Transcript
Product Specifications E11F02P85
Twin Quadplexer 700-800//900//1800//2100-2600 MHz, dc bypass on port 4 l
Industry leading PIM performance
l
Designed for network modernization application, introduction of LTE700 and LTE800 on existing site
l
Twin configuration
l
Suitable for feeders cables reduction
General Specifications Product Type
Quadplexer
Modularity
2-Twin
Includes
Mounting hardware
Electrical Specifications Sub-module
1|2
1|2
1|2
1|2
Branch
1
2
3
4
Port Designation
PORT 1 694-862
PORT 2 880-960
PORT 3 1710-1880
PORT 4 1920-2170 23002690
License Band
APT 700 CEL 850 EDD 800 LMR 800
CEL 900 LMR 900
DCS 1800
IMT 2600 IMT 2100 TDD 2300
Electrical Specifications, Band Pass Frequency Range
694–862 MHz
880–960 MHz
1710–1880 MHz
2300–2690 MHz 1920–2170 MHz
Insertion Loss, maximum
0.50 dB
0.50 dB
0.50 dB
0.50 dB
Insertion Loss, typical
0.40 dB
0.40 dB
0.35 dB
0.38 dB
Return Loss, minimum
20 dB
20 dB
20 dB
20 dB
Return Loss, typical
22 dB
22 dB
22 dB
22 dB
Isolation, minimum
50 dB
50 dB
50 dB
50 dB
Input Power, RMS, maximum
300 W
300 W
300 W
300 W
3rd Order PIM, maximum
-160 dBc
-160 dBc
-160 dBc
-160 dBc
Two +43 dBm carriers
Two +43 dBm carriers
Two +43 dBm carriers
Two +43 dBm 3rd Order PIM Test Method carriers
AISG Electrical Specifications AISG Carrier
2176 KHz ± 100 ppm
Insertion Loss, maximum
1.00 dB
Return Loss, minimum
10 dB
dc Power/Alarm Electrical Specifications dc/AISG Pass-through, combiner
Branch 4
dc/AISG Pass-through, demultiplexer Branch 4
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 21, 2017
page 1 of 4 September 15, 2017
Product Specifications E11F02P85
Lightning Surge Current
5 kA
Lightning Surge Current Waveform
8/20 waveform
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 21, 2017
page 2 of 4 September 15, 2017
Product Specifications E11F02P85
Block Diagram
Mechanical Specifications RF Connector Interface
7-16 DIN Female
RF Connector Interface Body Style
Medium neck
Color
Gray
Mount Type
Pole
Mounting Pipe Diameter
42.6–122 mm
Mounting Pipe Hardware
Band clamps (2)
Wind Speed, maximum
60 m/s
|
Wall
Dimensions Height
263.0 mm
|
10.4 in
Width
328.0 mm
|
12.9 in
Depth
130.5 mm | 5.1 in
Weight
10.4 kg
|
22.9 lb
Environmental Specifications Operating Temperature
-40 °C to +65 °C (-40 °F to +149 °F)
Relative Humidity
15%–100%
Ingress Protection Test Method
IEC 60529:2001, IP67
Vibration Test Method
IEC 60068-2-6
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 21, 2017
page 3 of 4 September 15, 2017
Product Specifications E11F02P85
Outline Drawing
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 21, 2017
page 4 of 4 September 15, 2017
