Transcript
Product Specifications CX3450004 | 150T135P3500JCASS COEX
ConQuest® Cable in Conduit, 1 1/2 in, SDR 13.5, terracotta (P3® 500 JCASS)
Product Classification Brand
ConQuest®
Product Type
Coaxial cable-in-conduit
Dimensions Nominal Size
1-1/2 in
Wall Thickness Designation SDR 13.5 Length
731.52 m
Weight
441.0 lb/kft
|
2400.00 ft
General Specifications Cable-In-Conduit Type
P3® in duct
Cable Type
500 series
Conduit Type
Non-toneable
Color
Terracotta
Brand
ConQuest®
Wall Type
Smooth
Included Products 5302203
|
CX3499999
P3® 500 JCASS |
— 75 Ohm P3® Trunk and Distribution Cable, black PE jacket, flooded for underground
150T135 EMPTY DUCT COEX
— ConQuest® Empty Conduit, 1 1/2 in, SDR 13.5, terracotta
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: June 26, 2017
page 1 of 5 September 28, 2017
Product Specifications 5302203 | P3 P3® ® 500 JCASS
75 Ohm P3® Trunk and Distribution Cable, black PE jacket, flooded for underground
Product Classification Brand
P3®
Product Type
Coaxial hardline cable
Construction Materials Corrosion Protection
Migraheal®
Jacket Material
PE
Center Conductor Material
Copper-clad aluminum
Construction Type
Swaged
Dielectric Material
Foam PE
Outer Conductor Material
Aluminum
Dimensions Diameter Over Center Conductor, nominal 2.769 mm
|
0.109 in
Diameter Over Dielectric, nominal
11.481 mm
|
0.452 in
Diameter Over Outer Conductor, nominal
12.700 mm
|
0.500 in
Diameter Over Jacket, nominal
14.478 mm
|
0.570 in
Jacket Thickness, nominal
0.7620 mm
|
0.0300 in
Outer Conductor Thickness, nominal
0.6096 mm
|
0.0240 in
Cable Length
732 m
Shipping Weight
123.00 lb/kft
|
2400 ft
Electrical Specifications dc Resistance, Inner Conductor, nominal
1.35 ohms/kft
dc Resistance, Outer Conductor, nominal
0.37 ohms/kft
dc Resistance, Loop, nominal
1.72 ohms/kft
dc Resistance Note
Nominal values based on a standard condition of 20 °C (68 °F)
Capacitance
50.2 pF/m
Capacitance Tolerance
±1.0 pF/ft
Characteristic Impedance
75 ohm
Characteristic Impedance Tolerance
±2 ohm
Jacket Spark Test Voltage
5000 Vac
Nominal Velocity of Propagation (NVP)
87 %
Operating Frequency Band
1002–1218 MHz
Structural Return Loss
30 dB @ 5–1002 MHz
|
15.3 pF/ft
|
5–1002 MHz
Environmental Specifications Environmental Space
Buried
General Specifications ©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 7, 2017
page 2 of 5 September 28, 2017
Product Specifications 5302203 | P3 5302203 | P3® ® 500 JCASS
Cable Type
500 series
Brand
P3®
Jacket Color
Black
Packaging Type
Reel
Short Description
P3 500 JCASS SM PR997
Warranty
One year
Mechanical Specifications Minimum Bend Radius, bonded
88.90 mm
|
Pulling Tension, maximum
136 kg
300 lb
|
3.50 in
Electrical Performance Frequency 5 MHz 55 MHz 83 MHz 85 MHz 204 MHz 211 MHz 250 MHz 300 MHz 350 MHz 400 MHz 450 MHz 500 MHz 550 MHz 600 MHz 750 MHz 865 MHz 1000 MHz 1002 MHz 1300 MHz 1400 MHz 1500 MHz 1600 MHz 1700 MHz 1794 MHz 1800 MHz
Attenuation (dB/100 m) 0.52 1.77 2.17 2.23 3.51 3.58 3.94 4.30 4.69 5.02 5.35 5.67 5.97 6.27 7.09 7.68 8.27 8.33 2.95 3.09 10.55 10.97 11.38 11.76 11.78
Attenuation (dB/100 ft) 0.16 0.54 0.66 0.68 1.07 1.09 1.20 1.31 1.43 1.53 1.63 1.73 1.82 1.91 2.16 2.34 2.52 2.54 2.81 2.94 3.22 3.34 3.47 3.58 3.59
* Attenuation listed represents maximum values at standard condition of 20 °C (68 °F)
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU ISO 9001:2008
Classification Compliant Designed, manufactured and/or distributed under this quality management system
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: July 7, 2017
page 3 of 5 September 28, 2017
Product Specifications CX3499999 | 150T135 EMPTY DUCT COEX ConQuest® Empty Conduit, 1 1/2 in, SDR 13.5, terracotta
Product Classification Brand
ConQuest®
Product Type
Empty conduit
Dimensions Nominal Size
1-1/2 in
Wall Thickness Designation
SDR 13.5
Inner Diameter, nominal
40.589 mm
Length
914.40 m
Outer Diameter, nominal
48.260 mm
Wall Thickness, minimum
3.581 mm
Weight
344.0 lb/kft
| |
1.598 in 3000.00 ft
| |
1.900 in 0.141 in
General Specifications Color
Terracotta
Conduit Type
Non-toneable
Wall Type
Smooth
Brand
ConQuest®
Warranty
One year
Material Specifications Density Test Method
ASTM D792A
Density, maximum
0.955 g/cm³
Density, minimum
0.941 g/cm³
Design Standard
ASTM D3350-05
Environmental Stress Crack Resistance Failure rate of 10% within 96 hours Environmental Stress Test Method
ASTM D1693, ESCR Condition B
Flexural Modulus, minimum
552 N/mm² |
Flexural Property Test Method
ASTM D790
Hydrostatic Design Basis
Not pressure rated
Hydrostatic Design Test Method
ASTM D2837
Material Type
High density polyethylene (HDPE)
Melt Flow Rate Test Method
ASTM D1238
Melt Flow Rate, maximum
0.39 g/10 min
80000 psi
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: June 26, 2017
page 4 of 5 September 28, 2017
Product Specifications CX3499999 | 150T135 EMPTY DUCT COEX Tensile Property Test Method
ASTM D638
Tensile Strength at yield, minimum
21 N/mm² |
3000 psi
Mechanical Specifications Minimum Bend Radius, unsupported
508.0 mm
Pulling Tension, maximum
660.0 kg
| |
20.0 in 1455.0 lb
Regulatory Compliance/Certifications Agency ISO 9001:2008
Classification Designed, manufactured and/or distributed under this quality management system
* Footnotes Environmental Stress Crack Resistance ESCR—Environmental Stress Crack Resistence
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: June 26, 2017
page 5 of 5 September 28, 2017
