Transcript
Product Line
Represented by:
How to read our BDA (or One Way) part number
Type of equipment RBDA- 19” Rack BDA FOBDA – Fiber Optic BDA RFOBDA – Fiber in 19” rack BDA GXXX – One Way Booster
X XXX–SMR–1/1W-80-A XXX
Options Code
Gain (dB) Enclosure
Band Type (See Frequency Band Chart for our codes)
Downlink Power (in Watts) @ 1 db compression
Uplink Power (in Watts) @ 1 db compression Code UHF* ( see Note) CDMA450 ** (see Note) PS7 SMR SMR/N (New SMR) PS8/N ( New PS8) ESMR800 or PS8 NPSPAC ( PSS) NPSPAC/N ( New PSS) CELLA CELLB CELLAB SMR900 GSML GSMH GSMF 2PGN DCS/D DCS/C DCS/!E PCS/!A PCS/D PCS/B PCS/!E PCS/F PCS/C PCS/!AD PCS/ADB PCS/EF PCS/FC PCSF UMTS
Uplink 380-512 MHz 410-495 MHz 793-805 MHz 806-821 MHz 817-824 MHz 806-816 MHz 806-824 MHz 821-824 MHz 806-809 MHz 824-835 MHZ 835-849 MHZ 824-849 MHZ 896-902 MHZ 890-902 MHZ 902-915 MHZ 890-915 MHZ 900-903 MHZ 1710-1725 MHz 1725-1740 MHz 1740-1755 MHz 1850-1865 MHz 1865-1870 MHz 1870-1885 MHz 1885-1890 MHz 1890-1895 MHz 1895-1910 MHz 1850-1870 MHz 1850-1885 MHz 1885-1895 MHz 1890-1910 MHz 1850-1910 MHz 1920-1980 MHz
Downlink 380-512 MHz 410-595 MHz 763-775 MHz 851-866 MHz 862-869 MHz 851-861 MHz 851-869 MHz 866-869 MHz 851-854 MHz 869-880 MHz 880-894 MHz 869-894 MHz 935-941 MHz 935-947 MHz 947-960 MHz 935-960 MHz 929-942 MHz 1805-1820 MHz 1820-1835 MHz 1835-1850 MHz 1930-1945 MHz 1945-1950 MHz 1950-1965 MHz 1965-1970 MHz 1970-1975 MHz 1975-1990 MHz 1930-1950 MHz 1930-1965 MHz 1965-1975 MHz 1970-1990 MHz 1930-1990 MHz 2110-2170 MHz
*Our Standard UHF is 2 MHz bands and 3 MHz separation “Corner to Corner” ** Standard CDMA 450 is 5 MHz bands and 5 MHz separation “Corner to Corner”.
3
AB A B N89 E P O OL
Dual band SMR Extender Portable Outdoor Outdoor
BDA-XXXX-0.5/0.5W-70-A
INDOOR MINI BDA’s for CELLULAR Bands OR PCS / DCS with 0.5W Uplink and 0.5W Downlink (@ 1 dB), and 70dB Gain. Units feature extremely low Noise Figure and a wide dynamic ALC range. The design is based on a duplexed path configuration with sharp out of band attenuation allowing an improved isolation between the receiving and transmitting paths. This type of systems is the most economical solution for several story buildings with weak signal strength outside the covered structure.
Frequency Band
Uplink
Downlink
1
Per Spec Per Spec Any Cellular Any Public Safety See page 9 Any PCS or DCS* Per Spec Per Spec or UMTS/AWS Per Spec Per Spec *NON Contiguous See Page 12 Any Dual Band * Up to 4 non contiguous blocks in PCS are available. call for spec and quote. Options: • •
Visual Alarm Visual Alarm + Remote Monitoring Via 9 Pin Connector
GAIN (Minimum attenuation) [dB] GAIN Flatness [dB] Noise Figure [dB] Manual Attenuation Range (Continuous) Power Output @ 1 dB Compression [dBm] Output Power ALC Set [dBm] Output Composite Power [dBm] rd
3 Order Output Intercept Point [dBm] @ 2 Tones + 14 dBm each rd 3 Order Output Intercept Point [dBm] @ 2 Tones + 14 dBm each Power Supply ( External) Input/Output Impedance VSW R IN/OU T
70 +/- 1.5 (Max.) 3.5 Max- 3 (Typ.) 0 to 30 in 2 dB steps. UPLINK DOWNLINK UPLINK DOWNLINK UPLINK DOWNLINK UPLINK DOWNLINK
+26 (Typ.) +26 (Typ.) + 20 +/- 1 + 20 +/- 1 +20 (Typ.) +20 (Typ) +39 +39 15 Volt DC 50 ohm < 1.5: 1 < 0.25
Propagation Delay [µSec.]
4
BDA-XXX-1/1W-80-AB
INDOOR BDA’s for CELLULAR, Public Safety PCS / DCS or UMTS/AWS with 1 or 2W Uplink and 1W or 2W Downlink (@ 1 dB), and 80dB Gain. Units feature extremely low Noise Figure and a wide ALC dynamic range. The design is based on a duplexed path configuration with sharp out of band attenuation allowing an improved isolation between the receiving and transmitting paths. This type of systems is the most economical solution for several story buildings with weak signal strength outside the covered structure. All Systems include Visual Alarm and for a nominal fee we can accommodate Remote Monitoring (via 9 Pin Connector and pigtail).
Frequency Band
Uplink
Downlink
SMR or ESMR800 or SMR900 Any Public Safety* Any Cellular Any GSM Any PCS/DCS/UMTS/AWS Dual Band SMR800/900 Dual Band CELL/PCS
Per Spec
Per Spec
SEE Page 9 Per Spec Per Spec Per Spec Per Spec
Per Spec Per Spec Per Spec Per Spec
Dual Band Public Safety
SEE Page 9
*NON Contiguous PCS/DCS
Per Spec
1
SEE Page 12 Per Spec
* Up to 4 non contiguous blocks in PCS are available. call for spec and quote. Options: • 2W uplink or 2W downlink • External filter capability • Remote Monitoring Option • 90+ dB gain GAIN (Minimum attenuation) [dB] GAIN Flatness [dB] Noise Figure [dB] Manual Attenuation Range (Continuous) Power Output @ 1 dB Compression [dBm] Output Power ALC Set [dBm] Output Composite Power [dBm] rd 3 Order Output Intercept Point [dBm] @ 2 Tones + 20 dBm each Power Supply
80 +/- 1.5 (Max.) 4.5 (Max), 4 (Typ.) 0 to 30 in 2 dB steps. +32 (Min.) + 25 +/- 1 +25 (Typ.) +45 110 to 220 VAC (Autoranging) 50 to 60 Hz 50 ohm <1.5:1 < 0.25
Input/Output Impedance VSWR IN/OUT
Propagation Delay [µSec.]
5
BDA-XXX-1/10W-80-A B
INDOOR BDA’s for CELLULAR, Public Safety, & PCS / DCS with 1 or 2W Uplink and 10W Downlink (@ 1 dB), and 80dB Gain. Units feature extremely low Noise Figure and a wide dynamic ALC range. The design is based on a duplexed path configuration with sharp out of band attenuation allowing an improved isolation between the receiving and transmitting paths. This type of systems is the most economical solution for several story buildings with weak signal strength outside the covered structure. All Systems include Visual Alarm and for a nominal fee we can accommodate Remote Monitoring (via 9 Pin Connector and pigtail).
Frequency Band
Uplink
Downlink
1
Per Spec SMR or ESMR800 or SMR900 Per Spec Any Public Safety* SEE Page 9 Per Spec Per Spec Any Cellular Per Spec Per Spec Any GSM Per Spec Per Spec Any PCS/DCS/UMTS/AWS Per Spec Per Spec Dual Band SMR800/900 SEE Page 12 Dual Band CELL/PCS Dual Band Public Safety SEE Page 9 *NON Contiguous PCS/DCS Per Spec Per Spec * Up to 4 non contiguous blocks in PCS are available. call for spec and quote. Options: • 2W uplink /10W downlink • External filter capability • Remote Monitoring Option • 90+ dB gain GAIN (Minimum attenuation) [dB] GAIN Flatness [dB] Noise Figure [dB] Manual Attenuation Range (Continuous) Power Output @ 1 dB Compression [dBm] Output Power ALC Set [dBm] Output Composite Power [dBm] rd
3 Order Output Intercept Point [dBm] @ 2 Tones + 20 dBm each rd 3 Order Output Intercept Point [dBm] @ 2 Tones + 27 dBm each Power Supply
UPLINK DOWNLINK UPLINK DOWNLINK UPLINK DOWNLINK UPLINK DOWNLINK
80 +/- 1.5 (Max.) 4.5 (Typ.) 0 to 30 in 2 dB steps. +32 (Typ.) +40 (Typ.) + 25 +/- 1 + 33 +/- 1 +25 (Typ.) +33 (Typ) +45 +50 110 to 220 VAC (Autoranging) 50 to 60 Hz 50 ohm <1.5:1 < 0.25
Input/Output Impedance VSWR IN/OUT
Propagation Delay [µSec.]
6
BDA-XXXX-1/25W-90-O
OUTDOOR BDA’s for CELLULAR, Public Safety, & PCS/DCS/UMTS/AWS with bands with 1 or 2W uplink and 25W downlink (@ 1 dB), and 90dB gain. The units are built in NEMA 4 enclosures, to withstand the outside environment. All units come with standard AC line Surge protection and local visual alarm indicators. All outdoor Repeaters can be equipped with an optional Uninterruptible Power Supplies (UPS).
Frequency Band
Uplink
Downlink
SMR or ESMR or SMR900
Per Spec
Per Spec
Public Safety
CALL FOR SPEC & QUOTE
ANY CELL
Per Spec
Per Spec
ANY GSM ANY PCS/ DCS/UMTA/AWS DUAL BAND SMR 800/900 *Non Contiguous CELL ( A+A’ or B+B’) *Non Contiguous DCS or PCS or UMTA /AWS
Per Spec
Per Spec
Per Spec
Per Spec
Per Spec
Per Spec
Per Spec
Per Spec
Per Spec
Per Spec
1
* Up to 4 non contiguous blocks in PCS are available. call for spec and quote. Options: • 2W uplink /25W downlink • Remote monitoring 7 pin connector and Pigtail • External 28 VDC for Battery backup • Complete UPS GAIN (Minimum attenuation) [dB] GAIN Flatness [dB] Noise Figure [dB] Manual Attenuation Range (Continuous) Power Output @ 1 dB Compression [dBm] Output Power ALC Set [dBm] Output Composite Power [dBm] rd
3 Order Output Intercept Point [dBm] @ 2 Tones + 20 dBm each rd 3 Order Output Intercept Point [dBm] @ 2 Tones + 30 dBm each Power Supply
UPLINK DOWNLINK UPLINK DOWNLINK UPLINK DOWNLINK UPLINK DOWNLINK
90 +/- 1.5 (Max.) 4 (Typ.) 0 to 30 in 2 dB steps. 1/25W 2/25W +32 (Typ.) +34 (Typ.) +44 (Typ.) +44 (Typ.) + 25 +/- 1 + 27 +/- 1 +37 +/- 1 + 37 +/- 1 +25 (Typ.) +27 (Typ.) +37 (Typ) +37 (Typ.) +45 +47 +55
+55
110 to 220 VAC (Autoranging) 50 to 60 Hz 50 ohm <1.5:1 < 0.25
Input/Output Impedance VSWR IN/OUT
Propagation Delay [µSec.]
7
BDA-XXXX-1/50W-90-LO
OUTDOOR BDA’s for CELLULAR, Public Safety, & PCS/DCS/UMTS/AWS with bands with 1 or 2W uplink and 25W downlink (@ 1 dB), and 90dB gain. The units are built in NEMA 4 enclosures, to withstand the outside environment. All units come with standard AC line Surge protection and local visual alarm indicators. All outdoor Repeaters can be equipped with an optional Uninterruptible Power Supplies (UPS).
Frequency Band
Uplink
Downlink
SMR or ESMR or SMR900
Per Spec
Per Spec
Public Safety
CALL FOR SPEC & QUOTE
ANY CELL
Per Spec
Per Spec
ANY GSM ANY PCS/ DCS/UMTA/AWS DUAL BAND SMR 800/900 *Non Contiguous CELL ( A+A’ or B+B’) *Non Contiguous DCS or PCS or UMTA /AWS
Per Spec
Per Spec
Per Spec
Per Spec
Per Spec
Per Spec
Per Spec
Per Spec
Per Spec
Per Spec
1
* Up to 4 non contiguous blocks in PCS are available. call for spec and quote. Options: • 2W uplink /25W downlink • Remote monitoring 7 pin connector and Pigtail • External 28 VDC for Battery backup • Complete UPS GAIN (Minimum attenuation) [dB] GAIN Flatness [dB] Noise Figure [dB] Manual Attenuation Range (Continuous) Power Output @ 1 dB Compression [dBm] Output Power ALC Set [dBm] Output Composite Power [dBm] rd
3 Order Output Intercept Point [dBm] @ 2 Tones + 20 dBm each rd 3 Order Output Intercept Point [dBm] @ 2 Tones + 36 dBm each Power Supply Input/Output Impedance VSWR IN/OUT
Propagation Delay [µSec.]
90 +/- 1.5 (Max.) 4 (Typ.) 0 to 30 in 2 dB steps. 1/50W 2/50W UPLINK +32 (Typ.) +34 (Typ.) DOWNLIN +47 (Typ.) +47 (Typ.) UPLINK + 25 +/- 1 + 27 +/- 1 DOWNLIN + 40 +/- 1 + 40 +/- 1 UPLINK +25 (Typ.) +27 (Typ.) DOWNLIN +40 (Typ) +40 (Typ) +45 +47 UPLINK +59 +59 DOWNLIN 110V to 220V (Autoranging) 50 to 60 Hz 50 ohm <1.5:1 < 0.25
8
PUBLIC SAFETY
Single and Dual Bands Public Safety:
INDOOR BDA’s for Public Safety, Units feature extremely low noise figure and a wide dynamic range. The design is based on a duplexed path configuration with sharp out of band attenuation allowing an improved isolation between the receiving and transmitting paths. This type of systems is the most economical solution for several story buildings with weak signal strength outside the covered structure. All Systems include Visual Alarm and for a nominal fee we can accommodate Remote Monitoring (via 9 Pin Connector and pigtail). Please call for additional monitoring options.
We can offer OUTDOOR BDA’s for Public Safety – please contact us for details. Frequency Band
Uplink
Downlink
PS 700
793-805
763-775
MINI
1W
10W
PS 800 806-824 851-869 PS 900 896-902 935-941 NPSPAC 821-824 866-869 NPSPAC/N 806-809 851-854 PS 800 NEW 806-816 851-861 Dual Band 700/800 793-824 763-775 / 851-869 Dual Band 800/900 806-824 / 896-902 851-869 / 935-941 Re-Bandable Single Band “Old to New” “Old to New” Re-Bandable Dual Band “Old to New” “Old to New” Options MINI: • Visual Alarm • Visual Alarm + Remote Monitoring Via 9 Pin Connector Options 1W : • 2W uplink or 2W downlink • Remote monitoring 9 pin connector and Pigtail Options 10W : • 2W uplink /10W downlink • Remote monitoring 9 pin connector and Pigtail
Note- The local re-bandable option will allow with a flip of a switch to “shift” from old frequencies to
MINI
the new ones.
1W
XXX-0.5/0.5W-70-A XXX-1/1W-80-AB
10W
XXX-1/10W-80-AB
GAIN (Minimum attenuation) [dB]
70
80
80
GAIN Flatness [dB] Noise Figure [dB] Manual Attenuation Range (Continuous)
+/- 1.5 (Max.) 3.5 Max- 3 (Typ.) 0 to 30 in 2 dB steps.
+/- 1.5 (Max.) 4.5 (Max), 4 (Typ.) 0 to 30 in 2 dB steps.
+/- 1.5 (Max.) 4.5 (Typ.) 0 to 30 in 2 dB steps.
+26 (Typ.) +26 (Typ.) + 20 +/- 1 + 20 +/- 1 +20 (Typ.) +20 (Typ) +39
+32 (Min.) +32 (Min.) + 25 +/- 1 + 25 +/- 1 +25 (Typ.) +25 (Typ.) +45
+32 (Typ.) +40 (Typ.) + 25 +/- 1 + 33 +/- 1 +25 (Typ.) +33 (Typ) +45
+39
+45
+50
110 to 220 VAC (Autoranging) 50 to 60 Hz ( External) 50 ohm <1. 5:1 < 0.25
110 to 220 VAC (Autoranging) 50 to 60 Hz 50 ohm <1.5:1 < 0.25
110 to 220 VAC (Autoranging) 50 to 60 Hz 50 ohm <1.5:1 < 0.25
Power Output @ 1 dB Compression [dBm] Output Power ALC Set [dBm] Output Composite Power [dBm] rd
3 Order Output Intercept Point [dBm] @ 2 Tones + 14 dBm each rd 3 Order Output Intercept Point [dBm] @ 2 Tones + 14 dBm each Power Supply ( External) Input/Output Impedance VS WR IN / OU T
Propagation Delay [µSec.]
UPLINK DOWNLINK UPLINK DOWNLINK UPLINK DOWNLINK UPLINK DOWNLINK
9
BDA-UHF or CDMA450-4/4W-70-A and BDA-UHF or CDMA450-4/4W-55-AB
UHF or CDMA450 BDA’s with 4W uplink and 4W downlink (@1dB) , and 70dB or 55dB gain. The design is based on a Duplex path configuration with sharp out of band attenuation allowing improved isolation between the TX and RX paths covering any UHF 2 MHz BW and CDMA450 5MHz BW (between 380-512 MHz) maintaining a 3 MHz ( UHF) or 5MHz (CDMA450) separation “Corner to Corner”. The unit uses a Wall Mount or a NEMA 4 enclosures that can be used indoor and outdoor. We can offer Remote Monitoring Via 7 Pin or 9 Pin Connectors and pigtail.
Frequency Band UHF/ CDMA 450 55 dB gain UHF/ CDMA 450 70 dB gain UHF BW: 3MHz (see note) CDMA BW: 5MHz (see note)
Uplink
Downlink
380-512
380-512
380-512
380-512
UHF= 2 MHz CDMA= 5 MHz
UHF= 2 MHz CDMA= 5 MHz
1
** Visual Alarm Option Note – We can offer the BDA’s in 19” Racks – please contact for Price. Options: • NOTE: Standard Separation for UHF and CDMA 450 are defined as “Corner to Corner”. Should you require special non standard separation please contact us for pricing and availability. • Visual Alarm option ; 55 dB gain system • Remote Monitoring Option (with Visual Alarm option) GAIN (Minimum attenuation) [dB] GAIN Flatness [dB] Noise Figure [dB] Manual Attenuation Range (Continuous) Power Output @ 1 dB Compression [dBm] Output Power ALC Set [dBm] Output Composite Power [dBm] rd
3 Order Output Intercept Point [dBm] @ 2 Tones + 27 dBm each rd 3 Order Output Intercept Point [dBm] @ 2 Tones + 27 dBm each Power Supply
UPLINK DOWNLINK UPLINK DOWNLINK UPLINK DOWNLINK UPLINK DOWNLINK
55 or 70 +/- 1.5 (Max.) 4.5 (Typ.) 0 to 30 in 2 dB steps. +39 (Typ.) +39 (Typ.) + 31 +/- 1 + 31 +/- 1 +31 (Typ.) +31 (Typ) +51 +51 110 to 220 VAC (Autoranging) 50 to 60 Hz 50 ohm <1.5:1 < 0.3
Input/Output Impedance VSWR IN/OUT
Propagation Delay [µSec.]
10
LINE EXTENDER -BDA-XXXX-0.15/0.15W-35-E or DOWNLINK BOOSTERS
LINE EXTENDER/BDA’s for CELL or PCS with 0.15W Uplink and 0.15W Downlink (@ 1 dB), and 35dB Gain. In-Line Bi-Directional Amplifiers (Extenders) were designed as Bi-Directional Line Amplifiers for use in Distributed Antenna Systems (DAS) to compensate for cable loss on long cable runs. Extenders are used as indoor repeaters with external AC/DC converters or as In-Line amplifiers when DC power is injected through the BTS port. Additionally, Downlink Boosters offer typical 35dB additional gain when placed as front end of the Repeater with minimal Uplink loss. Perfect solution for High Gain (Low signal) environments!
Frequency Band
Uplink
Downlink
SMR GSM L GSM H Cellular AB* PCS AD PCS BE PCS AD PCSF ( full band) Dual Band Dual Band 700/800 Dual Band 800/900
806-821 MHz 890-902 MHz 902-915 MHz 824-849 MHz 1850-1870 MHz 1870-1890 MHz 1890-1910 MHz 1850-1910 MHz CELL/PCS
851-866 MHz 935-947 MHz 947-960 MHz 869-894 MHz 1930-1950 MHz 1950-1970 MHz 1970-1990 MHz 1930-1990 MHz CELL/PCS
793-824 MHz 806-824/896-902 MHz
GAIN (Minimum attenuation) [dB] GAIN Flatness [dB] Noise Figure [dB] Manual Attenuation Range (Continuous) Power Output @ 1 dB Compression [dBm] Output Composite Power [dBm] 3rd Order Output Intercept Point [dBm] Power Supply Input/Output Impedance VSWR IN/OUT
763-775/851-869 MHz 851-869/935-941 MHz
35 +/- 1.5 (Max.) 4(Typ.) 0 to 30 in 2dB steps +21 (Typ.) +14 (Typ.) +32 12V DC 50 ohm <1.5:1
11
1
DUAL BAND BDA’s DUAL BAND BDA’s The Dual-Band Bi-Directional Amplifiers (BDA's) extend the coverage area of radio communications inbuildings and RF shielded environments. Units feature low noise figure and wide dynamic range. The design is a multi-block system, based on a Quad-path configuration with sharp out of band attenuation allowing improved isolation between the receiving and transmitting paths, plus SMR/Cell/GSM and PCS/DCS paths.
BDA-CELLXX/PCS/XX-0.5/0.5W-70-B or B1
INDOOR DUAL BAND for any cellular band combined with any PCS Blocks with 0.5W uplink and 0.5W downlink (@ 1 dB) and 70dB gain. Local visual alarms are included.
Frequency Band
0.5/0.5W CELL/X/PCS/X
Uplink
Downlink
Any band –Cellular Any band PCS
Any band –Cellular Any band PCS
1
Options: * Remote Monitoring Capability Via 9 Pin connector and pigtail
BDA-CELLXX/PCS/XX-1/1W-80-AB
INDOOR DUAL BAND for any cellular band combined with any PCS Blocks with 1W uplink and 1W or 10W downlink (@ 1 dB) and 80dB gain. Local visual alarms are included. 1/1W CELL/X/PCS/!X 1/10W CELL/X/PCS/X
Any band –Cellular Any band PCS Any band –Cellular Any band PCS
Any band –Cellular Any band PCS Any band –Cellular Any band PCS
Options: • Remote Monitoring Capability Via 9 Pin connector and pigtail • 2W CELL or 2W PCS
BDA-CELLXX/PCS/XX-1/25W-90-A or 1/50W-90-A
OUTDOOR DUAL BAND for any cellular band combined with any PCS Blocks with 1W or 2W uplink and 25W or 50W downlink (@ 1 dB) with 90 dB gain. 1/25W OUTDOOR CELL/X/PCS/!X 1/50W OUTDOOR CELL/X/PCS/X
Any band –Cellular Any band PCS Any band –Cellular Any band PCS
Any band –Cellular Any band PCS Any band –Cellular Any band PCS
Options: • Remote Monitoring Capability Via 7 Pin connector and pigtail • 2W CELL or 2W PCS
Ask for specs.
12
ONE WAY BOOSTER
Our INDOOR ONE WAY BOOSTER for, VHF, UHF, GPS, 700, 800, 900, 1800, 1900, 2100 and 2500 MHz, 20dBm power (@ 1 dB) and 70 dB Gain or 25, 27 or 33 dBm power (@ 1 dB) and 80dB Gain. Units feature extremely Low Noise figure and a wide dynamic ALC range. The boosters are an economic solution when ONLY ONE WAY signal boosting is required.
Frequency Band AS required
NOTE: We can offer one way Boosters – for other frequencies: UHF, DCS, PCS and GPS…please call for specs and prices!!!!
Part #
GAXXX/4/70SK-A1
GAXXX/5/80SK-B
GAXXX/5/80SK-B1
GAXXX/5/80SK-A2
GAIN (Minimum attenuation) [dB] GAIN Flatness [dB] Noise Figure [dB] Manual Attenuation Range (Continuous) Power Output @ 1 dB Compression [dBm] Output Power ALC Set [dBm] Output Composite Power [dBm] rd 3 Order Output Intercept Point [dBm] @ 2 Tones + 20 dBm each Power Supply
70 +/- 1 (Max.) 4 (Max.) 3 (Typ.) 0 to 30 in 2 dB steps. +27 (Typ.) + 20 +/- 1 +20 (Typ.) +39
80 +/- 1.5 (Max.) 5 (Max.) 4 (Typ.) 0 to 30 in 2 dB steps. +32 (Typ.) + 25 +/- 1 +25 (Typ.) +45
80 +/- 1.5 (Max.) 5 (Max.) 4 (Typ.) 0 to 30 in 2 dB steps. +34 (Typ.) + 27 +/- 1 +27 (Typ.) +47
80 +/- 1.5 (Max.) 5 (Max.) 4 (Typ.) 0 to 30 in 2 dB steps. +40 (Typ.) + 33 +/- 1 +33 (Typ.) +50
+15 VDC/0.7A
Input/Output Impedance VSWR IN/OUT Propagation Delay
50 ohm <1.5:1 < .25
110 to 220 VAC (Autoranging) 50 to 60 Hz 50 ohm <1.5:1 < .25
110 to 220 VAC (Autoranging) 50 to 60 Hz 50 ohm <1.5:1 < .25
110V to 220 VAC (Autoranging) 50 to 60 Hz 50 ohm <1.5:1 < .25
Options: • Visual Alarm • Visual Alarm + Remote Monitoring Via 9 Pin Connector
13
FIBER LINK – ONE WAY
ONE WAY Fiber BOOSTER One-way Fiber link is offered in 1:1 and 1:4 Master and Remote configurations. The Master serves not only as a pre-Selector, but as an enhanced selective front End Booster with 35dB Gain. These links offer 55 to 70 dB link Gain, superb Noise Figure and Excellent IP3 performance, regardless of the Composite power output for the remote unit. Offered for; VHF, UHF, PSS, SMR, CELL, DCS PCS and UMTS bands as we as Dual Band and Multi Bands on the same DAS. Visual alarms for Laser and Amplifier are included in price. UMTS Dual Band*
* Dual Band = any combination of 2 bands that are non contiguous in
Public Safety 700/800, ESMR800/900, Cell/PCS, GSM900/DCS1800 Opti ons ADD 19" rack Nema 4 External Monitoring Via 9 pin connector External Monitoring Via 7 pin connector for NEMA 4 S1 - External DC for Back Up option FOR ADDITIONAL OPTIONS - CONTACT US
14
FIBER LINK – BDA’s
Fiber link is offered in 1:1 and 1:4 Master and Remote configurations. The Master serves only as a PreSelector with an input signal protection circuit and attenuator. The links offer 45 to 55 dB link Gain, superb Noise Figure and Excellent IP3 performance, regardless of the Composite power output for the Remote unit. This type of Master offers initial selectivity with a reduced Noise Floor and allows the use of external Front End BDA’s as needed. G-Way/G-Wave offers a complete line for such Front End BDA’s with Downlink Composite power of +15dBm, which can be easily reduced to -10 to 0dBm input power going to the Fiber Optic Transceiver without the need for External Attenuators. Offered for: UHF, PSS, SMR, CELL, DCS PCS and UMTS bands as well as Dual Band and Multi Band on the same DAS. Visual alarms for Laser and Amplifier are included in price. Master 1:1
1:4
CELL or PCS or Public Safety UHF UMTS Dual Band* * Dual Band = any combination of 2 bands that are non contiguous in
Public Safety 700/800, ESMR800/900, Cell/PCS, GSM900/DCS1800 Options a dd 19" rack Nema 4 External Monitoring Via 9 pin connector * External Monitoring Via 7 pin connector for NEMA 4 S1 - External DC for Back Up option FOR ADDITIONAL OPTIONS - CONTACT NAVAIR at 1-800-668-7440
15
Remote 0.5W 20dBm
1W 25 dBm
2W 27 dBm
10W 33 dBm
ACCESSORIES
We carry a full line of accessories for the Telecommunication market: Filters:
Cavity filters manufactured by G-Way/G-Wave exhibit Unmatched LOW Insertion Loss, High Selectivity, and Excellent Passive Intermodulation performance. The filters we offer as accessories are needed for most installers/integrators and system designers. We offer both BAND REJECT and BAND PASS Filters as needed – Please contact us with any requirement.
Diplexers: When two filters are connected together at one side a Diplexer is created. The Diplexer is a 3 port device. In Wireless Communications, diplexers are used to connect the Receive path (Rx) and Transmit path (Tx) to one Common or Antenna port. G-Way/G-Wave uses a vast variety of High “Q” Cavity Diplexers in most systems offered, and some products are offered as accessories needed for most installers/integrators and system designers. Please contact us with any requirement. Duplexers:
When two filters are connected together at both ends a Duplexer is created. The Duplexer is a 2 port device. In Wireless Communications, duplexers are used to enhance selectivity of BDA’s or TMA’s. G-Way/G-Wave uses a vast variety of High “Q” Cavity Duplexers, and some products are offered as accessories needed for most installers/integrators and system designers.
Please contact us with any requirement.
Cross Band Couplers: We offer a large variety of Cross Band Coupler when you need to combine a number of Carriers in various bands such as VHF/UHF/CELL/PCS/UMTS etc. in the same DAS (Distribution Antenna System) - Please contact us with any questions. NAVAIR at 1-800-668-7440.
Description
PART #
SMR+CELLAB/PCSN SMR 800!SMR 900 UHF + CELL Wideband Combiner up to WiMax+ Wideband Combiner Duplexer CELL AB High “Q” Dual filter Assembly SMR High “Q” Dual filter Assembly ESMR
CD880/1922SK-E3 CD881/60SK-M3 CD520/880SK-E3 CD2400/5787MK-D2 CD2200/2450MK-D3 CBB859/25SK-D3 CBB836/15SK-S1 CBB838/18SK-S1
LOW Pass Band
HIGH Pass Band
806-894 MHz 806-866 MHz
1850-1995 MHz 896-941 MHz
NEW!!!! NEW!!! 824-849 MHz 806-821 MHz 806-824 MHz
ASK For SPEC ASK For SPEC 869-894 MHz 851-866 MHz 851-869 MHz
Splitters/Combiners:
Each
The Splitter/Combiners share a common stripline design for low power indoor applications covering all the wireless services from 800 to 2500 MHz. The extremely wide range allows use with multi-band antennas and leaky cable systems.
PART #
Description
MSI-B0221 MSI-B0321 MSI-B0421 MSI-PS-B0221 MSI-PS-B0321 MSI-PS-B0421 MSI-B0621 MSI-B0260 MSI-B0360 MSI-B0460 AMA-2255-2N AMA-2255-3N AMA-2255-4N
2 way splitter, 30 W 3 way splitter, 30 W 4 way splitter, 30 W 2 way splitter, 30 W 3 way splitter, 30 W 4 way splitter, 30 W 6 way splitter, 30 W UHF 2 way splitter, 30 W UHF 3 way splitter, 30 W UHF 4 way splitter, 30 W High PIM performance 2 Way, 100 W High PIM performance 3 Way, 100 W High PIM performance 4 Way, 100 W
Pass Band
16
800-2500 MHz 800-2500 MHz 800-2500 MHz 760-2500 MHz 760-2500 MHz 760-2500 MHz 800-2500 MHz 380-520 MHz 380-520 MHz 380-520 MHz 800-2500 MHz 800-2500 MHz 800-2500 MHz
Each
Directional Couplers: Our updated Coupler/Splitter range was specifically designed for Cellular Telecommunications, PCS and UMTS, and now also includes the Public Safety 700 and UHF bands. The couplers are designed for in-building network distribution applications.
PART # MSI-B201-XX MSI-PS-B201-XX MSI-B1600-XX AMA-1255-XX-1W
Description
Pass Band
Directional coupler – up to 30Watts –3, 4.8, 6, 7, 10, 20 dB Directional coupler including Public Safety – up to 30Watts – 3, 4.8, 6, 7, 10, 20 dB UHF Directional coupler – up to 30Watts –3, 4.8, 6, 7, 10, 20 dB High PIM Performance Directional coupler – up to 100Watts –3, 4.8, 6, 7, 10, 15 dB
Each
800-2500 MHz 760-2500 MHz 380-520 MHz 800-2500 MHz
Antennas:
Our updated line includes Yagi antennas for CELLULAR, Yagi antennas for PCS and wide band indoor distribution Omni antennas.
PART #
Description
TDJ-8019010YG TDJ-1912YG TDI-800/2500 TQI-4FC-1 LPDA-A0021-02
10 dBi 824-960 YAGI Antenna 12 dBi 1850-1990 YAGI Antenna 3 dBi INDOOR Panel Antenna 2 dBi INDOOR OMNI Antenna 11 dBi Dual Band YAGI Antenna
Pass Band
17
824-960 MHz 1850-1990 MHz 800-2500 MHz 800-2500 MHz 800-2200 MHz
Each
18
19
