Product Specifications 810008827/db 810008827/db    |       |    O

Transcript

Product Specifications 810008827/DB    |    O-198 198--LA LA--8W 8W--F12NS/25T Single Jacket/Single Armor, Gel­Filled, Outdoor Stranded Loose Tube Cable   l Corrugated steel tape armor is strong yet flexible, providing additional crush and  rodent protection   Representative Image       General Specifications Cable Type  Stranded loose tube  Construction Type  Armored  Subunit Type  Gel­filled    Construction Materials Fiber Type Solution  LightScope® ZWP®, zero water peak singlemode fiber (G.652.D, G.657.A1)  Jacket Material  PE  Total Fiber Count  198  Armor Type  Corrugated steel  Fiber Type  LightScope® ZWP®, zero water peak singlemode fiber (G.652.D, G.657.A1)  Fiber Type, quantity  198  Fibers per Subunit, quantity  12  Jacket Color  Black  Jacket UV Resistance  UV stabilized    Dimensions Buffer Tube/Subunit Diameter  2.50 mm | 0.10 in  Cable Weight  153.0 lb/kft Diameter Over Jacket  17.20 mm Filler, quantity  1  Subunit, quantity  17  | | 228.0 kg/km  0.68 in    Physical Specifications ©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 16, 2016 page 1 of 3 April 14, 2016 Product Specifications 810008827/DB   |   O 810008827/DB   |   O--198 198--LA LA--8W 8W--F12NS/25T Minimum Bend Radius, loaded  25.7 cm Minimum Bend Radius, unloaded  17.2 cm | 6.8 in  | Tensile Load, long term, maximum  180 lbf | Tensile Load, short term, maximum  2700 N | Vertical Rise, maximum  10.1 in  800 N  607 lbf  1176.0 ft | 358.0 m    Environmental Specifications Environmental Space  Aerial, lashed | Buried  Installation Temperature  ­30 °C to +70 °C (­22 °F to +158 °F)  Operating Temperature  ­40 °C to +70 °C (­40 °F to +158 °F)  Storage Temperature  ­40 °C to +75 °C (­40 °F to +167 °F)    Mechanical Test Specifications Compression  250 lb/in | 44 N/mm  Compression Test Method  FOTP­41 Flex  35 cycles  Flex Test Method  FOTP­104 Impact  4.34 ft lb | 5.88 N­m  Impact Test Method  FOTP­25 | IEC 60794­1 E4  Strain  See long and short term tensile loads  Strain Test Method  FOTP­33 Twist  10 cycles  Twist Test Method  FOTP­85 Water Penentration  24 h  Water Penentration Test Method  FOTP­82 | IEC 60794­1 E3  | IEC 60794­1 E6  | IEC 60794­1 E1  | IEC 60794­1 E7  | IEC 60794­1 F5    Environmental Test Specifications Cable Freeze  ­2 °C Cable Freeze Test Method  FOTP­98 | 28 °F  Drip  70 °C Drip Test Method  FOTP­81 Heat Age  ­40 °C to +85 °C (­40 °F to +185 °F)  Heat Age Test Method  IEC 60794­1 F9  Low High Bend  ­30 °C to +60 °C (­22 °F to +140 °F)  Low High Bend Test Method  FOTP­37 Temperature Cycle  ­40 °C to +70 °C (­40 °F to +158 °F)  Temperature Cycle Test Method  FOTP­3 | | IEC 60794­1 F15  158 °F  | | | IEC 60794­1 E14  IEC 60794­1 E11  IEC 60794­1 F1    Qualification Specifications Cable Qualification Standards  ANSI/ICEA S­87­640 | EN 187105 | Telcordia GR­20  Regulatory Compliance/Certifications Agency RoHS 2011/65/EU ISO 9001:2008 Classification Compliant Designed, manufactured and/or distributed under this quality management system ©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 16, 2016 page 2 of 3 April 14, 2016 Product Specifications 810008827/DB   |   O 810008827/DB   |   O--198 198--LA LA--8W 8W--F12NS/25T Included Products DB­8W­LT   (Product Component—not orderable)  — LightScope ZWP® Singlemode Fiber  ©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 16, 2016 page 3 of 3 April 14, 2016