Transcript
Sony EMCS (Malaysia) Sdn. Bhd. Peripheral Device Business Group
Part No.: 00-1A02 Revision: 1.70 Issue Date: 19th September, 2007
PRODUCT SPECIFICATIONS of Multi-Card Reader / Writer (Internal)
MODEL NAME : MRW620-2
Product Specification MRW620-2
Part # 00-1A02 Revision 1.70
RECORDS OF REVISION Rev.
Issue Date
Pages
1.00
June 30th, 2005
All
Original Issue
1.10
th
Aug 29 , 2005
7
Change access lamp to green color
1.20
Sept 12th, 2005
6
Update media capacity
6
Add “ Do not remove media during access LED
nd
1.30
Sept 22 , 2005
1.40
th
Notes
activated “ statement. July 6 , 2006
5
Add Mac OS X 10.1.2 or later and Linux OS under Supported OS section.
th
1.50
Aug 14 , 2006
1.60
th
4&6 9
Feb 27 , 2007
5, 6, 10
Add additional supported media Add safety information Update with latest configuration -
Change USB cable from Mini B to 5 pin USB to 5 wires to 5 pin USB
1.70
th
Sept 19 , 2007
All
Date of Issue: 19th September, 2007
-
Change PWB size & PWB layer.
-
Front panel change
Rearrange document content
Page 2/12
Product Specification MRW620-2
Part # 00-1A02 Revision 1.70
Copyright Notice Copyright © 2005, SONY CORPORATION ALL RIGHTS RESERVED Trademark Acknowledgment MS-DOS and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. All other trademarks are property of their respective owners.
Disclaimer While we have made a reasonable effort to ensure the accuracy of this document, SONY CORPORATION shall not be held liable for any errors, which may appear in this document. SONY CORPORATION reserves the right to change the information contained herein as needed without notice.
WARNING !!! - Any wrong connection of connectors such as wrong pin assignments, shifted plug insertion or reversed connection causes permanent damage on the card reader and / or USB devices connected to the USB port, in the worst case it makes fire or smoke. Please make sure the pin assignments and plug connections at your main board. -
Caution : - When you use “Memory Stick Duo” on the product, please make sure to attach the media to a Memory Stick Duo Adaptor before inserting into the product. If you attempt to insert “Memory Stick Duo” into this product without attaching it to an adaptor, there is a possibility that the “Memory Stick Duo” cannot be pulled out. Please make sure to attach in right direction. - DO NOT insert multiple “Memory Stick” at same time. It might cause damage to the product. - When you use “Memory Stick Micro” on this product, please make sure to attach the media into M2 adaptor. If you attempt to insert “Memory Stick Micro” without attaching to M2 adaptor, there is a possibility that it cannot be pulled out. “Memory Stick Micro” may not operate properly when the media is put into Duo-size M2 adaptor and insert all together into Memory Stick Duo adaptor. Please use standard size of M2 adaptor for proper operations. - DO NOT insert other than Compact Flash or Microdrive into the Compact Flash slot. It might cause damage to the product.
Date of Issue: 19th September, 2007
Page 3/12
Product Specification MRW620-2
Part # 00-1A02 Revision 1.70
Index 1. Introduction
5
2. Features
5
3. Block Diagram
5
4. Appearance
6
5. Supported OS
6
6. Supported Media
7
7. Product Specifications
8
7.1 Mechanical Specifications
8
7.2 Electrical Specifications
8
7.3 Environment Specifications
9
7.4 Cable Specifications
10
7.5 Pin Assignment
11
7.6 Pin Position of Signal
11
8. Safety
11
9. Outline Dimension
12
Date of Issue: 19th September, 2007
Page 4/12
Product Specification MRW620-2
Part # 00-1A02 Revision 1.70
1. Introduction MRW620-2, a built-in unit for desktop PCs is able to read/write various memory card via USB2.0 High-Speed interface. (The detail of supported media is mentioned in the supported media table).
2. Features Following are main features of MRW620-2 model.
(1) Height and width are same with the size of the standard 1 inch FDD (H25.4mm x W101.6mm). It is possible to mount on an empty typical 3.5” bay.
(2) MRW620-2 works on Window Vista, Window XP, Windows 2000 SP4 or later and Windows Me without additional driver installation.
3. Block Diagram
H O S T
CompactFlashTM Connector
CompactFlashTM MicroDrive TM
SmartMedia TM Connector
SmartMedia TM xD Picture CardTM
CARD Interface TM
P C
Memory Stick Connector
SD Memory CardTM MultiMediaCardTM Connector
Date of Issue: 19th September, 2007
Memory StickTM (without MagicGate) MagicGate Memory StickTM Memory StickTM (with MagicGate) Memory Stick PROTM SD Memory CardTM MultiMediaCardTM
Page 5/12
Product Specification MRW620-2
Part # 00-1A02 Revision 1.70
4. Appearance
5. Supported OS ¾ Window Vista ¾ Windows XP ¾ Windows 2000 (SP4 or later) ¾ Windows Me
Date of Issue: 19th September, 2007
Page 6/12
Part # 00-1A02 Revision 1.70
Product Specification MRW620-2
6. Supported Media Media Memory Stick Memory Stick
TM
TM
Support
Tested with
(without MagicGate)
Read / Write *1
up to 128MB (up to 128 MB on spec)
(with MagicGate) *2
Read / Write *1
up to 128MB (up to 128 MB on spec) up to 128MB (up to 128 MB on spec) up to 128MB (up to 128 MB on spec) up to 128MB (up to 128 MB on spec) up to 128MB (up to 128 MB on spec)
MagicGate Memory Stick
TM *2
Read / Write *1
TM
(without MagicGate) *4
Read / Write *1
TM
(with MagicGate) *2
Read / Write *1
Memory Stick Duo Memory Stick Duo
MagicGate Memory Stick Duo Memory Stick PRO
*4
TM *2 *4
TM *2
Read / Write *1 Read / Write *1
TM *4
Read / Write *1
Memory Stick PRO Duo
TM *2 *4 *5
Memory Stick PRO-HG Duo
Read / Write *1
up to 4GB (up to 32GB on spec) up to 4GB (up to 32GB on spec) up to 4GB (up to 32GB on spec)
Memory Stick Micro (M2)
Read / Write *1
up to 1GB (up to 32GB on spec)
CompactFlash®
Read / Write *1
up to 4GB (up to 137 GB on spec)
Microdrive®
Read / Write *1
up to 6GB (up to 137 GB on spec) up to 128MB except 1M,2M Media (up to 128 MB on spec) up to 2GB (up to 2 GB on spec) up to 2GB (up to 2 GB on spec) up to 2GB (up to 2 GB on spec)
TM *2 *4
SmartMedia
TM
(3.3V Only)
xD-Picture CardTM TM *3
SD Memory Card
TM *3 *4
mini SD Card
MultiMediaCard RS-MMC
TM
TM
Read / Write *1 Read / Write *1 Read / Write *1 Read / Write *1 Read / Write
*1
Read / Write *1
up to 2GB (up to 2 GB on spec) up to 2GB (up to 2 GB on spec)
*1
Do not format Memory card on MRW620-2. The Memory card should be formatted by the digital camera or Audio player to assure the compatibility of the format. Do not remove media during access LED activated.
*2
Read/write of MagicGate data that uses MagicGate technology is not supported.
*3
Read/write of data that requires the SDMI function is not possible.
*4
This drive is able to handle with adapter.
*5
This drive is not compatible in speed.
Date of Issue: 19th September, 2007
Page 7/12
Part # 00-1A02 Revision 1.70
Product Specification MRW620-2
7. Product Specifications 7.1 Mechanical Specifications Description
Specification
Size (Excluding protrusion)
101.6 ± 0.5 mm (W) x 125.6 ± 0.5 mm (D) x 25.4 ± 0.5 mm (H)
Weight
140g (for reference) (with cable)
Front Panel Color
Mat Black / Ivory
7.2 Electrical Specifications Description
Specification
USB Specification
Hi-Speed USB (USB 2.0)
Power Supply Voltage
DC 4.75 V to 5.25 V (Bus-powered)
Current Consumption
500 mA (Max) *1
Access Lamp
Green color : usually lights off and blinks during access TM
*1 Except a case of using a Microdrive
Date of Issue: 19th September, 2007
Page 8/12
Part # 00-1A02 Revision 1.70
Product Specification MRW620-2
7.3 Environment Specifications Description
Operating
Non-operating
Temperature
5 to 40 °C
-30 to 60 °C
Relative Humidity
30 to 80 %RH
No condensation
MaximumWet Bulb Temperature
29 °C
Vibration *1 Sweep Time : 5.6 minutes Test time : 10 minutes (each direction) Orientation of Sweep : X, Y, Y’
9.8 m/s2 ( 10 to 200 Hz) (1.0G) 4.9 m/s2 (200 to 500 Hz) (0.5G)
Shock Orientation of Shock : X, Y, Y’
49 m/s2 (11 ms Half Sine) (5.0 G) TM
*1 Except a case of using a Microdrive
--------
19.6 m/s2 (10 to 500 Hz) (2.0G)
980 m/s2 (11ms Half Sine) (100G)
.
Shock
Vibration
Orientation Y
Orientation X
Orientation Y’
Orientation of Shock & Vibration
Date of Issue: 19th September, 2007
Page 9/12
Part # 00-1A02 Revision 1.70
Product Specification MRW620-2
7.4 Cable Specifications Specification Description Connector 5pin connector Housing : RE-05 (JST) or Equivalent Terminal : RF-SC2210 (JST) or Equivalent Cable Color : Ivory Cable Length : 570+50/0mm*1
USB Cable
*1 Cable measurement is from drive rear edge to housing as per below illustration.
Cable measurement
Date of Issue: 19th September, 2007
Page 10/12
Part # 00-1A02 Revision 1.70
Product Specification MRW620-2
7.5 Pin Assignment USB Cable : 5 Wires receptacle Connector Pin No.
Lead Wire 5 Pin Connector Signal name
Color
1
VCC
Red
1
2
-DATA
White
2
3
+DATA
Green
3
4
Ground Black
4
Plug Shell
Shield (Non Connection)
5
7.6 Pin Position of Signal
Pin 5 Pin 4 Pin 3 Pin 2 Pin 1
Housing
Cable Top View
8. Safety ¾ Safety Standard : UL / cUL, TÜV, ¾ EMC Standard : CE (EMC), IC, VCCI, C-tick, BSMI
Date of Issue: 19th September, 2007
Page 11/12
Product Specification MRW620-2
Part # 00-1A02 Revision 1.70
9. Outline Dimension
Date of Issue: 19th September, 2007
Page 12/12
