Transcript
Product Specifications FJ FJ--2SM 2SM--015A 015A--20M
HELIAX® FiberFeed® Discrete tail, Armored 6 mm furcation cable, DLC to DLC, 2 Single Mode Fibers, 20 m
Product Classification Portfolio
CommScope®
Brand
FiberFeed® |
Product Series
FJ
Product Type
Wireless Fiber Cable Assemblies
Regional Availability
Asia
|
HELIAX®
Australia/New Zealand
|
EMEA
|
Latin America
|
North America
Construction Materials Fiber Type
Bend insensitive singlemode fiber (G.657.A2)
Total Fibers, quantity
2
Jacket Color
Black
Dimensions Cord Length
20.00 m
|
65.62 ft
Environmental Specifications Operating Temperature
-40 °C to +70 °C (-40 °F to +158 °F)
General Specifications Construction Type
Discrete fiber tail
Interface Body Style, connector A
Straight
Interface Body Style, connector B
Straight
Interface Feature, connector A
Standard
Interface Feature, connector B
Standard
Interface, connector A
DLC
Interface, connector B
DLC
Minimum Bend Radius, furcation
61.0 mm | 2.4 in
Optical Performance Insertion Loss, maximum
0.50 dB
Insertion Loss, maximum note
Insertion loss is measured at 1310, 1385, and 1550 MHz
Insertion Loss, maximum, connector A and B 0.50 dB
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU ISO 9001:2008
Classification Compliant Designed, manufactured and/or distributed under this quality management system
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: September 12, 2017
page 1 of 4 September 29, 2017
Product Specifications FJ FJ--2SM 2SM--015A 015A--20M
Included Products 760199745
|
Z-002-MP-8G-F25BK
(Product Component—not orderable)
— Indoor/Outdoor Low Smoke Zero Halogen
Riser MPO Trunk Cable, 2 fiber l
CS-8G-MP (Product Component—not orderable) — Enhanced Low Macrobending, Zero Water Peak, Dispersion-Unshifted Singlemode Fiber (ITU-T G.657.A2, B2)
* Footnotes Insertion Loss, maximum, connector A and B Insertion loss is measured at a room temp of +20°C (+68°F)
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: September 12, 2017
page 2 of 4 September 29, 2017
Product Specifications 760199745 | Z-002 002--MP MP--8G 8G--F25BK
Indoor/Outdoor Low Smoke Zero Halogen Riser MPO Trunk Cable, 2 fiber
Representative Image General Specifications Cable Type
MPO trunk cable
Construction Type
Non-armored
Subunit Type
Gel-free
Construction Materials Fiber Type Solution
Bend insensitive singlemode fiber (G.657.A2/B2)
Total Fiber Count
2
Fiber Type
Bend insensitive singlemode fiber (G.657.A2/B2)
Fiber Type, quantity
2
Fibers per Subunit, quantity
2
Jacket Color
Black
Jacket UV Resistance
UV stabilized
Dimensions Cable Weight
4.2 lb/kft | 6.3 kg/km
Diameter Over Jacket
2.50 mm | 0.10 in
Physical Specifications Minimum Bend Radius, loaded
5.0 cm | 2.0 in
Minimum Bend Radius, unloaded
3.0 cm | 1.2 in
Tensile Load, long term, maximum
400 N
|
Tensile Load, short term, maximum 120 N
|
Vertical Rise, maximum
500.0 m
90 lbf 27 lbf |
1640.4 ft
Flame Test Specifications Flame Test Listing
NEC OFNR-LS (ETL) and c(ETL)
Flame Test Method
IEC 60332-3
|
IEC 60754-2
|
IEC 61034-2
|
IEEE 383
|
UL 1666
|
UL 1685
Environmental Specifications Environmental Space
Low Smoke Zero Halogen (LSZH)
|
Installation Temperature
0 °C to +60 °C (+32 °F to +140 °F)
Operating Temperature
0 °C to +70 °C (+32 °F to +158 °F)
Storage Temperature
-40 °C to +70 °C (-40 °F to +158 °F)
Riser
Mechanical Test Specifications Compression
10 N/mm | 57 lb/in
Compression Test Method
FOTP-41
Flex
300 cycles
|
IEC 60794-1 E3
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2017
page 3 of 4 September 29, 2017
Product Specifications 760199745 | Z 760199745 | Z--002 002--MP MP--8G 8G--F25BK
Flex Test Method
FOTP-104
Impact
2.17 ft lb
|
|
2.94 N-m
IEC 60794-1 E6
Impact Test Method
FOTP-25
|
IEC 60794-1 E4
Strain
See long and short term tensile loads
Strain Test Method
FOTP-33
Twist
10 cycles
Twist Test Method
FOTP-85
Water Penentration
24 h
Water Penentration Test Method
FOTP-82
|
IEC 60794-1 E1
|
IEC 60794-1 E7
|
IEC 60794-1 F5
Environmental Test Specifications Cable Freeze Test Method
IEC 60794-1 F15
Heat Age
0 °C to +85 °C (+32 °F to +185 °F)
Heat Age Test Method
IEC 60794-1 F9
Low High Bend
0 °C to +70 °C (+32 °F to +158 °F)
Low High Bend Test Method
FOTP-37
Temperature Cycle
0 °C to +70 °C (+32 °F to +158 °F)
Temperature Cycle Test Method
FOTP-3
| |
IEC 60794-1 E11 IEC 60794-1 F1
Qualification Specifications Cable Qualification Standards
ANSI/ICEA S-104-696
|
Telcordia GR-20 (water penetration)
|
Telcordia GR-409
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU ISO 9001:2008
Classification Compliant Designed, manufactured and/or distributed under this quality management system
Included Products CS-8G-MP (Product Component—not orderable) Singlemode Fiber (ITU-T G.657.A2, B2)
— Enhanced Low Macrobending, Zero Water Peak, Dispersion-Unshifted
* Footnotes Operating Temperature Specification applicable to non-terminated bulk fiber cable
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2017
page 4 of 4 September 29, 2017
