Product Specifications 8108200/db 8108200/db    |       |    O

Transcript

Product Specifications 8108200/DB    |    O-006 006--DF DF--HY HY--F06NS/8W006/1X24AWG Fiber + Tone Wire Outdoor Drop Cable, 1–12 fiber Arid Core construction, central loose  tube   Representative Image       General Specifications Cable Type  Central loose tube  Construction Type  Non­armored  Subunit Type  Gel­filled  Tone Wire Gauge  24 AWG  Tone Wire Type  Copper  Tone Wire, quantity  1    Construction Materials Fiber Type Solution  LightScope® ZWP®, zero water peak singlemode fiber (G.652.D, G.657.A1)  Total Fiber Count  6  Fiber Type  LightScope® ZWP®, zero water peak singlemode fiber (G.652.D, G.657.A1)  Fiber Type, quantity  6  Fibers per Subunit, quantity  6  Jacket Color  Black  Jacket UV Resistance  UV stabilized    Dimensions Buffer Tube/Subunit Diameter  2.00 mm | 0.08 in  Cable Weight  33.0 lb/kft | 49.0 kg/km  Diameter Over Jacket  10.20 mm | 0.40 in  Diameter Over Messenger Jacket  2.00 mm | 0.08 in  Height Over Jacket  4.50 mm | 0.18 in  Subunit, quantity  1    ©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 16, 2016 page 1 of 3 May 5, 2016 Product Specifications 8108200/DB   |   O 8108200/DB   |   O--006 006--DF DF--HY HY--F06NS/8W006/1X24AWG   Physical Specifications Minimum Bend Radius, loaded  9.0 cm | 3.5 in  Minimum Bend Radius, unloaded  8.1 cm | 3.2 in  Tensile Load, long term, maximum  400 N | Tensile Load, short term, maximum  1334 N Vertical Rise, maximum  90 lbf  | 300 lbf  2752.0 ft | 839.0 m    Environmental Specifications Environmental Space  Aerial, lashed  Installation Temperature  ­30 °C to +70 °C (­22 °F to +158 °F)  Operating Temperature  ­40 °C to +70 °C (­40 °F to +158 °F)  Storage Temperature  ­40 °C to +75 °C (­40 °F to +167 °F)    Mechanical Test Specifications Compression  10 N/mm | 57 lb/in  Compression Test Method  FOTP­41 Flex  35 cycles  Flex Test Method  FOTP­104 Impact  2.17 ft lb | 2.94 N­m  Impact Test Method  FOTP­25 | IEC 60794­1 E4  Strain  See long and short term tensile loads  Strain Test Method  FOTP­33 Twist  10 cycles  Twist Test Method  FOTP­85 Water Penentration  24 h  Water Penentration Test Method  FOTP­82 | IEC 60794­1 E3  | IEC 60794­1 E6  | IEC 60794­1 E1  | IEC 60794­1 E7  | IEC 60794­1 F5    Environmental Test Specifications Cable Freeze  ­2 °C Cable Freeze Test Method  FOTP­98 | 28 °F  | Drip  70 °C 158 °F  Drip Test Method  FOTP­81 Heat Age  ­40 °C to +85 °C (­40 °F to +185 °F)  Heat Age Test Method  IEC 60794­1 F9  Low High Bend  ­30 °C to +60 °C (­22 °F to +140 °F)  Low High Bend Test Method  FOTP­37 Temperature Cycle  ­40 °C to +70 °C (­40 °F to +158 °F)  Temperature Cycle Test Method  FOTP­3 | | | | IEC 60794­1 F15  IEC 60794­1 E14  IEC 60794­1 E11  IEC 60794­1 F1    Qualification Specifications Cable Qualification Standards  ANSI/ICEA S­110­717  Regulatory Compliance/Certifications ©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 16, 2016 page 2 of 3 May 5, 2016 Product Specifications 8108200/DB   |   O 8108200/DB   |   O--006 006--DF DF--HY HY--F06NS/8W006/1X24AWG Agency RoHS 2011/65/EU ISO 9001:2008 Classification Compliant Designed, manufactured and/or distributed under this quality management system Included Products DB­8W­LT   (Product Component—not orderable)  — LightScope ZWP® Singlemode Fiber  ©2016 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: January 16, 2016 page 3 of 3 May 5, 2016