Transcript
Product Specifications SBNHH SBNHH--1D85A
6-port sector antenna, 2x 698–896 and 4x 1695–2360 MHz, 85° HPBW, 3x RET l
Interleaved dipole technology providing for attractive, low wind load mechanical package
l
Three internal RETs for independent tilt on all three bands
Electrical Specifications Frequency Band, MHz Gain, dBi Beamwidth, Horizontal, degrees Beamwidth, Vertical, degrees Beam Tilt, degrees USLS (First Lobe), dB Isolation, dB Isolation, Intersystem, dB VSWR | Return Loss, dB PIM, 3rd Order, 2 x 20 W, dBc Input Power per Port, maximum, watts Polarization Impedance
698–806 806–896 1695–1880 1850–1990 1920–2200 2300–2360 13.0 13.0 15.9 16.6 16.8 17.1 84 87 81 79 80 77 18.9 17.1 7.9 7.3 6.9 6.0 2–18 2–18 1–9 1–9 1–9 1–9 15 15 14 15 15 14 25 25 25 25 25 25 30 30 25 25 25 25 1.5 | 14.0
1.5 | 14.0
1.5 | 14.0
1.5 | 14.0
1.5 | 14.0
1.5 | 14.0
-153 350 ±45° 50 ohm
-153 350 ±45° 50 ohm
-153 300 ±45° 50 ohm
-153 300 ±45° 50 ohm
-153 300 ±45° 50 ohm
-153 250 ±45° 50 ohm
Electrical Specifications, BASTA* Frequency Band, MHz Gain by all Beam Tilts, average, dBi Gain by all Beam Tilts Tolerance, dB Gain by Beam Tilt, average, dBi Beamwidth, Horizontal Tolerance, degrees Beamwidth, Vertical Tolerance, degrees USLS, beampeak to 20° above beampeak, dB Front-to-Back Total Power at 180° ± 30°, dB CPR at Boresight, dB CPR at Sector, dB
698–806 12.8 ±0.2
806–896 1695–1880 1850–1990 1920–2200 2300–2360 12.8 15.4 16.3 16.5 16.9 ±0.3 ±0.7 ±0.3 ±0.3 ±0.3
2 ° | 12.9
2 ° | 12.8
1 ° | 15.3
1 ° | 16.2
1 ° | 16.4
1 ° | 16.9
10 ° | 12.8
10 ° | 12.8
5 ° | 15.4
5 ° | 16.3
5 ° | 16.6
5 ° | 17.0
18 ° | 12.6
18 ° | 12.4
9 ° | 15.4
9 ° | 16.2
9 ° | 16.4
9 ° | 16.7
±2.3 ±1.1 16 22 20 15
±1.9 ±1.2 17 22 19 11
±3.9 ±0.4 14 26 17 10
±3.3 ±0.3 16 27 17 11
±4.4 ±0.5 16 26 18 9
±3.5 ±0.2 14 25 20 7
* CommScope® supports NGMN recommendations on Base Station Antenna Standards (BASTA). To learn more about the benefits of BASTA, download the whitepaper Time to Raise the Bar on BSAs.
Array Layout
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 26, 2017
page 1 of 5 September 28, 2017
Product Specifications SBNHH SBNHH--1D85A
General Specifications Operating Frequency Band
1695 – 2360 MHz
Antenna Type
Sector
Band
Multiband
Performance Note
Outdoor usage
|
698 – 896 MHz
Mechanical Specifications RF Connector Quantity, total
6
RF Connector Quantity, low band
2
RF Connector Quantity, high band
4
RF Connector Interface
7-16 DIN Female
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 26, 2017
page 2 of 5 September 28, 2017
Product Specifications SBNHH SBNHH--1D85A Color
Light gray
Grounding Type
RF connector inner conductor and body grounded to reflector and mounting bracket
Radiator Material
Aluminum
Radome Material
Fiberglass, UV resistant
Reflector Material
Aluminum
RF Connector Location
Bottom
Wind Loading, frontal
375.0 N @ 150 km/h 84.3 lbf @ 150 km/h
Wind Loading, lateral
121.0 N @ 150 km/h 27.2 lbf @ 150 km/h
Wind Loading, rear
441.0 N @ 150 km/h 99.1 lbf @ 150 km/h
Wind Speed, maximum
241 km/h
|
Low loss circuit board
|
150 mph
Dimensions Length
1219.0 mm
Width
301.0 mm
|
Depth
180.0 mm | 7.1 in
Net Weight, without mounting kit
14.4 kg
|
|
48.0 in 11.9 in
31.7 lb
Remote Electrical Tilt (RET) Information Input Voltage
10–30 Vdc
Internal RET
High band (2)
Power Consumption, idle state, maximum
2.0 W
|
Low band (1)
Power Consumption, normal conditions, maximum 13.0 W Protocol
3GPP/AISG 2.0 (Multi-RET)
RET Interface
8-pin DIN Female
RET Interface, quantity
1 female
|
|
8-pin DIN Male
1 male
Packed Dimensions Length
1339.0 mm | 52.7 in
Width
409.0 mm
|
16.1 in
Depth
299.0 mm
|
11.8 in
Shipping Weight
24.8 kg
54.7 lb
|
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 11364-2006 ISO 9001:2008
Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 26, 2017
page 3 of 5 September 28, 2017
Product Specifications SBNHH SBNHH--1D85A
Included Products BSAMNT-1
— Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one
scissor top bracket set and one bottom bracket set.
* Footnotes Performance Note
Severe environmental conditions may degrade optimum performance
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 26, 2017
page 4 of 5 September 28, 2017
Product Specifications BSAMNT BSAMNT--1
Wide Profile Antenna Downtilt Mounting Kit for 2.4 - 4.5 in (60 - 115 mm) OD round members. Kit contains one scissor top bracket set and one bottom bracket set.
General Specifications Application
Outdoor
Includes
Brackets
Package Quantity
1
|
Hardware
Mechanical Specifications Color
Silver
Material Type
Galvanized steel
Dimensions Compatible Diameter, maximum 115.0 mm | 4.5 in Compatible Diameter, minimum 60.0 mm | 2.4 in Net Weight
6.0 kg
|
13.3 lb
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 11364-2006 ISO 9001:2008
Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: August 7, 2017
page 5 of 5 September 28, 2017
