Transcript
Product Specifications 760184069
OptiSPEED® LC to ST, Fiber Patch Cord, 1.6 mm Simplex, Plenum
Product Classification Portfolio
CommScope®
Brand
OptiSPEED®
Product Type
Fiber test patch cord
Regional Availability
Asia
|
Australia/New Zealand
|
EMEA
|
Latin America
|
North America
Construction Materials Fiber Type
OptiSPEED®, 62.5 µm multimode fiber (OM1)
Total Fibers, quantity
1
Dimensions Cord Length
4.00 m
Diameter Over Jacket
1.60 mm | 0.06 in
|
13.12 ft
Ordering Note
Fixed length assembly
Environmental Specifications Environmental Space
Plenum
Operating Temperature
-10 °C to +60 °C (+14 °F to +140 °F)
General Specifications Color, connector A
Blue
Color, connector B
Blue
Construction Type
Simplex patch cord
Interface Feature, connector A
Standard
Interface Feature, connector B
Standard
Interface, connector A
LC
Interface, connector B
ST
Mechanical Specifications Cable Retention Strength, maximum 4.40 lb @ 90 ° 11.24 lb @ 0 °
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU ISO 9001:2008
Classification Compliant Designed, manufactured and/or distributed under this quality management system
Included Products
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: September 12, 2017
page 1 of 7 September 18, 2017
Product Specifications 760184069 760160564 l
700004328
|
P-001-EF-6FE-F16RD
CS-6FE-TB |
(Product Component—not orderable)
— OptiSPEED® 1.6 mm Plenum Simplex Cable
(Product Component—not orderable) — OptiSPEED® OM1 Multimode Fiber
MFC-STU
— Pre-Radiused ST II Connector, multimode
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: September 12, 2017
page 2 of 7 September 18, 2017
Product Specifications 760160564 | P-001 001--EF EF--6FE 6FE--F16RD OptiSPEED® 1.6 mm Plenum Simplex Cable
Representative Image
General Specifications Cable Type
Cordage
Construction Type
Non-armored
Subunit Type
Gel-free
Construction Materials Fiber Type Solution
OptiSPEED®, 62.5 µm multimode fiber (OM1)
Total Fiber Count
1
Fiber Type
OptiSPEED®, 62.5 µm multimode fiber (OM1)
Fiber Type, quantity
1
Jacket Color
Red
Dimensions Cable Weight
2.0 lb/kft | 3.0 kg/km
Diameter Over Jacket
1.70 mm | 0.07 in
Physical Specifications Minimum Bend Radius, loaded
5.0 cm | 2.0 in
Minimum Bend Radius, unloaded
3.0 cm | 1.2 in
Tensile Load, long term, maximum
10 lbf
|
Tensile Load, short term, maximum 33 lbf
|
Vertical Rise, maximum
500.0 m
44 N 147 N |
1640.4 ft
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2017
page 3 of 7 September 18, 2017
Product Specifications 760160564 | P 760160564 | P--001 001--EF EF--6FE 6FE--F16RD
Flame Test Specifications Flame Test Listing
NEC OFNP (ETL) and c(ETL)
Flame Test Method
NFPA 262
Environmental Specifications Environmental Space
Plenum
Installation Temperature
0 °C to +70 °C (+32 °F to +158 °F)
Operating Temperature
-20 °C to +70 °C (-4 °F to +158 °F)
Storage Temperature
-40 °C to +70 °C (-40 °F to +158 °F)
Mechanical Test Specifications Compression
10 N/mm | 57 lb/in
Compression Test Method
FOTP-41
Flex
300 cycles
Flex Test Method
FOTP-104
Impact
0.55 ft lb
|
0.74 N-m
Impact Test Method
FOTP-25
|
IEC 60794-1 E4
Strain
See long and short term tensile loads
Strain Test Method
FOTP-33
Twist
10 cycles
Twist Test Method
FOTP-85
|
IEC 60794-1 E3 |
IEC 60794-1 E6
|
IEC 60794-1 E1
|
IEC 60794-1 E7
Environmental Test Specifications Heat Age
-20 °C to +85 °C (-4 °F to +185 °F)
Heat Age Test Method
IEC 60794-1 F9
Low High Bend
-20 °C to +70 °C (-4 °F to +158 °F)
Low High Bend Test Method
FOTP-37
Temperature Cycle
-20 °C to +70 °C (-4 °F to +158 °F)
Temperature Cycle Test Method
FOTP-3
| |
IEC 60794-1 E11 IEC 60794-1 F1
Qualification Specifications Cable Qualification Standards
ANSI/ICEA S-83-596
|
Telcordia GR-409
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU ISO 9001:2008
Classification Compliant Designed, manufactured and/or distributed under this quality management system
Included Products CS-6FE-TB
(Product Component—not orderable)
— OptiSPEED® OM1 Multimode Fiber
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2017
page 4 of 7 September 18, 2017
Product Specifications 760160564 | P 760160564 | P--001 001--EF EF--6FE 6FE--F16RD
* Footnotes Operating Temperature Specification applicable to non-terminated bulk fiber cable
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2017
page 5 of 7 September 18, 2017
Product Specifications 700004328 | MFC MFC--STU
Pre-Radiused ST II Connector, multimode
Construction Materials Fiber Type
LazrSPEED® 150, 50 µm multimode fiber (OM2+) | LazrSPEED® 300, 50 µm multimode fiber (OM3) | LazrSPEED® 550, 50 µm multimode fiber (OM4) | OptiSPEED®, 62.5 µm multimode fiber (OM1)
Ferrule Geometry
Pre-radiused
Ferrule Material
Zirconia
Dimensions Compatible Cable Diameter
0.9 mm | 1.6 mm | 3.0 mm
Length
56.00 mm
|
2.20 in
General Specifications Interface
ST
Body Style
Simplex
Interface Feature
Standard
Color
Black
Package Quantity
1
Mechanical Specifications Cable Retention Strength, maximum 0.50 lb @ 0 ° 11.24 lb @ 0 °
Optical Performance Insertion Loss, typical
0.30 dB
Return Loss, minimum
20.0 dB
Insertion Loss Change, mating
0.20 dB
Insertion Loss Change, temperature 0.10 dB
Optical Specifications Optical Components Standard
ANSI/TIA-568-C.3
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU ISO 9001:2008
Classification Compliant Designed, manufactured and/or distributed under this quality management system
* Footnotes Insertion Loss Change, mating
Maximum insertion loss change after 500 matings
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2017
page 6 of 7 September 18, 2017
Product Specifications 700004328 | MFC 700004328 | MFC--STU
Insertion Loss Change, temperature Maximum insertion loss change from -10 °C to +60 °C (+14 °F to +140 °F)
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2017
page 7 of 7 September 18, 2017
