Transcript
Product Specifications SVA15PRSMI
HomeConnect® Mini Subscriber Amplifier, 15 dB, one port, with power inserter
Environmental Specifications Operating Temperature
-40 °C to +60 °C (-40 °F to +140 °F)
Safety Standard
CE
|
SCTE
Electrical Specifications Rx (Uplink) Operating Frequency Band
5 – 42 MHz
Insertion Loss, maximum
1.20 dB
Flatness
±0.5 dB
Return Loss, minimum
20.00 dB
Electrical Specifications Tx (Downlink) Operating Frequency Band
53 – 1002 MHz
Gain
15.00 dB
Flatness
±0.75 dB
Return Loss, minimum
20.00 dB
Noise Figure, maximum
4.00 dB
Electrical Specifications Isolation Isolation at Frequency Band, power port to RF output, minimum 55 dB @ 5–1002 MHz
Electrical Specifications Impedance
75 ohm
Operating Current at Voltage
200 mA @ 12 Vdc
Distortion Performance (CTB), minimum
80 -dBc
Distortion Performance (CSO), minimum
65 -dBc
Distortion Performance (X-Mod), minimum
75 -dB
Distortion Performance (CCN), minimum
70 -dBc
Hum Modulation, minimum
-75.00 dB
Group Delay, reverse, maximum
20 ns
Group Delay, channel 2–4, maximum
20 ns
Group Delay, channel 5–6, maximum
5 ns
Shielding Effectiveness, minimum
100 dB
Surge Capability Test Method
ANSI/SCTE 81 | IEEE C62.41-A3 (6 kV, 200 A, Ring wave) on all ports | IEEE C62.41-B3 (6 kV, 3000 A,
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 22, 2017
page 1 of 4 September 11, 2017
Product Specifications SVA15PRSMI Combination wave) on input port Surge Capability Waveform
1.2/50 voltage and 8/20 current combination waveform | 100 KHz ring wave waveform
General Specifications Device Type
Subscriber amplifier
Video Ports, quantity
1
Brand
HomeConnect®
Application
Indoor
Includes
Power adapter
Video Standard
NTSC
|
Outdoor |
Power inserter
Packed Dimensions Carton Quantity
20
Height
190.50 mm
Length
469.90 mm
|
18.50 in
Width
228.60 mm
|
9.00 in
Shipping Weight
8.39 kg
|
|
7.50 in
18.50 lb
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU ISO 9001:2008
Classification Designed, manufactured and/or distributed under this quality management system
Included Products CSHMPI CSMPI
— HomeConnect® Power Inserter for Subscriber Amplifiers with High Isolation
— HomeConnect® Power Inserter for Subscriber Amplifiers
* Footnotes Distortion Performance (CCN), minimum
CCN—Composite Carrier to Noise; 77 analog, 124 digital—256 QAM channel loading
Distortion Performance (CSO), minimum
CSO—Composite Second Order; 77 analog, 124 digital—256 QAM channel loading
Distortion Performance (CTB), minimum
CTB—Composite Triple Beat; 77 analog, 124 digital—256 QAM channel loading
Distortion Performance (X-Mod), minimum X-Mod—Cross Modulation; 77 analog, 124 digital—256 QAM channel loading Group Delay, channel 2–4, maximum
Channel 2 (3.58 MHz Span)
Group Delay, channel 5–6, maximum
Channel 4–6 (3.58 MHz Span)
Noise Figure, maximum
Total amplifier contribution
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 22, 2017
page 2 of 4 September 11, 2017
Product Specifications CSHMPI
HomeConnect® Power Inserter for Subscriber Amplifiers with High Isolation
Electrical Specifications Isolation Isolation at Frequency Band, power port to input, minimum 70 dB @ 5–1002 MHz
|
60 dB @ 1125–1675 MHz
Isolation at Frequency Band, power port to TV, minimum
|
60 dB @ 1125–1675 MHz
70 dB @ 5–1002 MHz
Electrical Specifications Operating Frequency Band
5 – 1675 MHz
Insertion Loss at Frequency Band, maximum
0.5 dB @ 5–1002 MHz
Return Loss at Frequency Band, input, minimum
20 dB @ 5–1002 MHz
Return Loss at Frequency Band, output, minimum
20 dB @ 5–1002 MHz
Voltage Range
8–18 Vdc
|
2.5 dB @ 1125–1675 MHz
General Specifications Device Type
Power inserter
Application
Directs power to the amplifiers by combining the power and RF paths directly
Brand
HomeConnect®
Packed Dimensions Carton Quantity
500
Height
228.60 mm
|
Length
533.40 mm
|
21.00 in
Width
228.60 mm
|
9.00 in
Shipping Weight
16.33 kg
36.00 lb
|
9.00 in
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU ISO 9001:2008
Classification Compliant Designed, manufactured and/or distributed under this quality management system
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 22, 2017
page 3 of 4 September 11, 2017
Product Specifications CSMPI
HomeConnect® Power Inserter for Subscriber Amplifiers
Electrical Specifications Isolation Isolation, port to port
25 dB
Electrical Specifications Operating Frequency Band
5 – 1675 MHz
Insertion Loss at Frequency Band, maximum
0.5 dB @ 5–1002 MHz
Return Loss at Frequency Band, input, minimum
20 dB @ 5–1002 MHz
|
2.5 dB @ 1125–1675 MHz
Return Loss at Frequency Band, output, minimum 20 dB @ 5–1002 MHz Voltage Range
8–18 Vdc
General Specifications Device Type
Power inserter
Application
Directs power to the amplifiers by combining the power and RF paths directly
Brand
HomeConnect®
Packed Dimensions Carton Quantity
500
Height
228.60 mm
Length
533.40 mm
|
21.00 in
Width
228.60 mm
|
9.00 in
Shipping Weight
16.33 kg
36.00 lb
|
|
9.00 in
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU ISO 9001:2008
Classification Compliant Designed, manufactured and/or distributed under this quality management system
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 22, 2017
page 4 of 4 September 11, 2017
