Transcript
Product Specifications F2P43A F2P43A--PDMDM PDMDM--5M 5M--X
FSJ2P-50 SureFlex® Jumper with interface types 7-16 DIN Male and 7-16 DIN Male, 5 m
Product Classification Brand
HELIAX® |
SureFlex®
Product Type
Wireless transmission cable assembly
General Specifications Body Style, Connector A
Straight
Body Style, Connector B
Straight
Cable Family
FSJ2-50
Interface, Connector A
7-16 DIN Male
Interface, Connector B
7-16 DIN Male
Length
5.000 m
Nominal Size
3/8 in
Attachment, Connector B
Field attachment
|
16.404 ft
Specification Sheet Revision Level A
Jumper Assembly Sample Label
Return Loss/VSWR Frequency Band 806–960 MHz 1427–1535 MHz 1700–2300 MHz
VSWR 1.15 1.15 1.15
Return Loss (dB) 23.13 23.13 23.13
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 11364-2006 ISO 9001:2008
Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: September 25, 2017
page 1 of 5 October 18, 2017
Product Specifications F2P43A F2P43A--PDMDM PDMDM--5M 5M--X
Included Products F2TDM-PL
— 7-16 DIN Male Positive Lock for 3/8 in FSJ2-50 cable
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: September 25, 2017
page 2 of 5 October 18, 2017
Product Specifications F2TDM F2TDM--PL
7-16 DIN Male Positive Lock for 3/8 in FSJ2-50 cable
General Specifications Interface
7-16 DIN Male
Body Style
Straight
Brand
HELIAX®
Mounting Angle
Straight
Electrical Specifications Connector Impedance
50 ohm
Operating Frequency Band
0 – 8000 MHz
Cable Impedance
50 ohm
3rd Order IMD, typical
-97 dBm @ 910 MHz
3rd Order IMD Test Method
Two +43 dBm carriers
RF Operating Voltage, maximum (vrms)
813.00 V
dc Test Voltage
2300 V
Outer Contact Resistance, maximum
1.50 mOhm
Inner Contact Resistance, maximum
0.40 mOhm
Insulation Resistance, minimum
10000 MOhm
Average Power
0.7 kW @ 900 MHz
Peak Power, maximum
13.20 kW
Insertion Loss, typical
0.05 dB
Shielding Effectiveness
-110 dB
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2017
page 3 of 5 October 18, 2017
Product Specifications F2TDM F2TDM--PL
Outline Drawing
Mechanical Specifications Outer Contact Attachment Method
Crush-flare
Inner Contact Attachment Method
Captivated
Outer Contact Plating
Trimetal
Inner Contact Plating
Silver
Interface Durability
500 cycles
Interface Durability Method
IEC 61169-4:17
Connector Retention Tensile Force
670 N
Connector Retention Torque
2.70 N-m | 1.99 ft lb
Insertion Force
200.00 N
Insertion Force Method
IEC 61169-1:15.2.4
Pressurizable
No
Coupling Nut Proof Torque
35.00 N-m
|
25.81 ft lb
Coupling Nut Retention Force
1000.00 N
|
224.81 lbf
Coupling Nut Retention Force Method
MIL-C-39012C-3.25, 4.6.22
|
151 lbf |
44.96 lbf
Dimensions Nominal Size
3/8 in
Diameter
34.60 mm
|
1.36 in
Height
34.60 mm
|
1.36 in
Length
55.20 mm
|
Weight
133.03 g
Width
34.60 mm
|
2.17 in 0.29 lb
|
1.36 in
Environmental Specifications Operating Temperature
-55 °C to +85 °C (-67 °F to +185 °F)
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2017
page 4 of 5 October 18, 2017
Product Specifications F2TDM F2TDM--PL Storage Temperature
-65 °C to +125 °C (-85 °F to +257 °F)
Immersion Depth
1m
Immersion Test Mating
Mated
Immersion Test Method
IEC 60529:2001, IP68
Moisture Resistance Test Method
IEC 60068-2-3
Mechanical Shock Test Method
IEC 60068-2-27
Thermal Shock Test Method
IEC 60068-2-14
Vibration Test Method
IEC 60068-2-6
Corrosion Test Method
IEC 60068-2-11
Standard Conditions Attenuation, Ambient Temperature
20 °C
|
Average Power, Ambient Temperature
40 °C
|
Average Power, Inner Conductor Temperature 100 °C
68 °F 104 °F |
212 °F
Return Loss/VSWR Frequency Band 0–960 MHz 960–2200 MHz 2200–2700 MHz 2700–4000 MHz 4000–6000 MHz 6000–8000 MHz
VSWR 1.03 1.06 1.08 1.08 1.29 1.38
Return Loss (dB) 37.60 30.80 28.50 28.40 18.00 16.00
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU China RoHS SJ/T 11364-2006 ISO 9001:2008
Classification Compliant by Exemption Above Maximum Concentration Value (MCV) Designed, manufactured and/or distributed under this quality management system
* Footnotes Immersion Depth
Immersion at specified depth for 24 hours
Insertion Loss, typical
0.05v¯freq (GHz) (not applicable for elliptical waveguide)
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2017
page 5 of 5 October 18, 2017
