Transcript
Product Specifications E2O540JCASS E2O540JCASS--12.7MB DUCT E2O® Coaxial/Microduct Hybrid Buried Cable l
E 2 O is a solution that enables service providers the ability to bridge HFC networks to FTTx. The E2 O composite coaxial/fiber product line combines fiber, microducts, and coaxial cable under one jacket.
l
Serves businesses in a new commercial serving area
l
Mitigates future cost of fiber installation
l
Saves on initial installation due to “single sheath” vs. multiple sheaths
l
Ideal for commercial data customers that also require video
l
All products tested to industry standards
Dimensions Height
29.718 mm
Outer Jacket Thickness, nominal 0.762 mm
| |
Shipping Weight
171.00 lb/kft
Width
17.018 mm
1.170 in 0.030 in
|
0.670 in
Environmental Specifications Environmental Space
Buried
General Specifications Cable Series
QR 540
Brand
E 2 O®
Material Specifications Outer Jacket Material
Medium density polyethylene MDPE
Ripcord Material
Polyester
Mechanical Specifications Minimum Bend Radius
152.40 mm
Pulling Tension, maximum
86 kg
|
|
6.00 in
190 lb
Regulatory Compliance/Certifications Agency ISO 9001:2008
Classification Designed, manufactured and/or distributed under this quality management system
Included Products 5510192 | QR® 540 JCASS (Product Component—not orderable) PE jacket, flooded for underground
— 75 Ohm QR® Trunk and Distribution Cable, black
360000000
|
12.7MB DUCT EMPTY
— ConQuest® Empty Conduit, 12.7 mm, black
360000013
|
12.7MB DUCT EMPTY
— ConQuest® Empty Conduit, 12.7 mm, black
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 19, 2017
page 1 of 5 October 18, 2017
Product Specifications 5510192 | QR QR® ® 540 JCASS
75 Ohm QR® Trunk and Distribution Cable, black PE jacket, flooded for underground
Product Classification Brand
QR®
Product Type
Coaxial hardline cable
Construction Materials Corrosion Protection
Migraheal®
Jacket Material
PE
Center Conductor Material
Copper-clad aluminum
Construction Type
Welded
Dielectric Material
Foam PE
Outer Conductor Material
Aluminum
Dimensions Diameter Over Center Conductor, nominal 3.150 mm
|
0.124 in
Diameter Over Dielectric, nominal
13.056 mm
|
0.514 in
Diameter Over Outer Conductor, nominal
13.716 mm
|
0.540 in
Diameter Over Jacket, nominal
15.494 mm
|
0.610 in
Jacket Thickness, nominal
0.8890 mm
|
0.0350 in
Outer Conductor Thickness, nominal
0.3429 mm
|
0.0135 in
Cable Length
1128 m
Shipping Weight
120.00 lb/kft
|
3700 ft
Electrical Specifications dc Resistance, Inner Conductor, nominal
1.02 ohms/kft
dc Resistance, Outer Conductor, nominal
0.59 ohms/kft
dc Resistance, Loop, nominal
1.61 ohms/kft
dc Resistance Note
Nominal values based on a standard condition of 20 °C (68 °F)
Capacitance
50.2 pF/m
Capacitance Tolerance
±1.0 pF/ft
Characteristic Impedance
75 ohm
Characteristic Impedance Tolerance
±2 ohm
Jacket Spark Test Voltage
5000 Vac
Nominal Velocity of Propagation (NVP)
88 %
Operating Frequency Band
1002–1218 MHz
Structural Return Loss
30 dB @ 5–1002 MHz
|
15.3 pF/ft
|
5–1002 MHz
Environmental Specifications Environmental Space
Buried
General Specifications ©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: September 5, 2017
page 2 of 5 October 18, 2017
Product Specifications 5510192 | QR 5510192 | QR® ® 540 JCASS
Cable Type
540 series
Brand
QR®
Jacket Color
Black
Packaging Type
Reel
Short Description
QR 540 JCASS SM PR2171
Mechanical Specifications Pulling Tension, maximum
100 kg
|
220 lb
Electrical Performance Frequency 5 MHz 55 MHz 83 MHz 85 MHz 204 MHz 211 MHz 250 MHz 300 MHz 350 MHz 400 MHz 450 MHz 500 MHz 550 MHz 600 MHz 750 MHz 865 MHz 1000 MHz 1002 MHz 1218 MHz 1300 MHz 1400 MHz 1500 MHz 1600 MHz 1700 MHz 1794 MHz 1800 MHz
Attenuation (dB/100 m) 0.46 1.56 1.90 1.94 3.05 3.12 3.38 3.71 4.04 4.33 4.59 4.89 5.12 5.38 6.07 6.56 7.12 7.13 8.05 8.34 8.68 9.01 9.34 9.65 9.94 9.96
Attenuation (dB/100 ft) 0.14 0.48 0.58 0.59 0.93 0.95 1.03 1.13 1.23 1.32 1.40 1.49 1.56 1.64 1.85 2.00 2.17 2.17 2.45 2.54 2.65 2.75 2.85 2.94 3.03 3.04
* Attenuation listed represents maximum values at standard condition of 20 °C (68 °F)
Regulatory Compliance/Certifications Agency RoHS 2011/65/EU ISO 9001:2008
Classification Compliant Designed, manufactured and/or distributed under this quality management system
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: September 5, 2017
page 3 of 5 October 18, 2017
Product Specifications 360000000 | 12.7MB DUCT EMPTY ConQuest® Empty Conduit, 12.7 mm, black
OBSOLETE Replaced By
360000013 12.7MB DUCT EMPTY
ConQuest® Empty Conduit, 12.7 mm, black
Product Classification Brand
ConQuest®
Product Type
Empty conduit
Dimensions Nominal Size
12.7 mm
Inner Diameter, nominal
10.008 mm
|
0.394 in
Outer Diameter, nominal
12.700 mm
|
0.500 in
Wall Thickness, minimum
1.346 mm
Weight
31.0 lb/kft
|
0.053 in
General Specifications Color
Black
Conduit Type
Non-toneable
Wall Type
Smooth
Brand
ConQuest®
Warranty
One year
Material Specifications Density Test Method
ASTM D792A
Density, maximum
0.955 g/cm³
Density, minimum
0.941 g/cm³
Design Standard
ASTM D3350-05
Environmental Stress Crack Resistance Failure rate of 10% within 96 hours Environmental Stress Test Method
ASTM D1693, ESCR Condition B
Flexural Modulus, minimum
552 N/mm² |
Flexural Property Test Method
ASTM D790
Hydrostatic Design Basis
Not pressure rated
80000 psi
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: September 21, 2017
page 4 of 5 October 18, 2017
Product Specifications 360000000 | 12.7MB DUCT EMPTY Hydrostatic Design Test Method
ASTM D2837
Material Type
High density polyethylene (HDPE)
Melt Flow Rate Test Method
ASTM D1238
Melt Flow Rate, maximum
0.39 g/10 min
Tensile Property Test Method
ASTM D638
Tensile Strength at yield, minimum
21 N/mm² |
3000 psi
Mechanical Specifications Minimum Bend Radius, unsupported
152.4 mm | 6.0 in
Pulling Tension, maximum
86.2 kg
|
190.0 lb
Regulatory Compliance/Certifications Agency ISO 9001:2008
Classification Designed, manufactured and/or distributed under this quality management system
* Footnotes Environmental Stress Crack Resistance ESCR—Environmental Stress Crack Resistence
©2017 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: September 21, 2017
page 5 of 5 October 18, 2017
