Preview only show first 10 pages with watermark. For full document please download

Product Specifications

Rating
Date

November 2018
Size

2.2MB
Views

8,845
Categories

Computers & electronics Computer cables Coaxial cables

Transcript

Product Specifications AVA5 AVA5--50FX AVA550FX, HELIAX® Andrew Virtual Air™ Coaxial Cable, corrugated copper, 7/8 in, black PE jacket Construction Materials Jacket Material PE Outer Conductor Material Corrugated copper Dielectric Material Foam PE Flexibility Standard Inner Conductor Material Copper Jacket Color Black Dimensions Nominal Size 7/8 in Cable Weight 0.29 lb/ft Diameter Over Dielectric 24.130 mm | 0.950 in Diameter Over Jacket 27.991 mm | 1.102 in Inner Conductor OD 9.4488 mm | 0.3720 in Outer Conductor OD 25.400 mm | 1.000 in | 0.43 kg/m Electrical Specifications Cable Impedance 50 ohm ±1 ohm Capacitance 22.0 pF/ft dc Resistance, Inner Conductor 0.825 ohms/kft | 2.888 ohms/km dc Resistance, Outer Conductor 0.400 ohms/kft | 1.313 ohms/km dc Test Voltage 6000 V Inductance 0.184 µH/m | 0.056 µH/ft Insulation Resistance 100000 Mohms•km Jacket Spark Test Voltage (rms) 8000 V Operating Frequency Band 1 – 5000 MHz Peak Power 91.0 kW Pulse Reflection 0.5% Velocity 90% | 73.0 pF/m Environmental Specifications Installation Temperature 40 °C to +60 °C (40 °F to +140 °F) Operating Temperature 55 °C to +70 °C (67 °F to +158 °F) Storage Temperature 70 °C to +70 °C (94 °F to +158 °F) General Specifications ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 8, 2013 Page 1 of 44 August 19, 2013 Product Specifications AVA5 AVA5--50FX Brand HELIAX® Mechanical Specifications Bending Moment 27.1 Nm | 20.0 ft lb Flat Plate Crush Strength 75.0 lb/in Minimum Bend Radius, Multiple Bends 254.00 mm | 10.00 in Minimum Bend Radius, Single Bend 127.00 mm | 5.00 in Number of Bends, minimum 15 Number of Bends, typical 30 Tensile Strength 159 kg | 350 lb Note Performance Note Values typical, unless otherwise stated Standard Conditions Attenuation, Ambient Temperature 20 °C | Average Power, Ambient Temperature 40 °C | Average Power, Inner Conductor Temperature 100 °C 68 °F 104 °F | 212 °F Return Loss/VSWR Frequency Band 680–800 MHz 800–960 MHz 1700–2200 MHz VSWR 1.13 1.13 1.13 Return Loss (dB) 24.30 24.30 24.30 ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 8, 2013 Page 2 of 44 August 19, 2013 Product Specifications AVA5 AVA5--50FX Attenuation Frequency (MHz) 0.5 1 1.5 2 10 20 30 50 88 100 108 150 174 200 300 400 450 500 512 600 700 800 824 894 960 1000 1250 1500 1700 1800 2000 2100 2200 2300 2500 2700 3000 3400 3700 4000 5000 Attenuation (dB/100 m) 0.08 0.113 0.138 0.16 0.359 0.51 0.627 0.814 1.088 1.162 1.209 1.433 1.548 1.665 2.059 2.398 2.553 2.7 2.735 2.977 3.235 3.478 3.534 3.694 3.841 3.927 4.44 4.912 5.268 5.439 5.771 5.933 6.091 6.247 6.551 6.845 7.273 7.819 8.213 8.596 9.807 Attenuation (dB/100 ft) 0.024 0.034 0.042 0.049 0.11 0.156 0.191 0.248 0.332 0.354 0.368 0.437 0.472 0.507 0.628 0.731 0.778 0.823 0.834 0.907 0.986 1.06 1.077 1.126 1.171 1.197 1.353 1.497 1.606 1.658 1.759 1.808 1.856 1.904 1.996 2.086 2.217 2.383 2.503 2.62 2.989 Average Power (kW) 91.00 74.43 60.73 52.56 23.37 16.46 13.39 10.32 7.72 7.23 6.95 5.86 5.43 5.05 4.08 3.50 3.29 3.11 3.07 2.82 2.60 2.42 2.38 2.27 2.19 2.14 1.89 1.71 1.59 1.54 1.46 1.42 1.38 1.34 1.28 1.23 1.15 1.07 1.02 0.98 0.86 * Values typical, guaranteed within 5% Regulatory Compliance/Certifications Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 8, 2013 Page 3 of 44 August 19, 2013 Product Specifications DHK DHK--78 78--4-P Double Hanger Kit for 7/8 in coaxial cable, double stack; includes hardware and angle adapte OBSOLETE This product was discontinued on: June 30, 2013 Replaced By: DHK786P Double Hanger Kit for 7/8 in coaxial cable, triple stack; includes hardware and angle adapter Dimensions Nominal Size 7/8 in Compatible Diameter, maximum 28.194 mm Compatible Diameter, minimum 26.670 mm | 1.050 in Height 101.60 mm | 4.00 in Length 93.46 mm | 3.68 in Width 26.21 mm | 1.03 in | 1.110 in Electrical Specifications DTF Effect 0.1 dB Return Loss Effect 0.1 dB General Specifications Hanger Type Composite clamp Brand ValuSite™ Cables per Hanger 4 Color Black Includes Angle adapter Material Type Engineered plastic Maximum Stack Height 2 Package Quantity 1 | Hardware | Stainless steel Mechanical Specifications Axial Load Capability, minimum with no cable slippage ≥5 times cable weight Corrosion Resistance, minimum with no degredation ≥500 hours in salt spray chamber Mounting M8 hardware Operating Temperature 40 °C to +85 °C (40 °F to +185 °F) UV Resistance, minimum with no degradation ≥100 hours exposure in accelerated UV life chamber Vibration Survival ≥4 hours at resonant frequency ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013 Page 4 of 44 August 19, 2013 Product Specifications DHK DHK--78 78--4-P Packed Dimensions Height 15.0 cm | 5.9 in Length 3.0 cm | 1.2 in Shipping Weight 0.57 kg Width 15.0 cm | 5.9 in | 1.25 lb ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013 Page 5 of 44 August 19, 2013 Product Specifications DHK DHK--78 78--6-P Double Hanger Kit for 7/8 in coaxial cable, triple stack; includes hardware and angle adapter Dimensions Nominal Size 7/8 in Compatible Diameter, maximum 28.194 mm | 1.110 in Compatible Diameter, minimum 26.670 mm | 1.050 in Height 20.70 cm Length 3.77 cm | 1.48 in Width 2.61 cm | 1.03 in | 8.15 in Electrical Specifications DTF Effect 0.1 dB Return Loss Effect 0.1 dB General Specifications Hanger Type Composite clamp Brand ValuSite™ Cables per Hanger 6 Color Black Harmonized System (HS) Code 854420 (Coaxial cable and other coaxial electric conductors) Includes Angle adapter Material Type Engineered plastic Maximum Stack Height 3 Package Quantity 1 | Hardware | Stainless steel Mechanical Specifications Axial Load Capability, minimum with no cable slippage ≥5 times cable weight Corrosion Resistance, minimum with no degredation ≥500 hours in salt spray chamber Mounting M8 hardware Operating Temperature 40 °C to +85 °C (40 °F to +185 °F) UV Resistance, minimum with no degradation ≥100 hours exposure in accelerated UV life chamber Vibration Survival ≥4 hours at resonant frequency Packed Dimensions Height 20.3 cm | 8.0 in Length 15.2 cm | 6.0 in Shipping Weight 0.27 kg | 0.60 lb ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013 Page 6 of 44 August 19, 2013 Product Specifications DHK DHK--78 78--6-P Included Products Angle Adapter (Product Component—not orderable) — Angle Adapter Hardware (Product Component—not orderable) — Hardware ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013 Page 7 of 44 August 19, 2013 Product Specifications SSH SSH--78 SnapStak® Hanger for 7/8 in coaxial cable Dimensions Nominal Size 7/8 in Compatible Diameter, maximum 30.988 mm Compatible Diameter, minimum 26.670 mm Height 41.00 mm | 1.61 in Length 64.00 mm | 2.52 in Width 40.00 mm | 1.57 in | 1.220 in | 1.050 in Electrical Specifications DTF Effect 0.1 dB Return Loss Effect 0.1 dB General Specifications Hanger Type Snapin hanger Cables per Hanger 1 Color Silver Material Type Stainless steel Maximum Stack Height 3 Package Quantity 10 Mechanical Specifications Axial Load Capability, minimum with no cable slippage ≥5 times cable weight Corrosion Resistance, minimum with no degredation ≥500 hours in salt spray chamber Mounting 3/4 in drilled cable ladder Operating Temperature 40 °C to +85 °C (40 °F to +185 °F) Vibration Survival ≥4 hours at resonant frequency Packed Dimensions Height 15.6 cm | 6.1 in Length 10.8 cm | 4.3 in Shipping Weight 0.42 kg Width 14.8 cm | 5.8 in | 0.93 lb Regulatory Compliance/Certifications ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 6, 2013 Page 8 of 44 August 19, 2013 Product Specifications SSH SSH--78 Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 6, 2013 Page 9 of 44 August 19, 2013 Product Specifications SSH SSH--78 78--4 SnapStak® Hanger for 7/8 in coaxial cable, quadruple stack capability, includes reinforcement bar Dimensions Nominal Size 7/8 in Compatible Diameter, maximum 30.988 mm Compatible Diameter, minimum 26.670 mm Height 41.00 mm | 1.61 in Length 64.00 mm | 2.52 in Width 40.00 mm | 1.57 in | 1.220 in | 1.050 in Electrical Specifications DTF Effect 0.1 dB Return Loss Effect 0.1 dB General Specifications Hanger Type Snapin hanger Cables per Hanger 1 Color Silver Material Type Stainless steel Maximum Stack Height 4 Package Quantity 10 Mechanical Specifications Axial Load Capability, minimum with no cable slippage ≥5 times cable weight Corrosion Resistance, minimum with no degredation ≥500 hours in salt spray chamber Mounting 3/4 in drilled cable ladder Operating Temperature 40 °C to +85 °C (40 °F to +185 °F) Vibration Survival ≥4 hours at resonant frequency Packed Dimensions Height 15.6 cm | 6.1 in Length 10.8 cm | 4.3 in Shipping Weight 0.42 kg Width 14.8 cm | 5.8 in | 0.93 lb Regulatory Compliance/Certifications ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 6, 2013 Page 10 of 44 August 19, 2013 Product Specifications SSH SSH--78 78--4 Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 6, 2013 Page 11 of 44 August 19, 2013 Product Specifications SEC SEC--378 SnapSeal™ Entry Cushion with 3 holes for 7/8 in corrugated coaxial cable Dimensions Nominal Size 7/8 in Height 101.60 mm Length 31.75 mm | | 4.00 in 1.25 in General Specifications Cable Type Corrugated Cables per Cushion 3 Color Black Includes Compression ring Material Type Thermoplastic elastomer Package Quantity 1 | SnapSeal™ entry cushion Mechanical Specifications UV Resistance Test Method MILSTD810E, Procedure 11, Method 505 UV Resistance, minimum with no degradation ≥1000 hours Weather Resistance Test Method 04AS0003.9.0 | IEC 60529:2001, IP66 Packed Dimensions Height 169.9 mm | 6.7 in Length 99.8 mm | 3.9 in Shipping Weight 0.80 kg Width 129.8 mm | 5.1 in | 1.76 lb Regulatory Compliance/Certifications Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013 Page 12 of 44 August 19, 2013 Product Specifications CSG78 CSG78--06B1A Universal Compact SureGround™ Grounding Kit for 7/8 in corrugated and smoothwall coaxial cable Dimensions Nominal Size 7/8 in Bonding Conductor Length 609.6 mm Compatible Diameter, maximum 28.372 mm | 1.117 in Compatible Diameter, minimum 27.559 mm | 1.085 in Enclosure Length 62.2 mm | 2.5 in Enclosure Width 40.1 mm | 1.6 in | 24 in Electrical Specifications Current Handling Tested to withstand 100,000 amps peak current surge Current Handling Test Method MILSTD1757 Grounding, Bonding and Shielding Test Method MILSTD188124A Lightning Protection Test Method IEC 10241 General Specifications Cable Type Corrugated Grounding Kit Type Compact SureGround™ Grounding Kits | Smoothwall Brand SureGround™ Harmonized System (HS) Code 854420 (Coaxial cable and other coaxial electric conductors) Color Black Bonding Conductor Material Copper Bonding Conductor Wire Size 6 gauge Bonding Conductor Jacketing Material PE Grounding Strap Material Tinned copper Includes Grounding kit Locking Bail Material Stainless steel Lug Attachment Factory attached Lug Type Onehole lug Package Quantity 1 Rivet Material Tinned copper Weatherproofing Method Tinned copper strap contact overmolded with EPDM rubber | Hardware | Lug Mechanical Specifications Blowing Rain Test Method MILSTD810, Method 506 Corrosion Test Method MILSTD1344, Method 1001 Freezing Rain/Icing Test Method MILSTD810, Method 521 Humidity Test Method MILSTD1344, Method 1002 Immersion Test Method IEC 60529:2001, IP68 ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 6, 2013 Page 13 of 44 August 19, 2013 Product Specifications CSG78 CSG78--06B1A Operating Temperature 40 °C to +85 °C (40 °F to +185 °F) Storage Temperature 40 °C to +80 °C (40 °F to +176 °F) Thread Size 3/8 in UV Resistance Test Method MILSTD810, Method 505 Vibration Test Method MILSTD202, Method 214 Packed Dimensions Height 447.0 mm Length 68.6 mm | 2.7 in Shipping Weight 0.36 kg Width 396.2 mm | | 17.6 in 0.79 lb | 15.6 in * Footnotes Grounding, Bonding and Shielding Test Method Military Standard for Grounding, Bonding, and Shielding: Bond Resistance Requirement of a Maximum dc resistance of 0.001 ohm Lightning Protection Test Method Protection Against Lightning Electromagnetic Impulse, Table 1—Protection Level III–IV, 199502 ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 6, 2013 Page 14 of 44 August 19, 2013 Product Specifications CSG78 CSG78--12B2U Universal Compact SureGround™ Grounding Kit for 7/8 in corrugated and smoothwall coaxial cable Dimensions Nominal Size 7/8 in Bonding Conductor Length 1143.0 mm | 45 in Compatible Diameter, maximum 28.372 mm | 1.117 in Compatible Diameter, minimum 27.559 mm | 1.085 in Enclosure Length 62.2 mm | 2.5 in Enclosure Width 40.1 mm | 1.6 in Electrical Specifications Current Handling Tested to withstand 100,000 amps peak current surge Current Handling Test Method MILSTD1757 Grounding, Bonding and Shielding Test Method MILSTD188124A Lightning Protection Test Method IEC 10241 General Specifications Cable Type Corrugated Grounding Kit Type Compact SureGround™ Grounding Kits | Smoothwall Brand SureGround™ Color Black Bonding Conductor Material Copper Bonding Conductor Wire Size 6 gauge Bonding Conductor Jacketing Material PE Grounding Strap Material Tinned copper Includes Grounding kit Locking Bail Material Stainless steel Lug Attachment Field attached Lug Type Twohole lug Package Quantity 1 Rivet Material Tinned copper Weatherproofing Method Tinned copper strap contact overmolded with EPDM rubber | Hardware | Lug Mechanical Specifications Blowing Rain Test Method MILSTD810, Method 506 Corrosion Test Method MILSTD1344, Method 1001 Freezing Rain/Icing Test Method MILSTD810, Method 521 Humidity Test Method MILSTD1344, Method 1002 Immersion Test Method IEC 60529:2001, IP68 Operating Temperature 40 °C to +85 °C (40 °F to +185 °F) ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 6, 2013 Page 15 of 44 August 19, 2013 Product Specifications CSG78 CSG78--12B2U Storage Temperature 40 °C to +80 °C (40 °F to +176 °F) Thread Size 3/8 in UV Resistance Test Method MILSTD810, Method 505 Vibration Test Method MILSTD202, Method 214 Packed Dimensions Height 447.0 mm Length 68.6 mm | 2.7 in Shipping Weight 0.45 kg Width 396.2 mm | | 17.6 in 1.00 lb | 15.6 in * Footnotes Grounding, Bonding and Shielding Test Method Military Standard for Grounding, Bonding, and Shielding: Bond Resistance Requirement of a Maximum dc resistance of 0.001 ohm Lightning Protection Test Method Protection Against Lightning Electromagnetic Impulse, Table 1—Protection Level III–IV, 199502 ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 6, 2013 Page 16 of 44 August 19, 2013 Product Specifications SG78 SG78--06B2A SureGround® Grounding Kit for 7/8 in coaxial cable Dimensions Nominal Size 7/8 in Bonding Conductor Length 609.6 mm Cable Jacketing Removal Length, maximum 38.1 mm | 1 1/2 in Cable Jacketing Removal Length, minimum 38.1 mm | 1 1/2 in Compatible Diameter, maximum 28.702 mm | 1.130 in Compatible Diameter, minimum 26.670 mm | 1.050 in | 24 in Electrical Specifications Current Handling Tested to withstand 100,000 amps peak current surge Current Handling Test Method MILSTD1757 Grounding, Bonding and Shielding Test Method MILSTD188124A Lightning Protection Test Method IEC 10241 General Specifications Cable Type Corrugated Grounding Kit Type SureGround™ Grounding Kits | Smoothwall Brand SureGround™ Harmonized System (HS) Code 854420 (Coaxial cable and other coaxial electric conductors) Color Black Bonding Conductor Material Copper Bonding Conductor Wire Size 6 gauge Bonding Conductor Jacketing Material PE Grounding Strap Material Tinned copper Includes Grounding kit | Hardware | roll of 24 in butyl rubber tape Locking Bail Material Stainless steel Lug Attachment Factory attached Lug Type Twohole lug Package Quantity 1 Rivet Material Tinned copper Weatherproofing Method Butyl and electric tape Lug | One roll of 2 in PVC tape | One Mechanical Specifications Blowing Rain Test Method MILSTD810, Method 506 Corrosion Test Method MILSTD1344, Method 1001 Freezing Rain/Icing Test Method MILSTD810, Method 521 Humidity Test Method MILSTD1344, Method 1002 ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 6, 2013 Page 17 of 44 August 19, 2013 Product Specifications SG78 SG78--06B2A Immersion Test Method IEC 60529:2001, IP68 Operating Temperature 40 °C to +85 °C (40 °F to +185 °F) Storage Temperature 40 °C to +80 °C (40 °F to +176 °F) Thread Size 3/8 in UV Resistance Test Method MILSTD810, Method 505 Vibration Test Method MILSTD202, Method 214 | M10 Packed Dimensions Height 228.6 mm | 9.0 in Length 57.2 mm | 2.3 in Shipping Weight 0.62 kg Width 215.9 mm | 8.5 in | 1.37 lb Regulatory Compliance/Certifications Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system Included Products 990571 — Black 2 in PVC Tape, 20 ft 4261510 — Butyl Rubber Tape, 24 in * Footnotes Grounding, Bonding and Shielding Test Method Military Standard for Grounding, Bonding, and Shielding: Bond Resistance Requirement of a Maximum dc resistance of 0.001 ohm Lightning Protection Test Method Protection Against Lightning Electromagnetic Impulse, Table 1—Protection Level III–IV, 199502 ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 6, 2013 Page 18 of 44 August 19, 2013 Product Specifications SG78 SG78--12B2U SureGround® Grounding Kit for 7/8 in coaxial cable Dimensions Nominal Size 7/8 in Bonding Conductor Length 1219.2 mm Cable Jacketing Removal Length, maximum 38.1 mm | 1 1/2 in Cable Jacketing Removal Length, minimum 38.1 mm | 1 1/2 in Compatible Diameter, maximum 28.702 mm | 1.130 in Compatible Diameter, minimum 26.670 mm | 1.050 in | 48 in Electrical Specifications Current Handling Tested to withstand 100,000 amps peak current surge Current Handling Test Method MILSTD1757 Grounding, Bonding and Shielding Test Method MILSTD188124A Lightning Protection Test Method IEC 10241 General Specifications Cable Type Corrugated Grounding Kit Type SureGround™ Grounding Kits | Smoothwall Brand SureGround™ Color Black Bonding Conductor Material Copper Bonding Conductor Wire Size 6 gauge Bonding Conductor Jacketing Material PE Grounding Strap Material Tinned copper Includes Grounding kit | Hardware | roll of 24 in butyl rubber tape Locking Bail Material Stainless steel Lug Attachment Field attached Lug Type Twohole lug Package Quantity 1 Rivet Material Tinned copper Weatherproofing Method Butyl and electric tape Lug | One roll of 2 in PVC tape | One Mechanical Specifications Blowing Rain Test Method MILSTD810, Method 506 Corrosion Test Method MILSTD1344, Method 1001 Freezing Rain/Icing Test Method MILSTD810, Method 521 Humidity Test Method MILSTD1344, Method 1002 Immersion Test Method IEC 60529:2001, IP68 ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 6, 2013 Page 19 of 44 August 19, 2013 Product Specifications SG78 SG78--12B2U Operating Temperature 40 °C to +85 °C (40 °F to +185 °F) Storage Temperature 40 °C to +80 °C (40 °F to +176 °F) Thread Size 3/8 in UV Resistance Test Method MILSTD810, Method 505 Vibration Test Method MILSTD202, Method 214 | M10 Packed Dimensions Height 228.6 mm | 9.0 in Length 57.2 mm | 2.3 in Shipping Weight 0.62 kg Width 215.9 mm | 8.5 in | 1.37 lb Regulatory Compliance/Certifications Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system Included Products 990571 — Black 2 in PVC Tape, 20 ft 4261510 — Butyl Rubber Tape, 24 in * Footnotes Grounding, Bonding and Shielding Test Method Military Standard for Grounding, Bonding, and Shielding: Bond Resistance Requirement of a Maximum dc resistance of 0.001 ohm Lightning Protection Test Method Protection Against Lightning Electromagnetic Impulse, Table 1—Protection Level III–IV, 199502 ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 6, 2013 Page 20 of 44 August 19, 2013 Product Specifications 78 78--HPT EZfit® Manual Cable Preparation Tool for 7/8 in coaxial cable Dimensions Nominal Size 7/8 in General Specifications Tool Type Manual cable preparation tool Application Prepares cable for connector attachment Brand EZfit® Combination Blades Included 2 Cutting Blade Life 150 cable preparations Includes One AVA550 tool bit | One cutting tool body wrench | Ten saw guides Jacket Blades Included 1 Material Type, Blade Hardened tool steel Material Type, Body Engineered plastic Package Quantity 1 | One FXL780 tool bit | One hex Packed Dimensions Height 14.6 cm | 5.7 in Length 8.9 cm | 3.5 in Shipping Weight 0.27 kg Width 8.3 cm | 3.3 in | 0.59 lb Regulatory Compliance/Certifications Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013 Page 21 of 44 August 19, 2013 Product Specifications A5FX A5FX--EZPT EZfit® Automated Cable Preparation Tool for AVA550FX coaxial cable Dimensions Nominal Size 7/8 in General Specifications Tool Type Automated cable preparation tool Application Prepares cable for connector attachment Brand EZfit® Cutting Blade Life 150 cable preparations Cutting Blades Included 2 Jacket Blades Included 1 Material Type, Blade Hardened tool steel Material Type, Body Aluminum Package Quantity 1 Packed Dimensions Height 12.1 cm | 4.8 in Length 8.9 cm | 3.5 in Shipping Weight 0.20 kg Width 8.3 cm | 3.3 in | 0.43 lb Regulatory Compliance/Certifications Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013 Page 22 of 44 August 19, 2013 Product Specifications 19256B Laceup Hoisting Grip for 7/8 in coaxial cable, elliptical waveguide 77, and HELIAX® FiberFeed Hybrid cable Dimensions Nominal Size 7/8 in Grip Length, minimum 431.80 mm | 17.00 in Leader Length, minimum 330.20 mm | 13.00 in Electrical Specifications DTF Effect 0.1 dB Return Loss Effect 0.1 dB General Specifications Tool Type Hoisting grip Hoisting Grip Type Laceup hoisting grip Attachment Spacing Intervals 61 m | 200 ft Material Type Stainless steel Package Quantity 1 Support Clamp Not included Mechanical Specifications Pull Load Capacity 500 lb Packed Dimensions Height 3.8 cm | 1.5 in Length 22.2 cm | 8.7 in Width 21.8 cm | 8.6 in Shipping Weight 0.22 kg | 0.49 lb Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 113642006 ISO 9001:2008 Classification Compliant Below Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 8, 2013 Page 23 of 44 August 19, 2013 Product Specifications 19256B 19256B--C Laceup Hoisting Grip with 2 tie wraps for HELIAX® FiberFeed Hybrid cable Dimensions Nominal Size 7/8 in Grip Length, minimum 431.80 mm | 17.00 in Leader Length, minimum 330.20 mm | 13.00 in Electrical Specifications DTF Effect 0.1 dB Return Loss Effect 0.1 dB General Specifications Tool Type Hoisting grip Hoisting Grip Type Laceup hoisting grip Attachment Spacing Intervals 61 m | 200 ft Material Type Stainless steel Package Quantity 1 Support Clamp Not included Mechanical Specifications Pull Load Capacity 500 lb Packed Dimensions Height 3.8 cm | 1.5 in Length 22.2 cm | 8.7 in Width 21.8 cm | 8.6 in Shipping Weight 0.22 kg | 0.49 lb Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 113642006 ISO 9001:2008 Classification Compliant Below Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 29, 2013 Page 24 of 44 August 19, 2013 Product Specifications L5SGRIP Support Hoisting Grip for 7/8 in coaxial cable Dimensions Nominal Size 7/8 in Grip Length, minimum 431.80 mm | 17.00 in Leader Length, minimum 330.20 mm | 13.00 in Electrical Specifications DTF Effect 0.1 dB Return Loss Effect 0.1 dB General Specifications Tool Type Hoisting grip Hoisting Grip Type Support hoisting grip Attachment Spacing Intervals 61 m | 200 ft Installation Tool Required; not included Material Type Stainless steel Package Quantity 1 Support Clamp Included Mechanical Specifications Pull Load Capacity 500 lb Packed Dimensions Shipping Weight 0.33 kg | 0.72 lb Regulatory Compliance/Certifications Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 29, 2013 Page 25 of 44 August 19, 2013 Product Specifications EZW EZW--7812 Combination Tool for 1/2 in and 7/8 in EZfit® connectors Dimensions Nominal Size 1/2 in Wrench Opening 20 mm | 17 mm | 34 mm | 7/8 in General Specifications Tool Type Combination tool Application Aids in field installation of connectors Material Type Steel Package Quantity 1 Packed Dimensions Height 6.6 cm | 2.6 in Length 23.8 cm | 9.4 in Shipping Weight 0.47 kg | 1.03 lb Regulatory Compliance/Certifications Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013 Page 26 of 44 August 19, 2013 Product Specifications GKT GKT--78SG Aluminum Grounding Kit Preparation Tool for 7/8 in corrugated cable SG series grounding kits General Specifications Tool Type Grounding kit preparation tool Application Prepares cable for grounding kit attachment Cutting Blade Life 150 cable preparations Cutting Blades Included 1 Material Type Aluminum Package Quantity 1 | Steel Packed Dimensions Height 7.8 cm | 3.1 in Length 2.4 cm | 0.9 in Shipping Weight 0.42 kg Width 2.3 cm | 0.9 in | 0.92 lb Regulatory Compliance/Certifications Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013 Page 27 of 44 August 19, 2013 Product Specifications TW TW--78 78--EZFC Torque Wrench for 7/8 in EZfit® connectors, 34 mm Dimensions Nominal Size 7/8 in Wrench Opening 34 mm | 1 in General Specifications Tool Type Torque wrench Application Attaches connectors to coaxial cable Material Type Steel Package Quantity 1 Mechanical Specifications Calibration 6 mo Torque Tolerance +5/0 Torque Value 34 Nm | 25 ft lb Packed Dimensions Height 29.9 cm | 11.8 in Length 10.6 cm | 4.2 in Shipping Weight 2.19 kg | 4.83 lb Width 29.9 cm | 11.8 in Regulatory Compliance/Certifications Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013 Page 28 of 44 August 19, 2013 Product Specifications 245171 Andrew 3M™ Cold Shrink™ Kit for 7/8 in to 1/4 in through 1/2 in connections Dimensions Nominal Size 1/2 in Cable Diameter for Seal, maximum 21.34 mm | 1/4 in Cable Diameter for Seal, minimum 7.37 mm | 0.29 in Inner Diameter 51.31 mm Length 254.00 mm Width 53.85 mm | | 7/8 in 0.84 in | 2.02 in | | 10.00 in 2.12 in General Specifications Application Provides additional moisture seal for cable connections Applications per Kit One 1/4 in–1/2 in to 7/8 in Color Black Includes One EPDM rubber tube Material Type EPDM rubber Package Quantity 1 | One sealing foam strip Mechanical Specifications UV Resistance Test Method UV condensation reference ASTMG53, light source UVA 340 fluorescent lamp UV Resistance, minimum with no degradation ≥1000 hours Weather Resistance Test Method 04AS0003.6.0 | MILSTD1344A, Method 1002 Packed Dimensions Height 30.0 cm Length 4.6 cm | 1.8 in | Shipping Weight 0.18 kg Width 7.0 cm | 2.8 in | 11.8 in 0.40 lb Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 113642006 ISO 9001:2008 Classification Compliant Below Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013 Page 29 of 44 August 19, 2013 Product Specifications 245174 Andrew 3M™ Cold Shrink™ Kit for 1/2 in through 7/8 in antenna and device connections Dimensions Nominal Size 1/2 in Cable Diameter for Seal, maximum 21.34 mm | 7/8 in | 0.84 in Cable Diameter for Seal, minimum 16.00 mm | 0.63 in Inner Diameter 51.31 mm | 2.02 in Length 203.20 mm Width 53.85 mm | | 8.00 in 2.12 in General Specifications Application Provides additional moisture seal for cable connections Applications per Kit One 1/2 in–7/8 in Color Black Includes One EPDM rubber tube Material Type EPDM rubber Package Quantity 1 | One sealing foam strip Mechanical Specifications UV Resistance Test Method UV condensation reference ASTMG53, light source UVA 340 fluorescent lamp UV Resistance, minimum with no degradation ≥1000 hours Weather Resistance Test Method 04AS0003.6.0 | MILSTD1344A, Method 1002 Packed Dimensions Height 25.5 cm Length 6.4 cm | 2.5 in | Shipping Weight 0.16 kg Width 6.4 cm | 2.5 in | 10.0 in 0.34 lb Regulatory Compliance/Certifications Agency ISO 9001:2008 Classification Designed, manufactured and/or distributed under this quality management system ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013 Page 30 of 44 August 19, 2013 Product Specifications 221213 Weatherproofing Kit for Connectors and Splices, includes butyl rubber and PVC tape Dimensions Nominal Size 11/4 in | 15/8 in in | 7/8 in | 1/2 in | 1/4 in | 21/4 in | 3/8 in | 5/8 General Specifications Application Provides additional moisture seal for cable connections Applications per Kit Four 1/2 in–7/8 in | Twelve 1/2 in–1/2 in device | Two 1/2 in–21/4 in Harmonized System (HS) Code 854420 (Coaxial cable and other coaxial electric conductors) Includes One roll of 2 in PVC tape rolls of 3/4 in PVC tape Material Type Butyl rubber tape Package Quantity 1 | | | Twelve 1/2 in–7/8 in to Six rolls of 21/2 in butyl rubber tape | Two PVC tape Mechanical Specifications UV Resistance Test Method Butyl test method in QUV weatherometer cycle of 8 hours UV at 150 °F then 4 hours of condensation at 104 °F | PVC tape test method UL 510, ASTM D1000 UV Resistance, minimum with no degradation ≥1000 hours Weather Resistance Test Method 04AS0003.6.0 | MILSTD1344A, Method 1002 Packed Dimensions Height 19.6 cm | 7.7 in Length 9.6 cm | 3.8 in Shipping Weight 1.52 kg Width 17.4 cm | 6.9 in | 3.35 lb Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 113642006 ISO 9001:2008 Classification Compliant Below Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system Included Products ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013 Page 31 of 44 August 19, 2013 Product Specifications 221213 4261510 — Butyl Rubber Tape, 24 in 990541 — Black 3/4 in PVC Tape, 66 ft 990571 — Black 2 in PVC Tape, 20 ft ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 26, 2013 Page 32 of 44 August 19, 2013 Product Specifications 78EZDF 716 DIN Female EZfit® for 7/8 in FXL780 and AVA550 cable General Specifications Interface 716 DIN Female Body Style Straight Brand EZfit® Harmonized System (HS) Code 854420 (Coaxial cable and other coaxial electric conductors) Mounting Angle Straight Electrical Specifications Connector Impedance 50 ohm Operating Frequency Band 0 – 5000 MHz Cable Impedance 50 ohm 3rd Order IMD, typical 116 dBm @ 1800 MHz 3rd Order IMD Test Method Two +43 dBm carriers RF Operating Voltage, maximum (vrms) 1415.00 V dc Test Voltage 4000 V Outer Contact Resistance, maximum 1.50 mOhm Inner Contact Resistance, maximum 0.40 mOhm Insulation Resistance, minimum 5000 MOhm Peak Power, maximum 40.00 kW Insertion Loss, typical 0.05 dB ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 8, 2013 Page 33 of 44 August 19, 2013 Product Specifications 78EZDF Outline Drawing Mechanical Specifications Outer Contact Attachment Method Clamp Inner Contact Attachment Method Captivated Outer Contact Plating Trimetal Inner Contact Plating Silver Attachment Durability 25 cycles Interface Durability 50 cycles Interface Durability Method IEC 611694:9.5 Connector Retention Tensile Force 1334 N Connector Retention Torque 8.13 Nm | 72.00 in lb Insertion Force 200.17 N | 45.00 lbf Insertion Force Method IEC 611691:15.2.4 Pressurizable No | 300 lbf Dimensions Nominal Size 7/8 in Diameter 37.10 mm Length 47.90 mm Weight 136.60 g | | | 1.46 in 1.89 in 0.30 lb Environmental Specifications Operating Temperature 40 °C to +85 °C (40 °F to +185 °F) Storage Temperature 55 °C to +85 °C (67 °F to +185 °F) Immersion Depth 1 m Immersion Test Mating Mated ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 8, 2013 Page 34 of 44 August 19, 2013 Product Specifications 78EZDF Immersion Test Method IEC 60529:2001, IP68 Water Jetting Test Mating Mated Water Jetting Test Method IEC 60529:2001, IP66 Moisture Resistance Test Method IEC 60529, IP68 Mechanical Shock Test Method IEC 60068227 Vibration Test Method IEC 6006826 Corrosion Test Method IEC 60068211, Test Condition Ka Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F Return Loss/VSWR Frequency Band 50–1000 MHz 1000–1900 MHz 1900–2200 MHz 2200–2700 MHz 2700–3600 MHz 3600–5000 MHz VSWR 1.02 1.03 1.04 1.06 1.07 1.09 Return Loss (dB) 40.00 38.00 34.00 31.00 30.00 27.00 Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 113642006 ISO 9001:2008 Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system * Footnotes Immersion Depth Immersion at specified depth for 24 hours Insertion Loss, typical 0.05√¯freq (GHz) (not applicable for elliptical waveguide) ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 8, 2013 Page 35 of 44 August 19, 2013 Product Specifications 78EZDM 716 DIN Male EZfit® for 7/8 in FXL780 and AVA550 cable General Specifications Interface 716 DIN Male Body Style Straight Brand EZfit® Harmonized System (HS) Code 854420 (Coaxial cable and other coaxial electric conductors) Mounting Angle Straight Electrical Specifications Connector Impedance 50 ohm Operating Frequency Band 0 – 5000 MHz Cable Impedance 50 ohm 3rd Order IMD, typical 116 dBm @ 1800 MHz 3rd Order IMD Test Method Two +43 dBm carriers RF Operating Voltage, maximum (vrms) 1415.00 V dc Test Voltage 4000 V Outer Contact Resistance, maximum 1.50 mOhm Inner Contact Resistance, maximum 0.40 mOhm Insulation Resistance, minimum 5000 MOhm Peak Power, maximum 40.00 kW Insertion Loss, typical 0.05 dB ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 8, 2013 Page 36 of 44 August 19, 2013 Product Specifications 78EZDM Outline Drawing Mechanical Specifications Outer Contact Attachment Method Clamp Inner Contact Attachment Method Captivated Outer Contact Plating Trimetal Inner Contact Plating Silver Attachment Durability 25 cycles Interface Durability 500 cycles Interface Durability Method IEC 611694:9.5 Connector Retention Tensile Force 1334 N Connector Retention Torque 8.13 Nm | 72.00 in lb Insertion Force 200.17 N | 45.00 lbf Insertion Force Method IEC 611691:15.2.4 Pressurizable No Coupling Nut Proof Torque 24.86 Nm | 220.00 in lb Coupling Nut Retention Force 1000.85 N | 225.00 lbf | 300 lbf Coupling Nut Retention Force Method MILC39012C3.25, 4.6.22 Dimensions Nominal Size 7/8 in Diameter 37.21 mm Length 53.30 mm Weight 169.87 g | | | 1.47 in 2.10 in 0.37 lb Environmental Specifications Operating Temperature 40 °C to +85 °C (40 °F to +185 °F) ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 8, 2013 Page 37 of 44 August 19, 2013 Product Specifications 78EZDM Storage Temperature 55 °C to +85 °C (67 °F to +185 °F) Immersion Depth 1 m Immersion Test Mating Mated Immersion Test Method IEC 60529:2001, IP68 Water Jetting Test Mating Mated Water Jetting Test Method IEC 60529:2001, IP66 Moisture Resistance Test Method MILSTD202F, Method 106F Mechanical Shock Test Method MILSTD202F, Method 213B, Test Condition C Vibration Test Method IEC 6006826 Corrosion Test Method MILSTD1344A, Method 1001.1, Test Condition A Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F Return Loss/VSWR Frequency Band 50–1000 MHz 1000–1900 MHz 1900–2200 MHz 2200–2700 MHz 2700–3600 MHz 3600–5000 MHz VSWR 1.02 1.03 1.03 1.05 1.07 1.09 Return Loss (dB) 40.00 38.00 36.00 32.00 30.00 27.00 Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 113642006 ISO 9001:2008 Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system * Footnotes Immersion Depth Immersion at specified depth for 24 hours Insertion Loss, typical 0.05√¯freq (GHz) (not applicable for elliptical waveguide) ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 8, 2013 Page 38 of 44 August 19, 2013 Product Specifications 78EZNF Type N Female EZfit® for 7/8 in FXL780 and AVA550 cable General Specifications Interface N Female Body Style Straight Brand EZfit® Mounting Angle Straight Electrical Specifications Connector Impedance 50 ohm Operating Frequency Band 0 – 5000 MHz Cable Impedance 50 ohm 3rd Order IMD, typical 116 dBm @ 1800 MHz 3rd Order IMD Test Method Two +43 dBm carriers RF Operating Voltage, maximum (vrms) 707.00 V dc Test Voltage 2000 V Outer Contact Resistance, maximum 0.30 mOhm Inner Contact Resistance, maximum 2.00 mOhm Insulation Resistance, minimum 5000 MOhm Peak Power, maximum 10.00 kW Insertion Loss, typical 0.05 dB ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 8, 2013 Page 39 of 44 August 19, 2013 Product Specifications 78EZNF Outline Drawing Mechanical Specifications Outer Contact Attachment Method Clamp Inner Contact Attachment Method Captivated Outer Contact Plating Trimetal Inner Contact Plating Silver Attachment Durability 25 cycles Interface Durability 500 cycles Interface Durability Method IEC 6116916:9.5 Connector Retention Tensile Force 1334 N Connector Retention Torque 8.13 Nm Insertion Force 66.72 N Insertion Force Method MILC39012C3.12, 4.6.9 Pressurizable No | 300 lbf | | 72.00 in lb 15.00 lbf Dimensions Nominal Size 7/8 in Diameter 37.21 mm Length 51.20 mm Weight 136.00 g | | | 1.47 in 2.02 in 0.30 lb Environmental Specifications Operating Temperature 40 °C to +85 °C (40 °F to +185 °F) Storage Temperature 55 °C to +85 °C (67 °F to +185 °F) Immersion Depth 1 m Immersion Test Mating Mated ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 8, 2013 Page 40 of 44 August 19, 2013 Product Specifications 78EZNF Immersion Test Method IEC 60529:2001, IP68 Water Jetting Test Mating Mated Water Jetting Test Method IEC 60529:2001, IP66 Moisture Resistance Test Method MILSTD202F, Method 106F Mechanical Shock Test Method MILSTD202F, Method 213B, Test Condition C Thermal Shock Test Method MILSTD202F, Method 107G, Test Condition A1, Low Temperature 55 °C Vibration Test Method IEC 6006826 Corrosion Test Method MILSTD1344A, Method 1001.1, Test Condition A Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F Return Loss/VSWR Frequency Band 50–1000 MHz 1000–1900 MHz 1900–2200 MHz 2200–2700 MHz 2700–3600 MHz 3600–5000 MHz VSWR 1.02 1.03 1.04 1.06 1.07 1.11 Return Loss (dB) 40.00 38.00 34.00 31.00 30.00 26.00 Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 113642006 ISO 9001:2008 Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system * Footnotes Immersion Depth Immersion at specified depth for 24 hours Insertion Loss, typical 0.05√¯freq (GHz) (not applicable for elliptical waveguide) ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 8, 2013 Page 41 of 44 August 19, 2013 Product Specifications 78EZNM Type N Male EZfit® for 7/8 in FXL780 and AVA550 cable General Specifications Interface N Male Body Style Straight Brand EZfit® Harmonized System (HS) Code 854420 (Coaxial cable and other coaxial electric conductors) Mounting Angle Straight Electrical Specifications Connector Impedance 50 ohm Operating Frequency Band 0 – 5000 MHz Cable Impedance 50 ohm 3rd Order IMD, typical 116 dBm @ 1800 MHz 3rd Order IMD Test Method Two +43 dBm carriers RF Operating Voltage, maximum (vrms) 707.00 V dc Test Voltage 2000 V Outer Contact Resistance, maximum 0.30 mOhm Inner Contact Resistance, maximum 2.00 mOhm Insulation Resistance, minimum 5000 MOhm Peak Power, maximum 10.00 kW Insertion Loss, typical 0.05 dB ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 8, 2013 Page 42 of 44 August 19, 2013 Product Specifications 78EZNM Outline Drawing Mechanical Specifications Outer Contact Attachment Method Clamp Inner Contact Attachment Method Captivated Outer Contact Plating Trimetal Inner Contact Plating Silver Attachment Durability 25 cycles Interface Durability 500 cycles Interface Durability Method IEC 6116916:9.5 Connector Retention Tensile Force 1334 N Connector Retention Torque 8.13 Nm Insertion Force 66.72 N Insertion Force Method MILC39012C3.12, 4.6.9 Pressurizable No Coupling Nut Proof Torque 4.52 Nm | 40.00 in lb Coupling Nut Retention Force 444.82 N | 100.00 lbf | 300 lbf | | 72.00 in lb 15.00 lbf Coupling Nut Retention Force Method MILC39012C3.25, 4.6.22 Dimensions Nominal Size 7/8 in Diameter 37.21 mm Height 0.00 mm | 0.00 in Length 58.00 mm Weight 137.08 g | | | 1.47 in 2.28 in 0.30 lb Environmental Specifications ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 8, 2013 Page 43 of 44 August 19, 2013 Product Specifications 78EZNM Operating Temperature 40 °C to +85 °C (40 °F to +185 °F) Storage Temperature 55 °C to +85 °C (67 °F to +185 °F) Immersion Depth 1 m Immersion Test Mating Mated Immersion Test Method IEC 60529:2001, IP68 Water Jetting Test Mating Mated Water Jetting Test Method IEC 60529:2001, IP66 Moisture Resistance Test Method MILSTD202F, Method 106F Mechanical Shock Test Method MILSTD202F, Method 213B, Test Condition C Vibration Test Method IEC 6006826 Corrosion Test Method MILSTD1344A, Method 1001.1, Test Condition A Standard Conditions Attenuation, Ambient Temperature 20 °C | 68 °F Average Power, Ambient Temperature 40 °C | 104 °F Return Loss/VSWR Frequency Band 50–1000 MHz 1000–1900 MHz 1900–2200 MHz 2200–2700 MHz 2700–3600 MHz 3600–5000 MHz VSWR 1.02 1.03 1.04 1.05 1.07 1.11 Return Loss (dB) 40.00 38.00 35.00 32.00 30.00 26.00 Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 113642006 ISO 9001:2008 Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system * Footnotes Immersion Depth Immersion at specified depth for 24 hours Insertion Loss, typical 0.05√¯freq (GHz) (not applicable for elliptical waveguide) ©2013 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 8, 2013 Page 44 of 44 August 19, 2013

Product Specifications

Rating

Date

Size

Views

Categories

Share

Transcript

Forgot your password?.