Transcript
Product Specifications 760169052 | CM CM--7024A
Fast Ethernet L2 Switch, 24 ports, 100 BaseTX, PoE, two uplink module slots
Electrical Specifications Power Consumption, maximum
318.5 W
Power Frequency
50/60 Hz
Voltage Range
110–220 Vac
Environmental Specifications Operating Temperature
0 °C to +50 °C (+32 °F to +122 °F)
Relative Humidity
5%–95%, noncondensing
Mechanical Specifications User Interface Standard
IEEE 802.3 (10/100 BaseTX)
User Interface, quantity
24
Console Interface
RS232
Console Interface, quantity
1
Uplink Module Slot Interface
EPON
Uplink Module Slots, quantity
2
Uplink Modules
Not included
User Interface
RJ45
User Interface at Full PoE Load, quantity
17
| |
|
IEEE 802.3af (PoE)
RJ45 1000 BaseTX
|
1000 BaseX
Functional Specifications Flash Memory
32 MB
Internet Protocol
IPv6 enabled
Main Memory
128 MB
Switching Fabric Performance
12.80 Gb/s
Switching Fabric Type
Nonblocking
System Throughput Performance, maximum 6.50 Mp/s System Throughput Type
Wirespeed L2 switching
General Specifications Installation Location
Rack
Application
Indoor
Catalog Number
PONONU13123D
Rack Type
EIA 19 in
Rack Units
1
Warranty
One year
Dimensions ©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 16, 2016
page 1 of 2 April 30, 2016
Product Specifications 760169052 | CM 760169052 | CM--7024A
Height
44.00 mm
Length
360.00 mm
Net Weight
7.00 kg
Width
482.60 mm
|
|
1.73 in |
14.17 in
15.43 lb |
19.00 in
Regulatory Compliance/Certifications Agency ISO 9001:2008
Classification Designed, manufactured and/or distributed under this quality management system
©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 16, 2016
page 2 of 2 April 30, 2016
