade playback quality of Moving Coil (MC) cartridges and wants to upgrade an existing cartridge, will be fascinated by the excellent price-to-performance ratio of Pick it cartridges.
PRO-JECT AUDIO SYSTEMS a division of AUDIO TUNING GmbH 1050 Wien, Margaretenstraße 98, Telefon: +43 1 5448580
Update: JK / DZ
Datum 23.04.2013
