Transcript
Product Specifications CVVPX306M1
Multiband Antenna, 790–960 and 2x 1710–2690 MHz, 65° horizontal beamwidth, manual electrical tilt (not upgradeable)
OBSOLETE
This product was discontinued on: December 31, 2016 Replaced By RVV65A-M RVV65A-3X2
6-port sector antenna, 2x 694–960 and 4x 1695–2690 MHz, 65° HPBW, RET compatible
Electrical Specifications Frequency Band, MHz Gain, dBi Beamwidth, Horizontal, degrees Beamwidth, Vertical, degrees Beam Tilt, degrees USLS (First Lobe), dB Front-to-Back Ratio at 180°, dB CPR at Boresight, dB CPR at Sector, dB Isolation, dB Isolation, Intersystem, dB VSWR | Return Loss, dB PIM, 3rd Order, 2 x 20 W, dBc Input Power per Port, maximum, watts Polarization Impedance
790–890 14.5 60 14.8 0–10 18 25 19 5 25 30
890–960 14.8 60 13.7 0–10 18 25 20 5 25 30
1710–1920 14.5 67 13.6 0–10 18 25 26 11 25 30
1920–2180 15.2 63 12.0 0–10 18 25 23 6 25 30
2300–2690 16.2 58 9.8 0–10 18 25 15 6 25 30
1.43 | 15.0
1.43 | 15.0
1.5 | 14.0
1.5 | 14.0
1.5 | 14.0
-150 300 ±45° 50 ohm
-150 300 ±45° 50 ohm
-150 250 ±45° 50 ohm
-150 250 ±45° 50 ohm
-150 250 ±45° 50 ohm
Electrical Specifications, BASTA* Frequency Band, MHz Gain by all Beam Tilts, average, dBi Gain by all Beam Tilts Tolerance, dB Gain by Beam Tilt, average, dBi
790–890 14.4 ±0.4
890–960 14.7 ±0.2
0 ° | 14.4
0 ° | 14.8
1710–1920 14.1 ±0.5 0 ° | 14.1
1920–2180 14.9 ±0.5 0 ° | 14.9
2300–2690 15.5 ±0.6 0 ° | 15.7
5 ° | 14.4
5 ° | 14.7
5 ° | 14.1
5 ° | 14.9
5 ° | 15.5
10 ° | 14.3
10 ° | 14.6
10 ° | 14.1
10 ° | 14.8
10 ° | 15.2
±1.4 ±0.7 18 26 19 5
±1.7 ±0.4 18 26 20 5
±5.5 ±1 18 24 26 11
±3.5 ±1 18 26 23 6
±5 ±0.9 17 26 15 6
Beamwidth, Horizontal Tolerance, degrees Beamwidth, Vertical Tolerance, degrees USLS, beampeak to 20° above beampeak, dB Front-to-Back Total Power at 180° ± 30°, dB CPR at Boresight, dB CPR at Sector, dB
* CommScope® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA, download the whitepaper Time to Raise the Bar on BSAs.
General Specifications Operating Frequency Band
1710 – 2690 MHz
|
790 – 960 MHz
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 7, 2017
page 1 of 4 September 18, 2017
Product Specifications CVVPX306M1 Antenna Type
Sector
Band
Multiband
Performance Note
Outdoor usage
Mechanical Specifications RF Connector Quantity, total
6
RF Connector Quantity, low band 2 RF Connector Quantity, high band 4 RF Connector Interface
7-16 DIN Female
Grounding Type
RF connector inner conductor and body grounded to reflector and mounting bracket
Radome Material
ASA, UV stabilized
Reflector Material
Aluminum
RF Connector Location
Bottom
Wind Loading, maximum
820.0 N @ 160 km/h 184.3 lbf @ 160 km/h
Wind Speed, maximum
250 km/h
|
155 mph
Dimensions Length
1560.0 mm
Width
353.0 mm
Depth
209.0 mm | 8.2 in
Net Weight, without mounting kit 20.0 kg
|
| |
61.4 in 13.9 in
44.1 lb
Packed Dimensions Length
1745.0 mm
Width
420.0 mm
|
16.5 in
Depth
320.0 mm
|
12.6 in
Shipping Weight
25.0 kg
55.1 lb
|
|
68.7 in
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 11364-2006 ISO 9001:2008
Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system
Included Products T-041-GL-E — Adjustable Tilt Pipe Mounting Kit for 2.0"-4.5" (50-115mm) OD round members for panel antennas. Includes 2 clamp sets.
* Footnotes ©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 7, 2017
page 2 of 4 September 18, 2017
Product Specifications CVVPX306M1
Performance Note
Severe environmental conditions may degrade optimum performance
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 7, 2017
page 3 of 4 September 18, 2017
Product Specifications T-041 041--GL GL--E
Adjustable Tilt Pipe Mounting Kit for 2.0"-4.5" (50-115mm) OD round members for panel antennas. Includes 2 clamp sets.
General Specifications Application
Outdoor
Includes
Brackets
Package Quantity
1
|
Hardware
Mechanical Specifications Color
Silver
Material Type
Galvanized steel
Mechanical Tilt
0°–12° in steps of 2°
Dimensions Antenna-to-Pipe Distance
85.0 mm | 3.3 in
Bracket-to-Bracket Distance
976.0 mm
|
38.4 in
Compatible Diameter, maximum 115.0 mm | 4.5 in Compatible Diameter, minimum 50.0 mm | 2.0 in Compatible Length, maximum
1500.0 mm
|
59.1 in
Compatible Length, minimum
1200.0 mm
|
47.2 in
Net Weight
5.5 kg
|
12.1 lb
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 11364-2006 ISO 9001:2008
Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 21, 2017
page 4 of 4 September 18, 2017
