Transcript
Product User Guide
800 Yards Remote Control Dog Training Manual And Automatic Collar 1
Parts List What’s In The Box
Remote Control
USB Charger
Collar & Receiver
Test Light
2
Useing The Remote
Screen Power Switcher Vibration
Universal
Static
Charging Port
Channel
Voice
Down button
Up button
3
Instructions Application Step: Firstly open the remote(touch the “Power”button ). Secondly open the receiver(touch the power key),and you will hear “Beep” Thirdly touch the “Vibration” or “Static” button on the remote,and you will hear “Beep” Congratulation you pair the pruduct successfully.Use the test light to test the shock.The sensitivity of the vibration transferred to the maximum, and then gently frict "test"to test the vibration. 4
Product Features Manual automatic switch to each other. 4 in 1 remote control dog training collar. LCD digital display for instruction. 4 modes including shock,vibrate,sound and automation. Free combination among Tone, vibration and stimulation. 7 adjustable levels of shock and vibration. Rechargeable remote controller and receiver. Waterproof receiver. 800 Yards remote control distance inoptimal conditions. CE/FCC & RoHS certificate
Note: The shock function on this collar is suitable for medium and large dogs. Please don't try it on small dogs(4 months). We also advise to use low(level one) level shock on medium or large breed first. The collar and remote will power off automatically to save battery power if no motion or movement is detected for approx. 1-2 minutes. A gentle motion or movement will activate the receiver and a one-second press on the menu button will wake the remote from sleep mode 5
Charging the Remote and Receiver Both the Remote Control and Receiver (the receiver is the black plastic device connected to the collar) use lithium batteries that can be recharged. For best results, please charge the remote and the receiver for half an hour each before using the first time. There are 4 bars to show the battery power level. 4 bars means the remote is fully charged. Empty means that the production should be recharged. To charge the Remote, since this is a USB charger, you can charge the remote from a computer, or you can charge it from a wall outlet. To charge the Receiver, simply open the protective rubber cover and insert the charger into the charging hole. Note: The same charger is used to charge both the remote and the receiver. When charging, a red LED light will blink on the receiver to indicate that it is being charged correctly. When the receiver is fully charged, the light will turn off..
Note: Don't wait for transmitter doesn't have any electricity to recharge, receiver suggested charging every week, it can prolong the service life of batteries. 6
Automatic mode Before the conversion to automatic mode, according to the dog's reaction conditions to choose the appropriate shock and vibration model, and then switch to automatic mode. Automatic mode have level 1-7, the sensitivity of the appropriate adjustments according to actual situation. Electric shock/vibration adjustment method: Click the "static"/" vibration "button, you will see the"static"/"vibration" icon is flashing, and then use the" + "/" - "to adjust the gear, and then press the"switch"button to confirm. Sensitivity to adjust: Select automatic mode, then use the "+"/" - "which can adjust the sensitivity, and then press the "switch" key to confirm.(high level corresponding the high sensitivity) 7
•Using 2 Collars •One remote can be used to control two separate collars. Follow the syncing steps above if you wish to sync another collar, for up to two dogs. Select Channel "1" or Channel "2" to control each collar individually. •Sleep Mode •To save on battery life, the remote and receiver are programmed to enter Sleep Mode if they don't sense any movement or activity for a certain period of time. •The remote will enter sleep mode if there is no activity for one and a half minutes. To wake the remote from sleep mode, simply press the Power Button, or press the Menu Button. •The receiver will enter sleep mode if there is no movement from the collar for one minute. To wake the receiver from sleep mode, simply touch or move the Receiver. •Protection Mode: •In the condition of automatic mode, machine vibration and shock more than 5 times in a row, then the machine above the red light and green light will flash, machine has entered automatically protection mode. You can press the "switch"/"static"/"vibration"/"voice" to out of the protection mode or you can waite for 1 min it will out automaticlly.
8
