Product Overview And Cd-rom Catalog

Transcript

Custom HVAC Transducers PRODUCT OVERVIEW AND CD-ROM CATALOG Solving your signal interface needs for over 25 years 14 West Vine Street -- Murray, Utah 84107 Phone (801) 262-6400 -- Fax (801) 261-3796 Toll free (800) 261-3602 -- Email: [email protected] See our Web site -- www.atkinsonelectronics.com PRODUCT APPLICATION CATALOG PRODUCT CATEGORIES SIGNAL ISOLATION DEVICES SIA08 DIA08 DISM-E - 1 CH PRECISION ISOLATION MODULE WITH ISOLATION TRANSFORMER . . . . . . . . . . . . . . . . 1 2 CH PRECISION ISOLATION MODULE WITH ISOLATION TRANSFORMER . . . . . . . . . . . . . . . . 1 2 CH 0-10V / 4-20mA ISOLATION MODULE WITH ISOLATION TRANSFORMER . . . . . . . . . . . . . 1 SIGNAL CONVERTERS AND SCALERS ASM1 SBM DCIM-SC - ANALOG SCALING MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SIGNAL BUFFER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SIGNAL CONVERTER AND SCALING MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SORM VMAC PACM - SIGNAL OVERRIDE MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 VOLTAGE TO mA CONVERTER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 PROGRAMMED ANALOG SCALING MODULE (EMBEDDED CONTROLLER MODULE) . . . . . . . . 3 ASM2 DISM-D DFCM - PHASE CUT TO ANALOG SCALING MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2 CH PHASE CUT TO ANALOG ISOLATION MODULE WITH ISOLATION TRANSFORMER . . . . . 4 2 CH ANALOG INPUT TO FLOATING CONTROLLER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 DPCM DSAM SIA05A - 2 CH ANALOG INPUT TO PWM CONTROLLER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2 CH ANALOG SIGNAL SEQUENCING MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 PSI TO ANALOG SIGNAL CONVERTER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 SIA07A UPAC-D UPAC-CNT - 6 INPUT HIGH/ LOW/ AVERAGE SIGNAL INTERFACE MODULE . . . . . . . . . . . . . . . . . . . . . . . . . 6 UNIVERSAL PULSE INPUT TO ANALOG CONVERTER (rev.D) . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PULSE COUNTER TO 4-20mA and 0-10V DC OR 0-5V DC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 UNIVERSAL INPUT AND SIGNAL CONVERTERS UIPCM UIPT UIRO - UNIVERSAL INPUT TO PULSE CONVERTER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 UNIVERSAL INPUT TO PNEUMATIC TRANSDUCER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 UNIVERSAL INPUT TO RESISTANCE OUTPUT MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 ADJUSTABLE & FIXED VOLTAGE/CURRENT RELAYS AVR1A AVR4C VRDC - ADJUSTABLE VOLTAGE SENSITIVE RELAY - ANALOG CONTROL . . . . . . . . . . . . . . . . . . . . . . . 8 ADJUSTABLE 4 CH. VOLTAGE SENSITIVE RELAYS - ANALOG CONTROL . . . . . . . . . . . . . . . . . 8 ADJUSTABLE DC VOLTAGE SENSITIVE RELAY- WITH TIME DELAY . . . . . . . . . . . . . . . . . . . . . . 8 PMR4 MCRM LCRM - PWM TO MULTISTAGE RELAY MODULE (2/4 RELAYS) for DELTA BACstat II . . . . . . . . . . . . . . . 9 MULTI-CHANNEL RELAY MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 LOW CURRENT RELAY MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 PRM DPRM - PILOT RELAY MODULE 24VAC CONTROL VOLTAGES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 DUAL PILOT RELAY MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 MAGNETIC VALVE, PHASE CUT SIGNAL DRIVERS DCIM-PCD PCDO SMVD - PHASE CUT SIGNAL DRIVER MODULE 27W, 40W, 80W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 PHASE CUT DUAL OUTPUT MODULE 40W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 STAEFA MAGNETIC VALVE DRIVER 40W, 80W, & 120W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 S1Pi DCIM-FP - STAEFA SMART 1 PROPORTIONAL INTERFACE MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 FLOATING & PWM INPUT TO PHASE CUT CONVERTER 27W, 40W, 80W . . . . . . . . . . . . . . . . . 12 SIGNAL INDICATION DIM3 DIM3-LP DIM3-RSP - DIGITAL INDICATION METER - PS +5, 6, 15VDC, & 24V AC (LCD OR LED) . . . . . . . . . . . . . . . . . 13 DIGITAL INDICATION METER - LOOP POWERED (LCD ONLY) . . . . . . . . . . . . . . . . . . . . . . . . . . 13 DIGITAL LCD METER WITH SM2 RESET POTENTIOMETER . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 RH-LCD RS-LCD RS-2101D - DIGITAL INDICATION ROOM HOUSING - PS +5,15VDC, & 24V AC/DC (LCD) . . . . . . . . . . . . . . . 14 DIGITAL INDICATION ROOM SENSOR - PS +5,15VDC, & 24V AC/DC (LCD) . . . . . . . . . . . . . . . . 14 STAEFA DDC VERSION ROOM SENSOR WITH LCD DIGITAL DISPLAY . . . . . . . . . . . . . . . . . . . 14 ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796, E-MAIL: [email protected] www.atkinsonelectronics.com REV 10/04 PRODUCT APPLICATION CATALOG PRODUCT CATEGORIES SENSORS - TRANSMITTERS AD590 RS-DCP VRWM - ANALOG DEVICES CURRENT TEMPERATURE SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 ROOM SENSOR - DUAL COMMUNICATION WALL SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 VANDAL RESISTANT, WALL MOUNT SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 UMATR - UNIVERSAL mA TRANSMITTER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 SPECIALTY CONTROLLERS & INTERFACE MODULES WAM - WIRE ADDER MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 CRM2 HOA-100 HOA-102S - STAEFA SM2 CUSTOM RANGE MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 4 CHANNEL 0-10VDC HAND-OFF-AUTO BOARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2 CHANNEL 0-10VDC HAND-OFF-AUTO BOARD W/ SWITCH STATUS . . . . . . . . . . . . . . . . . . . . 17 Di16CIB ROSM - DIGITAL 16 CHANNEL ISOLATION BOARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 DOOR ACTUATED ROOM OFFSET SWITCHING MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 POWER SUPPLY ISOLATION DEVICES IPS-2/4 IPXFMR DCPS - ISOLATED POWER SUPPLY 2 & 4 CHANNEL AC/DC ISOLATION . . . . . . . . . . . . . . . . . . . . . . . . 19 ISOLATED POWER TRANSFORMER 2, 4, & 6 CHANNEL AC ISOLATION . . . . . . . . . . . . . . . . . 19 DC POWER SUPPLY MODULE (NON ISOLATED) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 COMMUNICATION DEVICES INCLUDING LONWORKS AETI-232 AETI-485 AETI-FO - SM2-TTL TO TTL TO RS-232 COMMUNICATION REPEATER . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 SM2-TTL TO TTL TO RS-485 COMMUNICATION REPEATER . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 SM2-TTL TO RS-485 TO FIBER OPTIC CABLE COMMUNICATION REPEATER . . . . . . . . . . . . . . 20 DRFB FR485 - DUAL CHANNEL RS-485 TO FIBER OPTIC COMMUNICATIONS MODULE . . . . . . . . . . . . . . . . . . 21 FIBER REPEATER 485 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 LNFR PLFT24 RCM4 - LONWORKS NETWORK FIBER OPTIC REPEATER, SINGLE & DUAL FIBER OUTPUTS . . . . . . . 22 POWER LINE TO FREE TOPOLOGY LONWORKS ROUTER 24V . . . . . . . . . . . . . . . . . . . . . . . . . 22 RELAY CONTROL MODULE, FREE TOPOLOGY & POWER LINE TRANSCEIVER . . . . . . . . . . . . 22 AUXILIARY PRODUCTS NSFB SNAP TRACK FUSE - NOISE SUPPRESSION & FILTER BOARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 RDI SNAP TRACK 2.125", 3", 3.25" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 LITTELFUSE 2AG SERIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 JUMPERS GAUGE KIT VIP FB420I AMP .1" SHUNT WITH HANDLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 0-30 PSI GAUGE KIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 PNEUTRONICS 4-20mA TO 3-15PSI TRANSDUCER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 - PRODUCT PRICING AND WARRANTY INFORMATION PRICE LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 TERMS AND CONDITIONS OF SALE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 FOR COMPLETE PRODUCT INFORMATION, PLEASE REFER TO THE ENCLOSED CD OR VISIT OUR WEB SITE AT www.atkinsonelectronics.com. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796, E-MAIL: [email protected] www.atkinsonelectronics.com REV 10/04 2005 PRODUCT OVERVIEW SIGNAL ISOLATION DEVICES PRECISION SIGNAL ISOLATOR / CONVERTER MODULE SIA08 FEATURES v v v v Jumper selectable voltage/current input On-board isolation transformer 4-20mA output will source a 750V impedance Direct/Reverse jumper for output APPLICATIONS v v v Precision signal isolation for EMS systems VFD signal isolation General signal input/output isolation DESCRIPTION The SIA08 is a precision, signal isolator module, that has an Input/Output isolation of 2.5KV and onboard isolation transformer. The Inputs/Outputs are jumper selectable. DUAL PRECISION SIGNAL ISOLATOR / CONVERTER MODULE DIA08 FEATURES v v v v v Dual channel input/output isolation On-board isolation transformer Jumper selectable voltage/current inputs & outputs 4-20 mA output will source a 600V V impedance Direct/Reverse jumper for each output APPLICATIONS v v v Precision signal isolation for EMS systems VFD signal isolation Sequencing two 4-20 mA, 0-5V or 0-10V DC signals from single analog signal DESCRIPTION The DIA08 is a two channel precision, signal isolator, that has an Input/Output isolation of 2.5KV and onboard isolation transformer. The Inputs/Outputs are jumper selectable. DUAL ISOLATED SIGNAL MODULE DISM-E FEATURES v v v v v 2 channel isolated output On-board isolation transformer & EMI noise filtering Jumper selectable voltage/current output 4 to 20 mA output will source a 650V V load Built-in over-current protection APPLICATIONS v v v 0-10V DC and 4-20mA signal splitting or sequencing 2 channel signal isolator Dual channel VFD driver DESCRIPTION The DISM-E is a two channel precision, signal isolator, that has an Input/Output isolation of 2.5KV and onboard isolation transformer. The Inputs/Outputs are jumper selectable. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -1- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW SIGNAL CONVERTERS AND SCALERS ANALOG SCALING MODULE ASM1 FEATURES v v v v v 24V AC operation Output can sink input’s pull-up voltage Optional Zero & Span potentiometers Small size 1.10" by 2.19" Two mounting options APPLICATIONS v v v Analog 0 to 5V DC & 0 to 10V DC scaling Rescale non - standard sensors Rescale non - standard voltages DESCRIPTION The ASM1 is designed as an analog signal scaling module to rescale control voltages or sensor signals to meet the input requirements of various types of controllers. SIGNAL BUFFER MODULE SBM FEATURES v v v Single or dual input option jumper Four buffered outputs 2 3/16" Snap Track Mounting APPLICATIONS v v v Master/slave configuration of a control signal for up to five controllers Master/slave configuration of two control signals for two additional controllers Signal buffering to four valve or damper actuators DESCRIPTION The SBM is a signal buffer module, two inputs with four buffered outputs that track the input signal. DCIM SIGNAL CONVERTER MODULE DCIM-SC FEATURES v v v v v Optically isolated inputs Fused 24V AC power supply Field adjustable output Input & power LED indication Optional minimum position pot APPLICATIONS v v v v Phase cut to mA/V DC Scaling, inverting, sequencing High/Low signal selection VFD's, dampers, chiller reset DESCRIPTION The DCIM-SC is designed for conditioning 0 to 10V, 4 to 20mA, or converting Staefa’s phase cut signal to standard 0 to 10V, 4 to 20mA control signal. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -2- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW SIGNAL CONVERTERS AND SCALERS SIGNAL OVERRIDE MODULE SORM FEATURES v v v v Analog 0 - 10V DC signal input/output Minimum position override potentiometer Freeze stat override input 2 3/16" Snap Track Mounting APPLICATIONS v v SM2 Plus outside damper control with minimum position and lockout control SM2 Plus reheat valve control with freeze stat override DESCRIPTION The SORM is a dual function signal override module, designed for Staefa’s SM2 Plus controller. It provides a minimum position and freeze stat override capability. ANALOG VOLTAGE TO mA CONVERTER MODULE VMAC FEATURES v v v v 24V AC or DC operation Zero potentiometer Small size 1.10" by 2.19" Two mounting options APPLICATIONS v v Coverts 0 - 10V DC to 4 - 20mA to drive HVAC Actuators (see specifications for calibration) NOT for VFD applications DESCRIPTION The VMAC is a voltage to 4 to 20mA converter module, designed as a low cost signal converter for driving actuators that use a 4-20mA input signal. PROGRAMMABLE ANALOG CONTROL MODULE PACM FEATURES v v v Two channel conversion Transformer isolation onboard Isolated 24V AC for velocity sensor APPLICATIONS v v v v v Velocity sensor conversions Velocity sensor linearization Square root extraction Air quality control for roof top units Multi-channel signal processing DESCRIPTION The PACM is a programed analog control module. It is designed to accept multiple input signals and perform specific functions (nonlinear signal conversions, square root extraction, proportional control, etc.). ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -3- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW SIGNAL CONVERTERS AND SCALERS ANALOG SCALING MODULE ASM2 FEATURES v v v v 24V AC or DC operation Optically isolated input Zero & Span potentiometers Small size 1.10" by 2.19" APPLICATIONS v v v Converts phase cut to drive valve or damper actuators Converts phase cut to drive most VFD’s Provides phase cut isolation for multiple zone valves DESCRIPTION The ASM2 is designed as a Staefa phase cut signal converter module for interfacing to 0 to 5V or 0 to 10V DC input devices. DUAL ISOLATED SIGNAL MODULE DISM-D FEATURES v v v v v 2 channel isolated output On-board isolation transformer & EMI noise filtering Jumper selectable voltage/current output 4 to 20 mA output will source a 650V V load Built-in over-current protection APPLICATIONS v v v Phase cut to 0-10V DC / 4-20mA signal splitting or sequencing 2 channel signal isolator Dual channel VFD driver DESCRIPTION The DISM-D is a two channel precision, signal converter, that has an Input/Output isolation of 2.5KV and onboard isolation transformer. The outputs are jumper selectable. DUAL CHANNEL FLOATING CONTROLLER MODULE DFCM FEATURES v v v v Jumper selectable analog input Jumper selectable output pulse timing Two 24V AC tri-state triac outputs Dual pipe system change-over option APPLICATIONS v v v v 0 - 20 mA to tri-state floating 0 - 10V DC to tri-state floating Phase cut to tri-state floating Dual tri-state damper or valve operation DESCRIPTION The DFCM is a two channel analog to tri-state floating controller module. It converts 0 to 10V, 0 to 20mA or phase cut to a tri-state 24V AC output signal rated for 4 Amps. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -4- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW SIGNAL CONVERTERS AND SCALERS DUAL CHANNEL PWM CONTROLLER MODULE DPCM FEATURES v v v Jumper selectable analog input Jumper selectable output pulse timing Two 24V AC PWM triac outputs APPLICATIONS v v v v 0 - 20 mA to pulse width modulation 0 - 10V DC to pulse width modulation Phase cut to pulse width modulation Dual PWM valve or damper operation DESCRIPTION The DPCM is a two channel analog to PWM controller module. It converts 0 to 10V, 0 to 20mA or phase cut to a pulse width modulated 24V AC output signal rated for 4 Amps. DUAL CHANNEL SEQUENCING ANALOG MODULE DSAM FEATURES v v v v Dual channel phase cut to analog output Dual channel voltage/mA to voltage output Jumper selectable sequencing option Direct or reverse options per output APPLICATIONS v v v v Dual phase cut to 0 to 10V DC conversion Phase cut to sequenced 0 to 10V DC outputs 0 to 10V DC to sequenced 0 to 10V DC outputs Dual 0 to 10V DC damper or valve operation DESCRIPTION The DSAM is a two channel analog sequencing module. It sequences either 0 to 20mA or 0 to 10V DC input to two 0 to 10V DC outputs. PRESSURE INPUT TO ANALOG OUTPUT MODULE SIA05A FEATURES v v v v Measures differential & gauge pressures Linear 4-20 mA & 0-10V DC outputs External differential sensor inputs Temperature compensation for accuracy APPLICATIONS v v v Differential pressure monitoring Pneumatic system monitoring Pneumatic to analog conversion DESCRIPTION The SIA05A is a pressure to analog signal transducer configured for differential pressure 3-15psi or 0-20psi. It provides both a linear current and voltage output signals. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -5- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW SIGNAL CONVERTERS AND SCALERS SPECIAL FUNCTION ANALOG SIGNAL INTERFACE SIA07A FEATURES v v v v 6 simultaneous signal inputs Second power supply for sensors, etc. EMI noise filtering on outputs ZERO and SPAN adjustments APPLICATIONS v v v v High/Low signal selection Signal summing Sensor averaging Custom signal scaling DESCRIPTION The SIA07A is a multiple input, special function interface module, designed to perform high and/or low signal selection, averaging, or summing, of up to six (6) like analog signals. It will provide a standard or custom voltage signal or 4-20 mA signal output. UNIVERSAL PULSE TO ANALOG CONVERTER MODULE UPAC FEATURES v v v v v Field selectable PWM, tri-state inputs 256 step resolution, no rollover Timing calibrated to input signal Optically isolated inputs Input and power LED indication APPLICATIONS v v PWM or tri-state floating to analog conversion DO Control of VFD’s or damper actuators DESCRIPTION The UPAC is an universal pulse to analog converter module, designed to convert PWM or tri-state pulse signals to analog 0 to 10VDC, 0 to 5VDC or 4 to 20mA signals. PULSE COUNTER TO ANALOG CONVERTER MODULE UPAC-CNT FEATURES v v v v Field selectable input pulse per second 256 step resolution, no rollover Timing calibrated to input signal Optically isolated inputs APPLICATIONS v v v Pulse per second to analog conversion KW pulse meter to analog conversion Flow pulse meter to analog conversion DESCRIPTION The UPAC-CNT is a customized application specific interface module designed to convert pulse from KW, water or flow meters to an analog signal. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -6- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW UNIVERSAL INPUT SIGNAL CONVERTERS UNIVERSAL INPUT TO PULSE CONVERTER MODULE UIPCM FEATURES v v v v Optional feedback input for closed loop control Jumper selectable analog input DIP switch selectable input/output pulse types Open collector or 24V AC triac output available APPLICATIONS v v v 0 - 20 mA & 0 - 10V DC to tri-state floating or PWM PWM to tri-state floating Phase cut to tri-state floating or PWM DESCRIPTION The UIPCM accepts all standard analog, pulse, and phase cut signals and converts them to a PWM or tri-state floating AC or DC voltage outputs. Optional feedback input available. UNIVERSAL INPUT TO PNEUMATIC TRANSDUCER MODULE UIPT FEATURES v v v v v v v Non-bleed device (no air usage in steady state) Internal accurate closed loop control DIP switch selectable pulse & phase cut inputs, direct or reverse action Jumper selectable analog inputs Does not require instrument quality air Manual positioning adjustment Optional bleed or maintained output on power loss APPLICATIONS v v v 0 to 20 mA or 0 to 10 V to pneumatic PWM or tri-state floating to pneumatic Phase cut to pneumatic DESCRIPTION The UIPT accepts all standard analog, pulse and phase cut signals and converts them into a 3 to 15 psi pressure output signal. Optional feedback output available. UNIVERSAL INPUT TO RESISTANCE OUTPUT MODULE UIRO FEATURES v v v v Jumper selectable analog input DIP switch selectable input type & time bases 256 step output resolution Field changeable resistance output module APPLICATIONS v v 0 - 20mA, 0 - 10V, and phase cut to resistance PWM and tri-state floating to resistance DESCRIPTION The UIRO accepts all standard analog, pulse, and phase cut input signals and converts them to a linear 256 step resistance output. Resistance module field changeable. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -7- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW ADJUSTABLE & FIXED VOLTAGE RELAYS ADJUSTABLE VOLTAGE SENSITIVE RELAY AVR1A FEATURES v v v v v Linear operation 12A/250V AC contacts Single-turn or multi-turn adjustment pots Jumper selectable input LED relay position indication APPLICATIONS v v v v Analog to on/off conversion Differential control Analog signal alarms Low/High limit set points DESCRIPTION The AVR1A is an adjustable voltage/current relay. It is designed to provide adjustable trip on/off points on a SPDT relay with contacts rated for 12 Amps 250V AC. FOUR CHANNEL ADJUSTABLE VOLTAGE SENSITIVE RELAY AVR4C FEATURES v v v v v Linear operation 12A/120V AC contacts Four channel for staging Jumper selectable input LED relay position indication APPLICATIONS v v v v Analog to on/off control Four step staging control Analog signal alarms Low/High limit set points DESCRIPTION The AVR4C is a 4 channel adjustable voltage/current relay. It is designed to provide adjustable trip on/off points on four SPDT relays with contacts rated for 12 Amps 120V AC. ADJUSTABLE VOLTAGE SENSITIVE RELAY MODULE WITH TIME DELAY VRDC FEATURES v v v v v Operates over 10 to 35V DC range and 24V AC Adjustable thresholds for cut-in and cut-out points 12 Amp SPDT relay contact Reversible action with the cut-in, cut-out settings Adjustable time delay 0 to 255 sec. on cut-in APPLICATIONS v v v v Low voltage cutoff and generator control HVAC heating & cooling staging Hydro-electric power shunt Battery charge controller DESCRIPTION The VRDC is an adjustable DC voltage relay module, designed for applications where a varying DC voltage is used to switch a relay, such as in generator control. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -8- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW ADJUSTABLE & FIXED VOLTAGE RELAYS PULSE WIDTH MODULATION MULTISTAGE RELAY PMR4 FEATURES v v v v Linear staging operation 12A/120V AC relay contacts 24V AC or DC operation LED relay position indication APPLICATIONS v v v PWM to on/off control Two stage heating, two stage cooling Four step staging control DESCRIPTION The PMR4 is a pulse to relay output module designed to work with Delta’s BACstat II DNT-T Series Controllers or other PWM output controllers. It converts standard PWM timing range signals to relay outputs. MULTIPLE CHANNEL SPDT RELAY MODULE MCRM FEATURES v v v v v 10 channels of SPDT relays LED indication for each relay .187" Spade termination 24V AC or DC operation Small size (2.187" X 8.0") APPLICATIONS v v Voltage/current signal switching Indication lamp status switching DESCRIPTION The MCRM is a ten channel SPDT relay module. Each relay channel has LED indication, input termination and relay contact terminations. It is available in a 1 Amp rated relay (MCRM-1) or a 10 Amp rated relay (MCRM-10) . LOW CURRENT RELAY MODULE LCRM FEATURES v v v v v Analog signal conversion to SPDT contact 12Amp/120V AC rated contacts LED relay position indication 24V AC or DC operation Small size 1.1" by 2.19" APPLICATIONS v v v Analog conversion to on/off control Analog lighting control Remote fan start - stop control DESCRIPTION The LCRM is a low current voltage relay module. It is designed to allow a switched voltage signal to trigger a SPDT relay. It has a relay output rated at 12A @ 120V AC. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -9- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW ADJUSTABLE & FIXED VOLTAGE RELAYS PILOT RELAY MODULE PRM FEATURES v v v v 24V AC or DC operation 12Amp/120V AC rated contacts LED relay indication Small size 1.2" by 2.3" APPLICATIONS v v v v Remote mounted control relay Maintain low voltage panel requirements Remote fan start - stop control Status feedback relay DESCRIPTION The PRM is a 24V AC/DC Pilot Relay Module. A green LED indicates when the relay is energized. The PRM uses a SPDT relay output rated at 12A @ 120V AC. DUAL PILOT RELAY MODULE DPRM FEATURES v v v v 24V AC or DC operation 15 Amp/120V AC rated contacts Two pilot relays in one enclosure Small size 1.2" by 2.3" APPLICATIONS v v v Remote mounted control relays Maintain low voltage panel requirements Status feedback relay DESCRIPTION The DPRM is a dual pilot relay module that accepts 24V AC/DC control signals and provides SPDT (form C) relay contact outputs rated at 15A @ 120V AC and 15A @ 28V DC. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -10- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW PHASE CUT SIGNAL DRIVERS PHASE CUT SIGNAL DRIVER MODULE DCIM-PCD FEATURES v v v v Input to output isolation 27, 40, or 80 watts output power Fused 24V AC power supply Input and power LED indication APPLICATIONS v v v v v mA/V DC to phase cut conversion DDC control of Staefa magnetic valves Phase cut signal scaling & sequencing High or low signal selection Minimum position override DESCRIPTION The DCIM-PCD is designed for converting 0 to 10V DC or 4 to 20mA signals to Staefa’s phase cut signal for driving magnetic valves and damper actuators. DUAL PHASE CUT SIGNAL DRIVER MODULE PCDO FEATURES v v v v v Two channel output Isolated phase cut inputs Isolated milliamp inputs High reliability mosfet outputs On-board fuse protection APPLICATIONS v v v v Signal splitting Dual valve driver Same signal sequencing One or two channel mA or DC to phase-cut DESCRIPTION The PCDO is a two channel 40W phase cut driver module, that converts 0 to 10V, 4 to 20mA signal to the Staefa phase cut signal for driving magnetic valves and damper actuators. STAEFA MAGNETIC VALVE DRIVER MODULE SMVD FEATURES v v v v v High reliability 40, 80 or 120 watt power ratings Universal analog input Optically isolated phase cut input Lower operating temperature APPLICATIONS v v v v Phase cut amplification Milliamp & DC input to phase cut output Valve sequencing from same signal Isolated milliamp input valve driver DESCRIPTION The SMVD is designed to drive Staefa’s large magnetic valves. It is available as a phase cut amplifier or as a 0 to 10V DC/420mA converter module. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -11- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW PHASE CUT SIGNAL DRIVERS STAEFA SMART 1 PROPORTIONAL INTERFACE MODULE S1Pi FEATURES v v v v v Direct replacement for Staefa’s Smart 1 SMPI Mounts on original SMPI 4" sq. plate 27, 40, or 80 watts output power options Fused 24V AC power supply Minimum position or manual potentiometer APPLICATIONS v v v Replacement for Staefa’s SMPI valve driver 0 to 20mA to phase cut conversion 0 to 10V DC to phase cut conversion DESCRIPTION The S1Pi (Smart 1 Proportional Interface Module) is a direct replacement part for Staefa’s SMPI (Smart 1 Proportional Interface). It interfaces between SM1 controller and zone valve. DCIM PULSE TO PHASE CUT CONVERTER MODULE DCIM-FP FEATURES v v v v v v Field selectable PWM, tri-state inputs 256 step resolution, no rollover Timing calibrated to input signal Optically isolated inputs Input and power LED indication Short resistant mosfet output APPLICATIONS v v v Pulse width modulation to phase cut Tri-state floating to phase cut DO Control of Staefa mag valves & actuators DESCRIPTION The DCIM-FP is designed for converting PWM or tri-state pulse signals to Staefa’s phase cut signal for driving Staefa’s magnetic valves and damper actuators. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -12- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW SIGNAL INDICATION DEVICES DIGITAL INDICATION METER DIM3 FEATURES v v v v Easy to read numbers On-board power supply Field calibration adjustments Ordering choice of LCD or LED display APPLICATIONS v v v v Temperature indication Humidity indication Percentage of operation display Differential pressure indication DESCRIPTION The DIM3 is a 3½ digit panel meter that can be ordered in either a LCD or LED version. It consists of Datel’s DMS-30 meter and a sub board for sensor or voltage input signal scaling. DIGITAL INDICATION METER DIM3-LP LOOP POWERED FEATURES v v v v Easy to read numbers Loop powered; no external supply required Field calibration adjustments Compact size APPLICATIONS v v v v Temperature indication Humidity indication Percentage of operation display Differential pressure indication DESCRIPTION The DIM3-LP is a 3½ digit LCD panel meter that is loop powered. It consists of Datel’s DMS-30LCD meter and a sub board for input signal scaling and powering the LCD display. DIGITAL INDICATION METER WITH SET POINT POTENTIOMETER DIM3-RSP FEATURES v v v v v v Easy to read 3½ digit display Choice of LCD or LED display Optional power supply for 24V AC/DC operation Remote set point potentiometer Push button for set point display User friendly calibration adjustments APPLICATIONS v Remote set point potentiometer with display DESCRIPTION The DIM3-RSP is a 3½ digit panel meter that can be ordered in either a LCD or LED version. It consists of Datel’s DMS-30 meter and a sub board with remote set-point potentiometer, and push button for viewing set-point value while setting. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -13- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW SIGNAL INDICATION DEVICES ROOM HOUSING WITH LCD DISPLAY RH-LCD FEATURES v v v v v 3 digit LCD display Display calibration pot Universal mount Neutral styling Mounting ring optional (from Staefa) APPLICATIONS v v Temperature indication Humidity indication DESCRIPTION The RH-LCD is a 3 digit LCD display mounted in a Staefa Room Housing. It is designed to accept a voltage signal and display an output range 0 to 100 or to 999 for RH sensors or various temperature sensors. ROOM SENSOR WITH LCD DISPLAY RS-LCD FEATURES v v v v v v v 3 digit LCD display with temperature sensor Display & sensor calibration pots Set point & override switches (optional) 8F & 8C selection switch Service tool jack Custom face plates available upon request Mounting ring optional (from Staefa) APPLICATIONS v Smart II room sensor w/temperature display v v SMVU room sensor w/temperature display RS room sensor w/temperature display DESCRIPTION The RSXXXXD is a Staefa Room Sensor with a LCD display. It is designed to provide a visual display of the room temperature. Standard options available. ROOM SENSOR WITH LCD DISPLAY FOR SM2-DDC RS-2101D FEATURES v v v v v v v 3 digit LCD display with thermistor sensor Display & sensor calibration pots Override switch (optional) 8F & 8C selection switch Service tool jack Custom face plates available upon request Mounting ring optional (from Staefa) APPLICATIONS v Smart II DDC room sensor w/temperature display DESCRIPTION The RS-2101D is a Staefa Smart 2 DDC Room Sensor with LCD display. It is designed to provide a visual display of the room temperature. Standard options available. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -14- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW SENSORS - TRANSMITTERS ANALOG DEVICES TEMPERATURE SENSOR AD590 FEATURES v v v v v v Linear current output 1m m A/K Wide range -5588C to 15088C Two-terminal device: voltage in/current out Laser trimmed to 62.588C accuracy Linearity: 6.888C over full range (AD590K) Wide power supply range: +4V to 30V APPLICATIONS v v Accurate temperature measurement and control OSA, hot /chilled water temperature sensing DESCRIPTION The AD590 is a two wire linear temperature sensor that produces a linear current output 1m A/8K. The AD590 comes with 12" leads. Duct and well mounting available. ROOM SENSOR - DUAL COMMUNICATION WALL SENSOR RS-DCP FEATURES v v v Dual temperature sensors Dual communication jacks Universal mount, mounting ring optional APPLICATIONS v Dual Smart II communications port & sensors in single wall housing to serve two Smart II VAV zone controllers where one location is specified DESCRIPTION The RS-DCP (Dual Communications Port) is used with the SMART II Controller in zone temperature control applications. In addition to two temperature sensors, separate communication jacks are provided for the two Staefa controllers. VANDAL RESISTANT WALL MOUNT SENSOR VRWM FEATURES v v v v Vandal resistant stainless steel Easy mounting to single gang box Neutral appearance Standard or custom sensors APPLICATIONS v Room sensor for schools, correctional facilities, or any other public areas DESCRIPTION The VRWM is a vandal resistant wall mount sensor, that contains one of several standard temperature sensors. It consists of a standard single gang stainless steel plate with the desired sensor mounted with thermal compound inside. A plexiglass backing is then permanently attached. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -15- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW SENSORS - TRANSMITTERS UNIVERSAL 2-WIRE CURRENT LOOP TRANSMITTER UMATR FEATURES v v v v Easy mounting to single gang box Accepts standard or custom sensors Wide power supply range 12 to 40V DC Field calibration potentiometers provided APPLICATIONS v v v v Transmit temperature signals long distances Narrow temperature ranges Voltage to 4-20mA loop conversion Remote temperature sensing DESCRIPTION The UMATR is a 2-wire, 4 to 20mA, transmitter designed to convert RTD’s, AD590's, thermistors and other low level signals to a 4 to 20mA current loop signal. Loop Powered. SPECIALTY CONTROLLERS & INTERFACES WIRE ADDER MODULE WAM FEATURES v v Easily mounts in furnace control box Output LED indication for fan, heating & cooling APPLICATIONS v The WAM allows HVAC contractors to reuse the existing 2-wire thermostat cable on air conditioning and furnace retrofits where installing a 4-wire cable would be required DESCRIPTION The WAM allows you to use a battery powered electronic thermostat and the existing two wires to save pulling a new cable on those impossible A/C add-on jobs. The signal combiner mounts in the thermostat, sends the heating, cooling and fan signals to the WAM mounted in the furnace. The WAM contacts pull in the heating, cooling and fan relays. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -16- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW SPECIALTY CONTROLLERS & INTERFACES CUSTOM RANGE MODULE FOR SMART II CRM2 FEATURES v v v v 100 % Staefa Smart II compatible Factory can customize for most applications Provides pull-up or load resistor for temperature sensors or current transmitters Voltage divider for 0 to 10V signals APPLICATIONS v v v Retrofits involving non Staefa sensors Narrow temperature ranges for chilled and/or hot water control loops Narrowing range of 4-20mA transducers DESCRIPTION The purpose of the CRM2 is to provide additional ranges for Staefa sensors and enable other types of sensors to be used with the Smart II and Smart II Plus controllers. HAND-OFF-AUTO BOARD HOA-100 FEATURES v v v v Buffered manual output signal 2 3/16" snap track mounting Standoff mounting 4 independent channels APPLICATIONS v v Damper signal override Hand-Off-Auto switching of control signals DESCRIPTION The HOA-100 is a 4 channel hand-off-auto board designed to pass a voltage signal in auto mode or provide an op-amp buffered adjustable voltage signal in hand mode. HAND-OFF-AUTO BOARD W/ STATUS FEEDBACK HOA-102S FEATURES v v v v v Buffered manual output signal Buffered status output signal 2 3/16" snap track mounting Standoff mounting 2 independent channels APPLICATIONS v v Damper signal override Hand-Off-Auto switching of control signals DESCRIPTION The HOA-102S is a 2 channel hand-off-auto board designed to pass a voltage signal in auto mode or provide an op-amp buffered adjustable voltage signal in hand mode. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -17- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW SPECIALTY CONTROLLERS & INTERFACES DIGITAL 16 CHANNEL ISOLATION BOARD Di16CIB FEATURES v v v Input to output isolation 24V AC/DC input to DC open collector output Input LED indication APPLICATIONS v v Monitor 24V AC digital signals with isolation Data acquisition of Htg/Clg signals using Delta’s DSC-1616 Controller DESCRIPTION The Di16CIB is designed to provide both signal conversion (AC to DC open collector) and input to output signal isolation. DOOR ACTUATED ROOM OFFSET SWITCHING MODULE ROSM FEATURES v v v v Four selectable Supply CFM voltage settings with switch position feedback value Supply CFM offset activated by N.O. door switch Two adjustable exhaust CFM voltage outputs Set-up jumper to simulate door for easy output configuration APPLICATIONS v Constant volume lab with Phoenix Supply/Exhaust values with door offset DESCRIPTION The ROSM is designed to provide an additional level of containment in either a negative or positive pressure laboratory environment. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -18- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW POWER SUPPLY ISOLATION DEVICES ISOLATION AC/DC POWER SUPPLY MODULE IPS-2/4 FEATURES v v v v v Transformer isolation Selectable voltage outputs Thermal overload protected Fused outputs Snap track mounted APPLICATIONS v v v AC power isolation Isolated DC power supply, ± DC power supply 2, 3 & 4 wire transmitter supply DESCRIPTION The IPS-2, or IPS-4 is a multi channel isolation AC/DC power supply designed to provide isolated 24V AC and adjustable DC voltages for powering peripheral devices. ISOLATION AC POWER SUPPLY MODULE IPXFMR FEATURES v v v v v Each 24V AC output is isolated Available in 2, 4 and 6 outputs Available with 24V or 110V AC primary Fuse protection on primary Snap track mounted APPLICATIONS v v v 24V AC isolation power supply Provide 24V AC isolation between full-wave and half-wave bridge devices Eliminate ground loops DESCRIPTION The IPXFMR is a multiple output isolated AC power supply designed to provide up to six (6) 24V AC isolated outputs, for powering peripheral devices. DC POWER SUPPLY MODULE DCPS FEATURES v v v v Adjustable output voltage Thermal overload protected Accepts either 24V AC or DC Snap track mounted APPLICATIONS v v v Power stand-alone sensors Power 4 to 20mA transmitters Power panel meters DESCRIPTION The DCPS is an adjustable DC power supply designed to convert 24V AC to a DC voltage. It offers both half-wave and full-wave bridge rectification circuits as standard features. (LVR voltage range 4.5V to 17V DC, HVR range 13V to 26V DC) ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -19- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW COMMUNICATION DEVICES ATKINSON ELECTRONICS SM2 TRUNK INTERFACE - RS-232 AETI-232 FEATURES v v v v Two Staefa SM2 TTL repeater ports Staefa’s SM2 TTL communication to RS-232 Transformer isolation onboard Small enough to mount inside a 4" sq. handy box APPLICATIONS v v Convert Staefa’s Talon Network Manager’s RS-232 to Staefa’s SM2 TTL communication format Convert Tridium’s Network Manager’s RS-232 to Staefa’s SM2 TTL communication format DESCRIPTION The AETI-232 is a TTL to RS-232 repeater/converter module that is designed to extend or expand the capacity of Staefa’s TTL communication trunks. ATKINSON ELECTRONICS SM2 TRUNK INTERFACE - RS-485 AETI-485 FEATURES v v v v Two Staefa SM2 TTL repeater ports Staefa’s SM2 TTL communication to RS-485 Transformer isolation onboard Small enough to mount inside a 4" sq. handy box APPLICATIONS v v v Extend Staefa’s SM2 TTL communication trunk Convert Staefa’s SM2 TTL communication to RS-485 communication trunk Convert Staefa’s RS-485 communication trunk to Staefa’s SM2 TTL communication trunk DESCRIPTION The AETI-485 is a TTL to RS-485 repeater/converter module that is designed to extend or expand the capacity of Staefa’s TTL communication trunks. ATKINSON ELECTRONICS SM2 TRUNK INTERFACE - FIBER OPTIC AETI-FO FEATURES v v v v v One Staefa SM2 TTL trunk I/O One Staefa NCRS RS-485 trunk I/O One Transmit/Receive fiber optic I/O Selectable distance settings for fiber transmitter Transformer isolation onboard APPLICATIONS v v Extend Staefa’s trunk communications between buildings via RS-485 or fiber optic cable Convert Staefa’s communication trunk to a fiber optic (non electrical) serial communication trunk DESCRIPTION The AETI-FO is a fiber optic repeater module. It accepts Staefa’s TTL and RS-485 communication trunks and transmits and receives on two 62.5/125mm fiber optic cables. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -20- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW COMMUNICATION DEVICES DUAL RS-485 TO FIBER OPTIC INTERFACE DRFB FEATURES v v v Two Staefa NCRS type RS-485 LAN/ trunk I/Os Two Transmit/Receive fiber optic I/Os Transformer isolation onboard APPLICATIONS v Extend Staefa’s LAN trunk between buildings via fiber optic cable DESCRIPTION The DRFB is a RS-485 to fiber optic convertor module. It is designed to extend Staefa’s NCRS RS-485 LAN connections beyond that of standard wire connection lengths. RS-485 TO FIBER OPTIC REPEATER FR485 FEATURES v v v v v v RS-485 to Multi-Mode fiber One or Two fiber optic channels 19.2 to 78+K baud rates Transparent repeater function Optical signal regeneration LED signal indication APPLICATIONS v v v v v RS-485 Bacnet or proprietary serial trunks Twisted pair to fiber optic communications Electrical noise immunity between buildings by utilizing fiber Extends network up to 2.5Km Hub or single point to fiber compatible DESCRIPTION The FR485 is a RS-485 to fiber optic convertor module available as a single fiber pair output repeater or dual fiber pair output repeater. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -21- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW LONWORKSs LONWORKSs s NETWORK FIBER OPTIC REPEATER LNFR FEATURES v v v v v LonWorkss FTT-10A Free Topology to Multi-Mode fiber Transparent repeater function LED signal indication One or two fiber optic channels Supports Ring, Bus, and Point to Point topologies APPLICATIONS v v v Twisted pair to fiber optic communications Electric noise immunity Extends network up to 2.5Km DESCRIPTION The LNFR is a twisted pair to fiber optic repeater which is transparent to the network and allows multiple free topology networks to be connected over greater distances. 24V POWER LINE TO FREE TOPOLOGY LONWORKSs ROUTER PLFT24 FEATURES v v v v v Connects twisted pair nodes to 24V AC power line system Implements standard LonWorkss router functions: configured, learning, bridge & repeater Echelons router core, PLT22 & FTT-10A transceivers LED communication indication: band in use, packet detect, near and far service pin 24V AC line -to-neutral transformer isolated coupling APPLICATIONS v Free topology to 24V AC power line communication as a configured router, bridge or repeater DESCRIPTION The PLFT24 connects LonWorkss twisted pair networks to LonWorkss power line networks operating at 24 Volts AC. RELAY CONTROL MODULE RCM4 FEATURES v v v v v v Optional: FTT-10A Free Topology Transceiver or PLT-22 Power Line Transceiver communication Four Relay outputs: 1 Amp contact or voltage switching One optically isolated digital input LED relay position indication Encapsulated for wet environments Includes input for rain or soil moisture sensor APPLICATIONS v v v Underground sprinkler valve control Network load control: valves, pumps, fans, etc. Digital outputs for remote indication DESCRIPTION The RCM4 is a single input, four relay output LON node. It can be used in applications which require remote network control of two position loads such as pumps, fans, valves, sprinkler valves. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -22- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW AUXILIARY PRODUCTS NOISE SUPPRESSION & FILTER BOARD NSFB FEATURES v v v Dual channel noise filtering Two types of noise filtration technics used: 1 DC common mode choke coils 1 EMI suppression filter capacitors EMI noise reduction on frequencies between 10KHz to 1MHz APPLICATIONS v v Noise radiated from the inputs of some VFDs Filter control signals that have picked up noise radiated from electrical or RF equipment DESCRIPTION The NSFB is a dual channel noise suppression filter board that uses passive filtration technics to filter noise coming from the input of VFDs, electrical or RF equipment. RDI SNAP TRACK SNAP TRACK STOCKED SIZES v v v v 8TK2-24 8TK-48 TK2-24 TK2-48 2.187"W x 24"L 2.187"W x 48"L 3.0"W x 24"L 3.0"W x 48"L LITTLEFUSE - 2 AG CARTRIDGE FUSE FUSE STOCKED SIZES v v v v v v v v 225.250 225.500 225.750 225 001 225 01.5 225 002 225 003 225 006 ¼ amp. ½ amp. ¾ amp. 1 amp. 1½ amp. 2 amp. 3 amp. 6 amp. Shipped 5 fuses per package ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -23- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] 2005 PRODUCT OVERVIEW AUXILIARY PRODUCTS SHORTING JUMPERS OR SHUNTS SHUNTS PART NUMBER v AMP #881545-4 .1" pin spacing Shipped 5 shunts per package 3 - 15 PSI GAUGE KIT GAUGE KIT KIT CONTAINS: v v v v DC-1401 0 TO 30 PSI gauge N4-135-1 Parker gauge tee Mounting block for Pneutronics VIP transducer 3" long ¼ tubing PNEUTRONICS 4-20MA PNEUMATIC TRANSDUCER FEATURES v v v v v VIP-F-B/420I/315PSI DISCONTINUED Non-bleed device (no air consumption in steady state) 3-15 PSI adjustable Jumper selectable analog inputs Field calibration pots Optional pressure feedback signal Unaffected by mounting position APPLICATIONS v v 4 to 20 mA to pneumatic 1 to 5V to pneumatic REPLACED BY UIPT DESCRIPTION The Pneutronics VIP-F-B/420I/315PSI is a 4 to 20mA or 1 to 5V DC to 3 to 15 PSI pneumatic transducer. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -24- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] ATKINSON ELECTRONICS, INC. PRODUCT CATALOG PRICE LIST PRICES EFFECTIVE NOVEMBER 1, 2004 LIST PRICE AD590-D AD590-P AD590-W - TEMPERATURE SENSOR W/ 8" DUCT PROBE TEMPERATURE SENSOR W/12" PIGTAILS TEMPERATURE SENSOR W/ 3" WELL 27.00 15.00 37.00 AETI-232 /TTL2 AETI-485 /TTL1 AETI-485 /TTL2 AETI-FO /TTL1/RS-485 - SM2-TTL TO TTL TO RS-232 COMMUNICATION REPEATER SM2-TTL TO RS-485 COMMUNICATION REPEATER SM2-TTL TO TTL TO RS-485 COMMUNICATION REPEATER SM2-TTL TO RS-485 TO FIBER OPTIC COMMUNICATION REPEATER ASM1 /XXX/XXX/X ASM2 /PC/XXX - ANALOG SCALING MODULE (ANY ‘S’ VERSION, CALL FOR ‘P’ VERSION) PHASE CUT TO 0 - 5V OR 0 - 10V DC CONVERTER MODULE AVR1 /PC AVR1A /SEL/X/XX AVR4A /XX-XX AVR4A /XXX/2CH AVR4A /XXX/3CH - 0 - 20V PHASE CUT INPUT TO 1 SPDT RELAY VOLTAGE/CURRENT INPUT TO 1 SPDT RELAY (ANY VERSION) DUAL SIGNAL INPUTS TO 4 SPDT RELAYS (ANY VERSION) SINGLE VDC, mA, OR PC INPUT TO 2 SPDT RELAYS SINGLE VDC, mA, OR PC INPUT TO 3 SPDT RELAYS CRM2 /XXXX/XX CRM2 /CUSTOM - SM2 STANDARD INPUT RANGE MODULES SM2 CUSTOM RANGE MODULE DCIM-FP /PCX-X - PULSED INPUTS TO PHASE CUT OUTPUT 27,40,80 WATT VERSIONS DCIM-PCD /MA/PCX-X DCIM-PCD/2MA/PCX-X DCIM-PCD /PC/PCX-X DCIM-PCD /2PC/PCX-X DCIM-PCD /PCX-AMP DCIM-PCD /135V/PCX-X - 4 - 20mA, 0 - 10V DC INPUTS TO PHASE CUT OUTPUT 27,40,80 WATT 80.00 (2) 4 - 20mA OPTO INPUTS FUNCTION., TO PHASE CUT OUT 27,40,80 WATT 124.00 10-90% PHASE CUT, 0 - 10V DC INPUTS TO PHASE CUT OUTPUT 27,40,80 WATT 80.00 (2) PHASE CUT OPTO INPUTS FUNCTION., TO PHASE CUT OUT 27,40,80 WATT 118.00 PHASE CUT AMPLIFIER MODULE 27,40,80 WATT 54.00 135 OHM INPUT TO PHASE CUT OUTPUT 27 WATT 94.00 DCIM-SC /PC-VDC/-X DCIM-SC /MA-VDC/-X DCIM-SC /135V/MA DCIM-SC /135V/VDC p u l n PHASE CUT, 0 - 10V DC INPUTS TO VOLTAGE OR 4 - 20mA OUTPUT 4 - 20mA, 0 - 10V DC INPUTS TO VOLTAGE OR 4 - 20mA OUTPUT 135 OHM INPUT TO 4 - 20mA OUTPUT 135 OHM INPUT TO VOLTAGE OUTPUT DCPS /XVR - DC POWER SUPPLY (L = 4.5V - 17VDC, H = 13.5V - 26VDC) OUTPUT 30.00 DFCM /XX DFCM /XX/ICO DPCM /XX/PWM - DUAL CHANNEL 3 PT FLOATING 24V AC OUTPUT MODULE DUAL CHANNEL 3 PT FLOATING 24V AC OUTPUT MODULE w/CHANGE-OVER DUAL CHANNEL PWM 24V AC OUTPUT MODULE 85.00 95.00 80.00 Di16CIB/X - DIGITAL 16 CHANNEL ISOLATION BOARD 100.00 DIA08 /SEL/XX DIA08 /CUSTOM - DUAL CHANNEL PRECISION SIGNAL ISOLATOR MODULE CUSTOM DUAL CHANNEL PRECISION SIGNAL ISOLATOR MODULE 155.00 CALL DIM-3 LCD +5V STD DIM-3 LCD W/PS STD DIM-3 LED +5V STD DIM-3 LED W/PS STD DIM-3 LP DIM-3 RSP LCD DIM-3 RSP LED - DIGITAL LCD METER +5VDC PWR STANDARD RANGES DIGITAL LCD METER 8-24VAC/DC PWR STANDARD RANGES DIGITAL LED METER +5VDC PWR STANDARD RANGES DIGITAL LED METER 8-24VAC/DC PWR STANDARD RANGES DIGITAL LCD METER LOOP POWERED STANDARD RANGES DIGITAL LCD METER WITH REMOTE SET-POINT POT & PLATE DIGITAL LCD METER WITH REMOTE SET-POINT POT & PLATE 125.00 140.00 155.00 170.00 125.00 175.00 205.00 DISM-D /PC1 DISM-D /PC2 DISM-D /PC/SEQ. DISM-E /CH1 DISM-E /CH2 DISM-E /SEQ-XX - SINGLE PHASE CUT TO 4 - 20mA, 0 - 10V DC ISO. MODULE W/TRANSFORMER DUAL CH. PHASE CUT TO 4 - 20mA, 0 - 10VDC ISO. MODULE W/TRANSFORMER SINGLE PHASE CUT TO SEQUENCING OUTPUTS ISO. MODULE SINGLE CH. SEL. 4 - 20mA, 0 - 10V DC I/O, ISO. MODULE W/TRANSFORMER DUAL CH. SEL. 4 - 20mA, 0 - 10V DC I/O, ISO. MODULE W/TRANSFORMER SINGLE CH. SEL. 4 - 20mA, 0 - 10V DC SEQUENCING OUTPUTS ISO. MODULE 120.00 170.00 175.00 100.00 140.00 150.00 DPRM/2 - DUAL PILOT 15 AMP RELAY MODULE 24V AC/DC COIL p u l n ITEM HAS BEEN DISCONTINUED - REPLACED BY DISM-D ITEM HAS BEEN DISCONTINUED - REPLACED BY DISM-E ITEM HAS BEEN DISCONTINUED - REPLACED BY SIA05A /OHM /XX ITEM HAS BEEN DISCONTINUED - REPLACED BY ASM1/135V/XX (ANY VERSION) 136.00 115.00 120.00 180.00 35.00 32.00 65.00 50.00 130.00 110.00 120.00 20.00 30.00 124.00 32.00 Prices are subject to change without notice. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -25- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] ATKINSON ELECTRONICS, INC. PRODUCT CATALOG PRICE LIST PRICES EFFECTIVE NOVEMBER 1, 2004 LIST PRICE DRFB /STD DRFB /SR DRFB /DR DRFB /FR - DUAL RS-485 TO FIBER OPTIC COMMUNICATION REPEATER SINGLE RS-485 TO DUAL FIBER OPTIC COMMUNICATION REPEATER DUAL RS-485 TO DUAL FIBER OPTIC COMMUNICATION REPEATER FIBER OPTIC COMMUNICATION REPEATER THREE I/O’s 320.00 300.00 400.00 325.00 DSAM /PC DSAM /VDC - DUAL CH. PHASE CUT TO 0 - 10V DC MODULE DUAL CH. 4 - 20mA, 0 - 10V DC TO 0 - 10V DC MODULE 75.00 75.00 FR485/S FR485/D - RS-485 TO FIBER OPTIC REPEATER, SINGLE FIBER OUTPUT RS-485 TO FIBER OPTIC REPEATER, DUAL FIBER OUTPUT CALL CALL FVR4 /SEL/X - FIXED 4 CH. VOLTAGE SENSITIVE RELAY-ANALOG SIGNAL 90.00 HOA-100 /XX HOA-102S /XX - 4 CH. 0 - 10V OR 0 - 15V DC HAND - OFF - AUTO BOARD 2 CH. 0 - 10V OR 0 -15V DC HAND - OFF - AUTO BOARD WITH FB. STATUS 125.00 65.00 IPS-2 /XXX IPS-2C /XXX IPS-4 /XXX IPS-4C /XXX IPS-4SB - ISOLATED DUAL DC POWER SUPPLY ISOLATED DUAL AC AND DC POWER SUPPLY ISOLATED QUAD DC POWER SUPPLY ISOLATED QUAD AC AND DC POWER SUPPLY ISOLATED DUAL AC & DC POWER SUPPLY 400MA PRI. 24 OR 120V AC PRI. 24 OR 120V AC PRI. 24 OR 120V AC PRI. 24 OR 120V AC PRI. 24 OR 120V AC 55.00 45.00 110.00 90.00 65.00 IPXFMR-2 /2/XXX IPXFMR-2 /4/XXX IPXFMR-2 /6/XXX - ISO. TRANSFORMER 2 OUTPUT 24V AC @ 250mA, ISO. TRANSFORMER 4 OUTPUT 24V AC @ 250mA, ISO. TRANSFORMER 6 OUTPUT 24V AC @ 250mA, PRI. 24 OR 120V AC PRI. 24 OR 120V AC PRI. 24 OR 120V AC 25.00 47.50 70.00 LCRM /XX - LOW CURRENT RELAY MODULE 0-10V DC INPUT (EITHER VERSION) LNFR/S LNFR/D - LONWORKS NETWORK FIBER OPTIC REPEATER, SINGLE FIBER OUTPUTS LONWORKS NETWORK FIBER OPTIC REPEATER, DUAL FIBER OUTPUTS 260.00 350.00 MASC - 4 CHANNEL CUSTOM ANALOG SIGNAL SCALER (ANY VERSION) 125.00 MCRM-1 MCRM-10 - MULTI 10 CH. SPDT 1 AMP RELAY MODULE MULTI 10 CH. SPDT 10 AMP RELAY MODULE 122.00 100.00 MRB1 - DIGITAL INTERFACE FOR STAEFA’S DCRM RELAY BOARD 45.00 NSFB - DUAL CH. NOISE SUPPRESSION FILTER BOARD 36.00 PACM / / /01 PACM / / /01S PACM / /XXX /02 PACM / /XXX/02S PACM /XXX/XXX/031 PACM /XXX/XXX/032 PACM /XXX/XXX/04 PACM /XXX/XXX/05 PACM /XXX/XXX/06 PACM / / /07 PACM /XXX/XXX/08 - PROGRAMMED ANALOG CONTROLLER MODULE (EMBEDDED CONTROLLER) 85.00 PROGRAMMED ANALOG CONTROLLER MODULE WITH SM2-SVP SENSOR 185.00 PROGRAMMED ANALOG CONTROLLER MODULE LINEARIZE SM2-SVP SENSOR 85.00 PROGRAMMED ANALOG CONTROLLER MODULE WITH SM2-SVP SENSOR 185.00 PROGRAMMED ANALOG CONTROLLER MODULE (SQUARE ROOT EXT. SINGLE) 85.00 PROGRAMMED ANALOG CONTROLLER MODULE (SQUARE ROOT EXT. DUAL) 85.00 PROGRAMMED ANALOG CONTROLLER MODULE (3 INPUT AVE. OF2) 85.00 PROGRAMMED ANALOG CONTROLLER MODULE (INDOOR AIR QUALITY) CALL PROGRAMMED ANALOG CONTROLLER MODULE (MIXED AIR CONTROL) CALL PROGRAMMED ANALOG CONTROLLER MODULE (FKV-32 TO SVP OUTPUT) 85.00 PROGRAMMED ANALOG CONTROLLER MODULE (2K NTC THERMISTOR) 100.00 PCDO /XX/PCM-XX PCDO /XX/PCM-SEQ PCDO //PCM-AMP - DUAL CHANNEL PHASE CUT OR mA TO PHASE CUT DRIVER 40 WATT (1:1 SEQ) 145.00 DUAL CHANNEL PHASE CUT OR mA TO PHASE CUT DRIVER 40 WATT (2:1 SEQ) 145.00 DUAL CHANNEL PHASE CUT TO PHASE CUT AMP 40 WATT 95.00 PDM1 - PULSE DIVISION MODULE (42 TO 4256) V DC & OPEN COLLECTOR OUTPUT PLFT24 - POWER LINE TO FREE TOPOLOGY LONWORKS ROUTER 24V PMR4/2 PMR4 - PWM TO MULTISTAGE RELAY MODULE (2 RELAYS) for DELTA BACstat II PWM TO MULTISTAGE RELAY MODULE (4 RELAYS) for DELTA BACstat II 60.00 70.00 PRM24 - PILOT 10 AMP RELAY MODULE 24V AC/DC COIL 16.80 PSIM-MASTER PSIM-SLAVE PSIM-HOC PSIM-STBD PSIM-CABLES - PHOENIX-STAEFA INTERFACE MODULE MASTER W/ PC TO 0 -10V DC PHOENIX-STAEFA INTERFACE MODULE SLAVE W/O PC TO 0 -10V DC PSIM HEATING OVERRIDE CONTROL BOARD PSIM SCREW TERMINAL BOARD PSIM CABLES FOR MASTER OR SLAVE INTERFACE BOARD 25.00 50.00 800.00 200.00 180.00 50.00 25.00 CALL Prices are subject to change without notice. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -26- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] ATKINSON ELECTRONICS, INC. PRODUCT CATALOG PRICE LIST PRICES EFFECTIVE NOVEMBER 1, 2004 LIST PRICE RCM4/FTT RCM4/PLT - RELAY CONTROL MODULE, FREE TOPOLOGY TRANSCEIVER RELAY CONTROL MODULE, POWER LINE TRANSCEIVER RH-LCD /XX/XXX - DIGITAL DISPLAY (STAEFA HOUSING) VDC/mA SIGNALS 82.00 ROSM/X - DOOR ACTUATED ROOM OFFSET SWITCHING MODULE 60.00 RS-DCP /XXX RS-LCD RSC-RS-1000D - RM SENSOR WITH DUAL SENSOR & COM PORTS (T-30, T-1, AD590) RM SENSOR SEE RSC-RS BELOW OR SM2-RS, SMVU-RS, ON NEXT PAGE RM SENSOR WITH DIGITAL DISPLAY (for Staefa RS Controller T-1 sensor) 118.00 S1PI /STD S1PI /VDC-MA/XX - SMART 1 PROPORTIONAL PHASE CUT DRIVER 16W 0 - 10V DC OR 4 - 20mA TO PHASE CUT DRIVER 16, 27, 40, 80 WATTS 109.00 100.00 SBM - SIGNAL BUFFER MODULE (1 TO 4 CH) 35.00 SIA02K /XXX/XXX - VOLTAGE OR CURRENT TO KLIMO SENSOR VOLTAGE OUTPUT 84.00 SIA03A /PC/MA SIA03A /2XX/MA SIA03A /CUSTOM - 10-90% PHASE CUT, TO 4 - 20mA OUTPUT MODULE TWO INPUT, H.L.S.A. FUNCTION, TO 4 - 20mA OUTPUT MODULE CUSTOM SIA03A MODULE 120.00 120.00 CALL SIA05A /STD-15 SIA05A /STD-30 SIA05A /OHM SIA05A /CUSTOM - 3 TO 15 PSI INPUT TO VOLTAGE AND 4 - 20mA OUTPUT 3 TO 30 PSI INPUT TO VOLTAGE AND 4 - 20mA OUTPUT 2 OR 3 WIRE RESISTANCE TO 4 - 20mA & VDC OUTPUT CUSTOM INPUT TO CUSTOM OR STANDARD OUTPUT 100.00 100.00 70.00 CALL SIA07A ///X/XXX/VDC/X SIA07A ///X/XXX/MA /X SIA07A /CUSTOM - 2 TO 6 INPUTS, VOLTAGE OUTPUT, ANY FUNCTION CODE 2 TO 6 INPUTS, 4 - 20mA OUTPUT, ANY FUNCTION CODE 2 TO 6 CUSTOM INPUTS, VOLTAGE OR mA OUTPUT, ANY FUNCTION CODE 99.00 114.00 CALL SIA08 /SEL/5V SIA08 /SEL/10V SIA08 /CUSTOM - SELECTABLE INPUT TRANSFORMER ISO. 0 - 5V, 4 - 20mA OUTPUT SELECTABLE INPUT TRANSFORMER ISO. 0 - 10V, 4 - 20mA OUTPUT CUSTOM INPUT OR OUTPUT RANGES TRANSFORMER ISOLATED 110.00 110.00 CALL SM2-RS-1000D SM2-RS-1010D SM2-RS-1101D SM2-RS-1111D - T-30 RM SENSOR WITH DIGITAL DISPLAY T-30 RM SENSOR WITH OVERRIDE & DIGITAL DISPLAY T-30 RM SENSOR WITH SETPOINT & DIGITAL DISPLAY T-30 RM SENSOR WITH OVERRIDE, SETPOINT & DIGITAL DISPLAY 82.00 84.50 92.50 95.00 SM2-RS-2101D - T-30 RM SENSOR DDC VERSION WITH SETPOINT & DIGITAL DISPLAY 95.00 SMVU-RS-1000D SMVU-RS-1010D SMVU-RS-1101D SMVU-RS-1111D - T-1 T-1 T-1 T-1 SMVD SMVD SMVD SMVD SMVD SMVD SMVD SMVD SMVD SMVD - PHASE CUT AMPLIFIER MODULE 40, 80 WATTS PHASE CUT AMPLIFIER MODULE 120 WATTS PHASE CUT, MA, VOLTAGE INPUT TO 6 TO 18V PC OUTPUT 40, 80 WATTS PHASE CUT, MA, VOLTAGE INPUT TO 6 TO 18V PC OUTPUT 120 WATTS UNI INPUT W/SEQUENCING OPT. TO 6 TO 18V PC OUTPUT 40,80 WATTS UNI INPUT W/SEQUENCING OPT. TO 6 TO 18V PC OUTPUT 120 WATTS ISO. 4 TO 20mA INPUT TO 6 TO 18V PC OUTPUT 40, 80 WATTS ISO. 4 TO 20mA INPUT TO 6 TO 18V PC OUTPUT 120 WATTS ISO. 4 TO 20mA INPUT W/SEQUENCING TO 6 TO 18V PC OUTPUT 40, 80W ISO. 4 TO 20mA INPUT W/SEQUENCING TO 6 TO 18V PC OUTPUT 120W SORM SSRM - SIGNAL OVERRIDE MODULE START STOP RELAY MODULE UIPCM /AC UIPCM /DC UIPCM /CUSTOM - UNI INPUT TO PWM OR 3 PT FLOATING 24 VAC OUTPUT UNI INPUT TO PWM OR 3 PT FLOATING OPEN COLLECTOR DC OUTPUT UNI INPUT TO PWM OR 3 PT FLOATING CUSTOM 105.00 100.00 CALL UIPT /M/STD UIPT /B/STD UIPT /X/FBX - UNI INPUT PNEUMATIC TRANSDUCER (MAINTAINED) UNI INPUT PNEUMATIC TRANSDUCER (BLEED) UNI INPUT PNEUMATIC TRANSDUCER WITH FEEDBACK 135.00 140.00 150.00 /AMP/XX W /AMP/120W /UNI/XX W /UNI/120W /SEQ/XX W /SEQ/120W /MAI/XX W /MAI/120W /MIS/XX W /MIS/120W RM SENSOR WITH DIGITAL DISPLAY RM SENSOR WITH OVERRIDE & DIGITAL DISPLAY RM SENSOR WITH SETPOINT & DIGITAL DISPLAY RM SENSOR WITH OVERRIDE, SETPOINT & DIGITAL DISPLAY 250.00 325.00 93.00 93.00 95.50 103.50 105.00 64.00 78.00 96.00 110.00 96.00 110.00 100.00 114.00 100.00 114.00 35.00 43.00 Prices are subject to change without notice. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -27- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] ATKINSON ELECTRONICS, INC. PRODUCT CATALOG PRICES EFFECTIVE NOVEMBER 1, 2004 PRICE LIST LIST PRICE UIRO /STD UIRO /STD-ADJ. UIRO /CUSTOM UIRO /CUSTOM-ADJ UIRO_RM /STD UIRO_RM /CUSTOM - UNI INPUT TO 3 WIRE POTENTIOMETER STD OUTPUT UNI INPUT TO 3 WIRE POTENTIOMETER STD OUTPUT ADJUSTABLE BASE UNI INPUT TO 3 WIRE POTENTIOMETER CUSTOM OUTPUT UNI INPUT TO 3 WIRE POTENTIOMETER CUSTOM OUTPUT ADJUSTABLE UIRO RESISTANCE MODULE STANDARD RESISTANCE OUTPUT UIRO RESISTANCE MODULE CUSTOM RESISTANCE OUTPUT UMATR /AD590 UMATR /RTD UMATR /VDC UMATR /XXXX - 4 - 20mA TRANSMITTER W/ AD590 SENSOR 4 - 20mA TRANSMITTER SET-UP FOR 100V RTD SENSOR 4 - 20mA TRANSMITTER VOLTAGE INPUT DUCT OR WELL HOUSING FOR UMATR & SENSOR 65.00 65.00 65.00 15.00 UPAC UPAC UPAC UPAC - FLT OR PWM TO 4 - 20mA AND 0-10V DC CONVERTER FLT OR PWM TO ADJUSTABLE VOLTAGE 0 - 5V TO 0 - 15V DC PULSE COUNTER TO 4-20mA AND 0-10V DC OR 0-5V DC CUSTOM PULSE INPUT TO ANALOG CONVERTER 85.00 85.00 90.00 CALL VMAC/S VMAC/P - VOLTAGE TO MA CONVERTER (SNAP TRACK MOUNTING) VOLTAGE TO MA CONVERTER (POTTED - DOUBLE STICK TAPE MOUNTING) 38.00 45.00 VPM1 - VOLTAGE TO PWM MODULE FOR “GE” MODULATING MOTOR 58.00 VRDC VRDC/48V - ADJ. DC VOLT. RELAY w/ TIME DELAY (NON-ENCAPSULATED, PS 24V AC) VRDC WITH 60.4KV RESISTOR FOR 0-60V DC OPERATION 55.00 55.00 VRWM VRWM VRWM VRWM - VANDAL RESISTANT SENSOR W/ STAEFA'S F-T30 VANDAL RESISTANT SENSOR W/ TWO (2) STAEFA'S F-T30 VANDAL RESISTANT SENSOR W/ STAEFA'S T-1 VANDAL RESISTANT SENSOR W/ AD590 - WIRE ADDER MODULE 2/4 FUSE /225.250 FUSE /225.500 FUSE /225.750 FUSE /225 001 FUSE /225 01.5 FUSE /225 002 FUSE /225 003 FUSE /225 006 - LITTELFUSE .25 AMP. 2AG SERIES LITTELFUSE .50 AMP. 2AG SERIES LITTELFUSE .75 AMP. 2AG SERIES LITTELFUSE 1 AMP. 2AG SERIES LITTELFUSE 1.5 AMP. 2AG SERIES LITTELFUSE 2 AMP. 2AG SERIES LITTELFUSE 3 AMP. 2AG SERIES LITTELFUSE 6 AMP. 2AG SERIES SNAP /8TK2-24 SNAP /8TK2-48 SNAP /TK2-24 SNAP /TK2-48 - RDI SNAP TRACK 2.19" WIDE X 24" LONG RDI SNAP TRACK 2.19" WIDE X 48" LONG RDI SNAP TRACK 3.0" WIDE X 24" LONG RDI SNAP TRACK 3.0" WIDE X 48" LONG 5.50 9.50 5.50 9.50 SHUNTS - .1" - AMP # 881545 JUMPER W/ HANDLE 2.50 GAUGE SET - 0 TO 30PSI GAUGE SET VIP-F-B/4-20I/3-15PSI - 4 TO 20MA INPUT TO 3 TO 15 PSI OUTPUT TRANSDUCER /STD /ADJ /CNT /CUSTOM /F-T30 /(2)F-T30 /T-1 /AD590 WAM2/4 160.00 170.00 CALL CALL 30.00 40.00 66.00 110.00 66.00 36.00 58.00 AUXILIARY PRODUCTS (PACKAGE OF 5) (PACKAGE OF 5) (PACKAGE OF 5) (PACKAGE OF 5) (PACKAGE OF 5) (PACKAGE OF 5) (PACKAGE OF 5) (PACKAGE OF 5) (PACKAGE OF 5) 2.50 2.50 2.50 2.50 2.50 2.50 2.50 2.50 15.00 Prices are subject to change without notice. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -28- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] TERMS AND CONDITIONS PRODUCT CATALOG Atkinson Electronics, Inc. sells its products under the following terms and conditions. Any additional or different terms must be specifically agreed to, in writing, prior to any sale. Terms are subject to change and current terms in effect at the time of sale will apply. ORDERING To place an order, contact Atkinson Electronics, Inc. and ask for a Customer Service Engineer in the Circuit Board Division. The minimum order amount is One Hundred Dollars ($100.00) list price. All telephone orders should be confirmed in writing prior to shipment with a mailed or faxed written confirming order including your contact at Atkinson Electronics. Mark your confirming document "CONFIRMING ORDER, DO NOT DUPLICATE". This procedure is necessary to make sure that our products meet your requirements. WRITTEN OR FAXED ORDERS Send your order to the attention of "Circuit Board Division Order Entry." Please include the following on your order: v v v v v v Purchase Order Number Bill and Ship To Addresses Quantity, Part Number, Description of Parts Ordered and Calibration Specifications (if any) Specify method of Shipment, FEDEX EC. (2 day), FEDEX STD. (Next afternoon), FEDEX PR. (Next morning), UPS, etc. Requested Ship Date and/or Required Delivery Date Buyers Name, Telephone and Fax Number Upon receipt we will fax to you a confirmation of your order, pricing and estimated ship date and an assigned Sales Order Number. Please refer to this number in all further communications regarding this order. INTERNATIONAL ORDERS International shipments are subject to additional handling, export documentation and shipping charges, as well as any appropriate duties, taxes or fees. If you deal with a Customs Broker, please provide us with the broker's name, address, telephone number, and a copy of their import documents so we may process your order quickly. Terms for payment are prepaid in US dollars by Electronic Funds Transfer to our bank or a bank check in US dollars. SCHEDULED ORDERS We encourage blanket purchase orders with scheduled releases. We request each release be shipped to a single destination and releases be confirmed 90 days in advance of scheduled delivery. If delivery is not taken on the quantities ordered, the Customer will be invoiced for the difference in price between the quantities ordered and the quantities accepted, if any, based on the discount schedule in effect on the date that the original order was placed. DELIVERY Promises of delivery from stock are subject to prior sale. Delivery dates are not guaranteed, but are estimated on the basis of our immediate receipt of all needed information supplied by the Customer. We will, in good faith, attempt to meet estimated delivery dates, but we do not accept responsibility for delays resulting from circumstances beyond our reasonable control. Atkinson Electronics, Inc. is relieved of all risks of loss or damage of goods upon our delivery of goods to the carrier. EXPEDITING Normal delivery runs 5 days to 10 days. If an order requires expediting, please discuss your needs with Customer Service, as we will do our best to meet your requirements at minimal additional costs. There is a minimum expedite charge of $25.00 or 10% of total order, whichever is greater, (plus shipping cost) for orders expedited from factory stock. Expedite charges may vary based upon your requirements. In order to keep expedite charges at a minimum, give us as much information and advance warning as possible. We may have to adjust another customer's order, reschedule production or use other outside services to meet your expediting needs. SHIPMENTS We ship by FEDEX Economy (2 day) whenever possible unless another qualified carrier is requested. FEDEX Standard (Next afternoon), FEDEX Priority (Next morning), or other arrangements are optional. All shipments are F.O.B. Salt Lake City, Utah and shipping and handling charges are at prevailing rates. Orders received after 1:00 P.M. (Salt Lake City) will be processed on the next business day. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -29- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] TERMS AND CONDITIONS PRODUCT CATALOG BACK ORDERS In the event that an order cannot be completely filled, the balance of the order will be back ordered and will be shipped as soon as possible. If you want the entire order shipped at one time, specify "SHIP COMPLETE". CLAIMS Any discrepancies in shipments must be brought to the attention of our Customer Service Representatives within ten (10) working days of receipt of shipment. Deductions from remittances will not be allowed unless authorized by Atkinson Electronics, Inc. in writing. PAYMENT TERMS Payment terms are C.O.D. or prepaid unless an open account is established. OPEN ACCOUNTS We offer terms of Net 30 days to all Customers who have established an open account with Atkinson Electronics, Inc. To establish an open account, please contact the credit department and complete an application and forward it to Atkinson Electronics, Inc., ATTN: CREDIT MANAGER. It generally takes two to three days to process your account once the credit application is received. v v v v The invoice number MUST appear on your check stub to insure proper credit to your account! An additional 1.5% per month service charge will be added to any account balance aging over 30 days. Accounts with past due balances beyond 60 days will be placed on credit hold. It is our policy not to ship to any account that is past due. In the event that it becomes necessary for Atkinson Electronics, Inc. to take legal action to enforce the provisions of this agreement or to obtain redress for the breach of any provision hereof, the buyer shall pay the costs of such action, including reasonable attorney fees. All legal proceedings that are in anyway related to this agreement shall be conducted in a court of competent jurisdiction in Salt Lake County, Utah. PRICES The price of goods sold are those in effect at the time of sale. All prices are subject to change without notice and exclude any taxes, shipping and handling charges. Please contact Customer Service for current pricing. We will be pleased to furnish written quotations either by mail or facsimile upon request. Quoted prices and conditions are valid for 30 days from the date of the written confirmation of the quote, unless otherwise specified. QUANTITY DISCOUNTS Resale discounts will be extended to account-holding customers who are involved in the manufacture or resale of electronic control products. Quantity discounts apply to each specific item or product part number. Product part numbers with separate input or output specifications count as separate items for quantity pricing unless specifically noted in a price quote. The discount structure is as follows: v v v v v Quantity of 1 to 4 pieces 25% off the list price Quantity of 5 to 9 pieces 27.5% off the list price Quantity of 10 to 24 pieces 30% off the list price Quantity of 25 to 49 pieces 32.5% off the list price For Quantities of 50 or more call for a price quote Retail discounts will be extended to Industrial, Commercial, and Institutional account-holding customers who are involved in installation or maintenance of their own electronic control systems. Quantity discounts apply to each specific item or product part number. Product part numbers with separate input or output specifications count as separate items for quantity pricing unless specifically noted in a price quote. The discount structure is as follows: v v v v v Quantity of 1 to 4 pieces list Quantity of 5 to 9 pieces 5% off the list price Quantity of 10 to 24 pieces 10% off the list price Quantity of 25 to 49 pieces 15% off the list price For Quantities of 50 or more call for a price quote ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -30- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] TERMS AND CONDITIONS PRODUCT CATALOG TAXES All applicable and required taxes, duties and governmental fees are additional charges which will be added to the selling price. Utah customers must furnish an appropriate resale exemption certificate or sales tax will be added to the invoice prior to shipment. RETURNS YOU MUST call customer service for an RMA # before returning any product to the factory. Shipments to the factory not covered by a valid RMA number are subject to refusal of delivery. The RMA number should be marked on the outside of the return package as "ATTN: Customer Service, RMA # ". To avoid delays, please include the following information inside the package: v v v v v v Returned Merchandise Authorization (RMA) Number Customer Order Number and Invoice Number Returnee's name, address and telephone number Product model number and date purchased Reason for return Additional/repair instructions Preship Warranty Replacements (PWR) are made only if we are supplied with the sales order number or invoice number of the original device. Atkinson Electronics, Inc. will pay FEDEX Economy charges on the Preship Warranty Replacement. If the defective units are not covered by our warranty, or if the defect is due to miss-use or improper installation, the customer will be billed for both the Preship Warranty Replacement at 75% of list price and the freight. All returns must be shipped prepaid to the factory. Customers will be billed for any Preship Warranty Replacements if the defective units are not returned to the factory within 30 days. RETURNS FOR CREDIT Only new and unused products may be returned for credit. Atkinson Electronics, Inc. inspects, retests and repackages ALL products returned for credit. All returns for credit are subject to a retest and restock charge (25% of purchase price but no less than $25.00). Products that are customized for specialty applications are not usually resalable items and for this reason credit will not normally be given if these products are returned. Debit memos will not be accepted without written authorization and an RMA number. After the return for credit is processed, the proper credit will be issued. No cash refunds will be issued unless requested in writing. RETURNS OF NON-WARRANTED PRODUCTS An appropriate charge (25% of Atkinson's published product price list) will be made for testing, repairs, replacement and shipping for returned products which are not defective or found to be defective as the result of improper use, maintenance or neglect. DESIGN AND SPECIFICATIONS Atkinson Electronics, Inc. reserves the right to make changes in the design and/or specifications of any product as technological advances or necessity requires. CUSTOM PRODUCT In many cases, our products can be calibrated to your custom requirements or slight modifications can be made to meet your specifications. Usually the additional charges and lead times are nominal, if any. If a custom product is to be returned, please note that products that are customized for specialty applications are usually not resalable items. For this reason, credit will not normally be given. Contact your Customer Service Representatives for quotes on your special requirements. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -31- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] TERMS AND CONDITIONS PRODUCT CATALOG LIMITED WARRANTY Atkinson Electronics, Inc. gives this express warranty (along with extended warranty endorsements, where applicable) in lieu of all other warranties, express or implied, including (without limitation), warranties of merchantability and fitness for a particular purpose. This constitutes Atkinson Electronics, Inc.'s sole warranty and obligation with regard to our products as well as the Customer's sole remedy. Atkinson Electronics, Inc. expressly disclaims all liability and responsibility for any special, indirect or consequential damages or any further loss of any kind whatsoever resulting from the use of our product. The Customer's sole and exclusive remedy and the limit of Atkinson Electronics, Inc.'s liability for any loss whatsoever, shall not exceed the purchase price paid by the Customer for the product to which a claim is made. Countries or States that do not allow limitations of incidental or consequential damages or on how long an implied warranty lasts, the above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from State to State or Country to Country. All products manufactured by Atkinson Electronics, Inc. are warranted to be free from defects in material and workmanship in accordance with and subject to the following terms and conditions: 1. This warranty is limited to the original customer only. It cannot be transferred or assigned to third parties unless the intent to transfer to a third party is expressly indicated in a purchase order and/or warranty processing arrangements have been agreed upon in writing by Atkinson Electronics, Inc. 2. Atkinson Electronics, Inc. will correct any defects in material or workmanship which appear within one (1) year from the date of shipment by Atkinson Electronics, Inc. (or its authorized distributors) to the original Customer. Atkinson Electronics, Inc. will repair or replace, at our option, any defective products, provided that our inspection discloses that such defects developed under normal and proper use. This warranty does not extend to goods subjected to misuse, neglect, accident or improper installation, or to maintenance or repair of products which have been altered or repaired by anyone except Atkinson Electronics, Inc., unless otherwise stated in writing. 3. An appropriate charge (25% of product list price) will be made for testing, repairs, replacement and shipping for a returned product which is not defective or found to be defective as the result of improper use, maintenance or neglect. 4. Atkinson Electronics, Inc. will not accept responsibility for any invoiced goods or services that are not covered by an Atkinson Electronics, Inc. written purchase order. Under no circumstances does Atkinson Electronics, Inc. agree to pay for labor or other related expenses associated with the troubleshooting and/or repair of our product without prior specific written authorization. 5. Information in our descriptive literature is based on product specifications that are current at the time of publication. Product specifications, design and descriptive literature are subject to change as improvements are introduced. Although we announce changes as they occur, we cannot guarantee notification to every Customer. Atkinson Electronics, Inc. warrants delivered products to conform to the most current specifications, design and descriptive literature. This warranty policy may be expanded or limited, for particular categories of products or Customers, by information sheets published as deemed appropriate by Atkinson Electronics, Inc. ATKINSON ELECTRONICS, INC. 14 West Vine Street, Murray, UT 84107 www.atkinsonelectronics.com -32- Phone (801) 262-6400, 1-800-261-3602 Fax (801) 261-3796 E-MAIL: [email protected] ATKINSON ELECTRONICS, INC. The leader in custom HVAC interfacing products for twenty years Providing unique solutions for the HVAC control interface problems of today & tomorrow Atkinson Electronics, Inc. (AEI) was founded in 1976 by Gaylen V. Atkinson as one of the first custom interface manufacturers. In 1976 AEI focused on custom interface boards for solar instrumentation and control. In 1980 AEI expanded its focus to include HVAC controls and became a control systems distributor. Increased emphasis was given to manufacturing and sales of electronic interface boards in 1984. The same year, our first product catalog was developed and mailed to control contractors around the country. The construction of our Murray, Utah facility which quadrupled manufacturing, engineering and office space was completed in 1991. As both a HVAC control systems distributor and electronic interface manufacturer, AEI has provided unique solutions for the electronic interface problems in the HVAC industry. AEI remains the leader in design, engineering, and manufacturing of control interface devices. Throughout our existence, our commitment has remained the same... ...to provide our customers with innovative solutions to their control system problems.