Transcript
Product Specifications E11F05P83
OneBase™ Twin Diplexer, DCS 1800/UMTS 2100, AISG compatible, dc pass on DCS port
General Specifications Product Type
Diplexer
Product Family
CBC1821
Modularity
2Twin
Includes
Mounting hardware
Electrical Specifications Submodule
1 | 2
1 | 2
Branch
1
2
Port Designation
PORT 2 17101880
PORT 1 19202170
License Band
DCS 1800
IMT 2100
Frequency Range
1710–1880 MHz
1920–2170 MHz
Insertion Loss, maximum
0.40 dB
0.50 dB
Insertion Loss, typical
0.15 dB
0.25 dB
Return Loss, minimum
18 dB
18 dB
Electrical Specifications, Band Pass
Return Loss, typical
20 dB
Isolation, minimum
50 dB
50 dB
Input Power, RMS, maximum
250 W
250 W
3rd Order PIM, maximum
110 dBm
110 dBm
3rd Order PIM, typical
117 dBm
117 dBm
3rd Order PIM Test Method
Two +43 dBm carriers
Two +43 dBm carriers
dc Power/Alarm Electrical Specifications dc/AISG Passthrough, combiner
Branch 1
dc/AISG Passthrough, demultiplexer Branch 1 Lightning Surge Current
3 kA
Lightning Surge Current Waveform
10/350 waveform
©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 16, 2016
page 1 of 4 February 14, 2016
Product Specifications E11F05P83
Block Diagram
Mechanical Specifications RF Connector Interface
716 DIN Female
RF Connector Interface Body Style
Long neck
Color
Gray
Mount Type
Pole
Mounting Pipe Diameter
40–160 mm
Mounting Pipe Hardware
Band clamps (2)
|
Wall
Dimensions Height
149.0 mm | 5.9 in
Width
145.0 mm | 5.7 in
Depth
117.0 mm | 4.6 in
Volume
2.5 L
©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 16, 2016
page 2 of 4 February 14, 2016
Product Specifications E11F05P83
Weight
3.5 kg
|
7.7 lb
Environmental Specifications Operating Temperature
40 °C to +60 °C (40 °F to +140 °F)
Ingress Protection Test Method
IEC 60529:2001, IP67
©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 16, 2016
page 3 of 4 February 14, 2016
Product Specifications E11F05P83
Outline Drawing
Regulatory Compliance/Certifications Agency ISO 9001:2008
Classification Designed, manufactured and/or distributed under this quality management system
©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 16, 2016
page 4 of 4 February 14, 2016