Preview only show first 10 pages with watermark. For full document please download

Product Specifications

   EMBED


Share

Transcript

Product Specifications RYVV RYVV--65B 65B--R4 8-port sector antenna, 2x 694–960, 2x 1427-1518 and 4x 1695–2690 MHz, 65° HPBW, 4x RET l Includes 2-Ports which support operation over 1427-1518 MHz (including 1400 MHz “L-Band” applications in Europe) l All Internal RET actuators are connected in “Cascaded SRET” configuration l Uses the 4.3-10 connector which is 40 percent smaller than the 7-16 DIN connector Electrical Specifications Frequency Band, MHz Gain, dBi Beamwidth, Horizontal, degrees Beamwidth, Vertical, degrees Beam Tilt, degrees USLS (First Lobe), dB Front-to-Back Ratio at 180°, dB Isolation, dB Isolation, Intersystem, dB VSWR | Return Loss, dB PIM, 3rd Order, 2 x 20 W, dBc Input Power per Port, maximum, watts Polarization Impedance 694– 790 15.1 67 11.8 2–14 16 31 28 30 790– 890 15.7 65 10.6 2–14 17 33 28 30 890– 960 15.9 63 9.8 2–14 16 34 28 30 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1427– 1518 16.0 66 7.0 2–12 17 31 28 28 1695– 1920 17.7 60 5.5 2–12 16 31 28 30 1920– 2180 18.5 60 5.0 2–12 17 36 28 30 2300– 2500 18.8 62 4.4 2–12 17 35 28 30 2500– 2690 18.5 63 4.1 2–12 16 31 28 30 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 1.5 | 14.0 -150 -150 -150 -150 -150 -150 -150 -150 350 350 350 300 300 300 250 250 ±45° 50 ohm ±45° 50 ohm ±45° 50 ohm ±45° 50 ohm ±45° 50 ohm ±45° 50 ohm ±45° 50 ohm ±45° 50 ohm Electrical Specifications, BASTA* Frequency Band, MHz Gain by all Beam Tilts, average, dBi Gain by all Beam Tilts Tolerance, dB Gain by Beam Tilt, average, dBi Beamwidth, Horizontal Tolerance, degrees Beamwidth, Vertical Tolerance, degrees USLS, beampeak to 20° above beampeak, dB Front-to-Back Total Power at 180° ± 30°, dB CPR at Boresight, dB CPR at Sector, dB 694–790 790–890 890–960 1427– 1518 1695– 1920 1920– 2180 2300– 2500 2500– 2690 14.9 15.5 15.7 15.8 17.3 18.1 18.5 18.2 ±0.3 ±0.4 ±0.4 ±0.4 ±0.7 ±0.6 ±0.5 ±0.4 2 ° | 14.9 2 ° | 15.5 2 ° | 15.8 2 ° | 15.8 2 ° | 17.1 2 ° | 17.9 2 ° | 18.3 2 ° | 18.1 8 ° | 14.9 8 ° | 15.6 8 ° | 15.8 7 ° | 15.9 7 ° | 17.3 7 ° | 18.2 7 ° | 18.6 7 ° | 18.3 14 ° | 14.7 14 ° | 15.2 14 ° | 15.3 12 ° | 15.8 12 ° | 17.2 12 ° | 18.0 12 ° | 18.3 12 ° | 17.8 ±1.2 ±1.8 ±1.8 ±4.3 ±3.4 ±2.5 ±4.4 ±4.9 ±0.8 ±0.7 ±0.6 ±0.4 ±0.4 ±0.3 ±0.2 ±0.2 16 17 16 17 15 16 16 15 25 24 24 24 27 27 28 26 20 11 21 10 21 11 15 6 19 10 22 7 21 7 20 5 * CommScope® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA, download the whitepaper Time to Raise the Bar on BSAs. Array Layout ©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: September 5, 2017 page 1 of 5 September 30, 2017 Product Specifications RYVV RYVV--65B 65B--R4 General Specifications Operating Frequency Band 1427 – 1518 MHz Antenna Type Sector Band Multiband Performance Note Outdoor usage Total Input Power, maximum 800 W @ 50 °C | 1695 – 2690 MHz | 694 – 960 MHz Mechanical Specifications RF Connector Quantity, total 8 RF Connector Quantity, low band 2 RF Connector Quantity, high band 6 RF Connector Interface 4.3-10 Female ©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: September 5, 2017 page 2 of 5 September 30, 2017 Product Specifications RYVV RYVV--65B 65B--R4 Grounding Type RF connector inner conductor and body grounded to reflector and mounting bracket Radome Material Fiberglass, UV resistant Reflector Material Aluminum RF Connector Location Bottom Wind Loading, frontal 746.0 N @ 150 km/h 167.7 lbf @ 150 km/h Wind Speed, maximum 241 km/h | 150 mph Dimensions Length 1828.0 mm | Width 350.0 mm Depth 208.0 mm | 8.2 in Net Weight, without mounting kit 25.0 kg | | 72.0 in 13.8 in 55.1 lb Remote Electrical Tilt (RET) Information Input Voltage 10–30 Vdc Internal RET High band (3) Power Consumption, idle state, maximum 2W | Low band (1) Power Consumption, normal conditions, maximum 13 W Protocol 3GPP/AISG 2.0 (Single RET) RET Interface 8-pin DIN Female RET Interface, quantity 1 female | | 8-pin DIN Male 1 male Packed Dimensions Length 1975.0 mm Width 456.0 mm | 18.0 in Depth 357.0 mm | 14.1 in Shipping Weight 38.5 kg 84.9 lb | | 77.8 in Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 11364-2006 ISO 9001:2008 Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system Included Products BSAMNT-3 — Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. ©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: September 5, 2017 page 3 of 5 September 30, 2017 Product Specifications RYVV RYVV--65B 65B--R4 * Footnotes Performance Note Severe environmental conditions may degrade optimum performance ©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: September 5, 2017 page 4 of 5 September 30, 2017 Product Specifications BSAMNT BSAMNT--3 Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set. General Specifications Application Outdoor Includes Brackets Package Quantity 1 | Hardware Mechanical Specifications Color Silver Material Type Galvanized steel Dimensions Compatible Diameter, maximum 115.0 mm | 4.5 in Compatible Diameter, minimum 60.0 mm | 2.4 in Net Weight 6.2 kg | 13.7 lb Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 11364-2006 ISO 9001:2008 Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system ©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 7, 2017 page 5 of 5 September 30, 2017