Products Catalogue - Lumiring Technology

Transcript

PRODUCTS CATALOGUE Сontents 2 3 Lumiring Technology Limited 4 Introduction of Lumiring Standalone ACS 8 Readers 14 Standalone systems 21 Accessories 30 Appendix A. Connection diagram Lumiring Technology Limited is a professional research and development company. Our main stage its devices for security market. We always try offer to our customers only new and creative solution for fully meet their demand. Each our device its many years’ experience of our engineers, continuous improvements and developing to meet and exceed the market demand for similar products. Our main products its solutions for access control and alarm systems markets. Core team of Lumiring Technology Limited have many years of electronics, security, IT systems design, development, manufacturing, project implementation and business operations experience, speed up the development of each product independently tested every electronic materials, selection, procurement are carefully selected, each component of the process we have in-depth consideration from electronic circuit diagram and PCB design to design 3D model of the molding. We pay attention to each step of develop and produce: ic parts testing, product reliability, compatibility testing, assembly quality. Lumiring Technology Limited wants to provide own customers the most universal, reliable and secure products with good quality and service. Architecture of our devices is very flexible and has big customization capabilities. High reliability, high security, high cost of develop - it is our advantages in security market. To provide you better products and services, we have been working hard! LumiRing thanks our customers for their support and sincere cooperation, and we will continue adhering independent development and innovation technology. 3 INTRODUCTION OF LUMIRING STANDALONE ACS The access control system is an important safety element of the any level object. Often, this system consists of different controllers, software and electronic locks and installer task consists in to make optimal offer for the customer. When installing the access control system, first of all we should define the main tasks and proposed to its requirements. If you need to organize access control for one or two control point (point of passage), the best solution is to use an autonomous system. The main advantage of autonomous systems is the ease of installation and no need to made long cable runs to communicate with the computer. This saves time and installation costs. The main advantages of autonomous systems: 1. No need computer for setting up and maintaining the system. 2. Can be installed on objects where are not specialists, who can use a personal computer, or where is not possibility of the installation of a personal computer. 4 3. The reliability. As you know, the simpler the system, the more reliable it is. The autonomous system is very simple and therefore reliable. 4. Easy to use. Autonomous systems do not require special maintenance and adjustment, and their programming is so easy can be done by untrained user. www.lumiring.com The Lumiring Company has developed and implemented the autonomous access control systems, produced by modern technologies, complete new design, extended functionality, unique method of indication and a built-in menu. In the process of development, company engineers tried to avoid widespread mistakes of most autonomic systems, such as: 1. Placing unlocking relay outside the door where any attacker can close the relay wires and came. In our devices, unlock relay place indoor where no any attacker can circumvent it. 2. The use of short codes cards - which often observed in the simplest autonomous systems and often generate duplicate cards. Our algorithm work with long card number to avoid this situation. 3. Very often, for the save money, the manufacturer use in schemas household components level which is unacceptable for use in a wide temperature range. In our devices, we use only components with industry standard level to ensure work in the temperature range -30 to +75 degrees. 4. Programming with the help of jumpers or code keypad. To Disassemble the device for programming or as well as to make a service system with complex programming via code dialing keyboard is not a simple task for the inexperienced user it prompts him to turn in addition to specialists; 5. Using devices with flush mounting. Often the standalone access controller mounted after the repairs completed, so use flush mount reader or flush exit button is unjustified decision – need made big hole in customer’s wall. All own devices Lumiring Company made for surface mounting that allows you to save the walls of the customer. 6. Any installer is aware of the fact - quality design of device that important thing for the end user. Housing design, lighting indication, audible indication - it’s all what end-user can feels during the exploitation of the system. It is what any visitors can see when enter a house or an office. Often an installer has to solve a difficult task of choosing a locking mechanism of the door or gate type for customer project. Besides, one must choose and approve the external design of the reader, type and design of the exit button. The Lumiring company want to make more ease this task - our devices (readers, controllers, exit button) have a stylish uniform design that can easily fit into any interior, adding to it modern high-tech style. 7. Simple indication. Lumiring company’s devices have 4 built-in modes of indication (sound, color, dynamics). The user can select and set each of them at any time without attracting any help. 8. Savings on protective systems. Often, companies that produce autonomous systems, in the pursuit of profit save on protective systems. Our controllers have a full protection complex: Protection against reverse polarity power input; Protection of all inputs and outputs from static discharge; Protection of all inputs and outputs of 12 volts. 9. Most of all autonomous systems do not have delineation by types of cards and therefore cannot offer user any additional features, which can give this function. Lumiring Company went a little farther, and added additional types of cards, with which users can work. 5 9. Most of all autonomous systems do not have delineation by types of cards and therefore cannot offer user any additional features, which can give this function. Lumiring Company went a little farther, and added additional types of cards, with which users can work. Card types: USER card (up to 2048 cards per controller). Used for standard use access control system. BOSS card (up to 10 cards per controller). Used for standard use of the access control system, but additionally can block premises for all user cards, by switching controller to mode “ONLY for BOSS”. In this mode, the passage is permitted only for BOSS cards. The exit from this mode to standard can made only by BOSS card. SECURITY card (up to 3 cards per controller). This type of card does not have any access to the premises and serve only to block the access of all types of cards. Unlocking occurs by Lock card. Used, if necessary, block the premises without access to it. 6 10. Many autonomous systems do not control cards in the premises. Our controller in operation with two readers is able to monitor the availability boss cards in the premises. When the last boss card leaves the premises, the controller can be switched to mode “ONLY for BOSS” automatically. At the same time, all user cards can be free to leave the premises. 11. Many of autonomous controllers on the market do not have the settings of the relay, which significantly limits their use in other tasks. Developing the algorithms of the controller, we took into account these settings. Relay settings: Selectable time relay in the range from 1-255 seconds. Selectable relay operation: Bistable, Pulse, Monostable Trigger mode – Relay will be activated on specific time (1-255 sec) Bistable mode – Each received right code change relay state to opposite Monostable – Relay will be activated while will be taken right code 12. Most buttons, which sold on market, have only one mode that significantly limits the range of their use. Buttons of Lumiring Company completely repeat the capabilities of the controller to manage the relay. The user can select the operation mode and set the time of relay operation. www.lumiring.com The company’s engineers developed unique solutions to provide comfort and safety. Some of them: Access control reader with built-in sensor Controller for simultaneous operation with ring button; contactless cards and remote control; Miniature surface flat reader; Controller for operation with an external reader, combined with contactless exit button. The Lumiring Company positioning own standalone devices series as a universal solution for a wide range of simple tasks. Do you want to put intelligent lock in your apartment, front, garage or office? Do you want to control the barrier or gate? Do you need remote opening gate or door by the remote control? Do you want to arm or disarm the object from protection by contactless card? Do you want to control lighting or generator on the card access, remote control, touch or contactless button? We have the solution for every! If you need a special unique algorithm or for you need exclusive light color (appropriate for your wall or door design) - we can implement it in a series of devices especially for Your project. Access control system will make life easier and safer, for your households or your staff in the office. Our company offers functional, reliable solutions, which harmoniously fit into the interior of any building and ensure its safety. 7 Readers Our company produce Access control readers, which can be used with our controller by WBUS interface or any other third party controller with Wiegand 26/34 interface. Only with our controller customer can realize control by special LumiRing menu and distance can reach up to 150 meters from reader to controller. Each our reader have four dynamic RGB led themes for action and stand-by modes. Customer can choose one theme by jumper settings or dip switch during installation. If customer use reader with our controller, he can change this theme by LumiRing menu. 8 www.lumiring.com LRx-1R LRE-1R:125kHz; LRM-1R:13,56Mhz Standard access control proximity reader with RGB LumiRing indicator. Can work with any access control systems where controllers use Wiegand 26/34 interface for connect readers. With LR-1Cxx controller series can support full features Visual LumiRing menu. Basic features: STATIC PROTECTION POWER PROTECTION REVERSE POWER PROTECTION INDUSTRIAL GRADE RGB ILLUMINATED RING WATER PROOF SAFE WALL MOUNT SECURITY SCREW Specification Power supply: 9-24VDC Communication Interface: Wiegand 26-34 bits / W-BUS Indicator: RGB light ring & Beeper Wiring Distance: 100 m (22 AWG with shielded cable) Visual themes: 4 stand-by, 4 reaction Housing Material: ABS + PC Reader frequency: 125kHz or 13.56Mhz (option) Color Standard: Black / Gray / Ivory Standard 125kHz: EMMARINE Operating Temperature: -30°С to +75°С Standard 13.56MHz: ISO14443A IP 56 / IP 65 Reading range 125kHz: Protection Standard: 6-12cm 110(L)X55(W)X18(H) Reading range 13.56MHz: Dimensions (mm): 3-8cm Weight (g): 40±5 Supported Tage 125kHz: EM 4001 / EM 4012 / HID ISOProx II / HID ProxCard II / TEMIC Power Consumption: < 1W 9 Readers LRx-1RD LRE-1RD; LRM-1RD Standard access control proximity reader with dynamic RGB LumiRing indicator and sensor doorbell button. Can work with any access control system where controllers use Wiegand 26/34 interface for connect readers. Doorbell function works with LR-1Cxx controllers series without any additional wires or with any electronic doorbell. With LR-1Cxx controller series, LRx-1RD can support full features Visual LumiRing menu. Basic features: STATIC PROTECTION POWER PROTECTION REVERSE POWER PROTECTION INDUSTRIAL GRADE RGB ILLUMINATED RING WATER PROOF SAFE WALL MOUNT SECURITY SCREW DOORBELL TOUCH SENSOR Specification 10 Power supply: 9-24VDC Power Consumption: < 1W Indicator: RGB light ring & Beeper Communication Interface: Wiegand 26-34 bits / W-BUS Visual theme: 4 stand-by, 4 reaction Wiring Distance: 100 m (22 AWG with shielded cable) Reader frequency: 125kHz or 13.56Mhz (option) Housing Material: ABS + PC Standard 125kHz: EMMARINE Color Standard: Black / Gray / Ivory Standard 13.56MHz: ISO14443A Operating Temperature: -30°С to +75°С Reading range 125kHz: 6-12cm Protection Standard: IP 56 / IP 65 Reading range 13.56MHz: 3-8cm Dimensions (mm): 110(L)X55(W)X18(H) Supported Tage 125kHz: EM 4001 / EM 4012 / HID ISOProx II / HID ProxCard II / TEMIC Weight (g): 40±5 www.lumiring.com LRH-1R LRH-1R Radio reader-receiver for work with radio remote control 433 Mhz / 868 Mhz(option) with standard Wiegand 26/34 output format. Can be used in any access control systems where controllers use Wiegand 26/34 interface for connect readers. Radio module support: Fixed code or Keeloq® dynamic code format. With LR-1Cxx controller series can support LumiRing menu. Basic features: STATIC PROTECTION POWER PROTECTION REVERSE POWER PROTECTION INDUSTRIAL GRADE RGB ILLUMINATED RING WATER PROOF SAFE WALL MOUNT SECURITY SCREW Specification Radio reader-receiver for work with radio remote control 433 Mhz / 868 Mhz(option) Wiegand 26/34 output Reading range 433 MHz: 50 m (open space) Power Consumption: < 1W Power supply: 9-24VDC Communication Interface: Wiegand 26-34 bits / W-BUS Indicator: RGB light ring & Beeper Wiring Distance: 100 m (22 AWG with shielded cable) Indication theme: 4 stand-by, 4 reaction Housing Material: ABS + PC Radio module: Integrated, superheterodyne, high reliability, reproductibility, interference proof Color Standard: Black / Gray / Ivory Transmission: Fixed code, Keeloq® dynamic code Operating Temperature: -30°С to +75°С Modulation / frequency: ASK / FSK 433,92 Mhz, ASK / FSK 868 MHz (option) Protection Standard: IP 56 / IP 65* Antenna impedance: 50 Dimensions (mm): 110(L)X55(W)X18(H) Antenna: Built in whip antenna Weight (g): 40±5 Description: 11 Readers LRxH-1R LREH-1R; LRMH-1R This device its Hybrid reader which unite standard proximity access control reader with radio reader-receiver for work with radio remote control 433 Mhz(868 Mhz) Standard Wiegand 26/34 interface can be used in any access control systems where controllers use Wiegand 26/34 interface for connect readers. With LR-1Cxx controller series can support full features Visual LumiRing menu. Basic features: STATIC PROTECTION POWER PROTECTION REVERSE POWER PROTECTION INDUSTRIAL GRADE RGB ILLUMINATED RING WATER PROOF SAFE WALL MOUNT SECURITY SCREW DUAL WORK MODE Specification 12 Power supply: 9-24VDC Reading range 125kHz: 6-12cm Indicator: RGB light ring & Beeper Reading range 13.56MHz: 3-8cm Indication theme: 4 stand-by, 4 reaction Supported Tage 125kHz: EM 4001 / EM 4012 / HID ISOProx II / HID ProxCard II / TEMIC Reader frequency: 125kHz or 13.56Mhz (option) Power Consumption: < 1W Standard 125kHz: EMMARINE Communication Interface: Wiegand 26 - 34 bits / W-BUS Standard 13.56MHz: ISO14443A Wiring Distance: 100 m (22 AWG with shielded cable) Radio module: Integrated, superheterodyne, high reliability, reproducibility, interference proof Housing Material: ABS + PC Transmission protection: Keeloq®, dynamic code Color Standard: Black / Gray / Ivory Modulation / frequency: ASK / FSK 433,92 Mhz, ASK / FSK 868 MHz (option) Operating Temperature: -30 C to +75 C Antenna impedance: 50 Protection Standard: IP 56 / IP 65 Antenna: Built in whip antenna Dimensions (mm): 110(L)X55(W)X18(H) Reading range 433 MHz: 50 m (open space) Weight (g): 40±5 o o www.lumiring.com LRE-1RS Miniature slim access control proximity reader with RGB LumiRing indicator. Can work with any access control system where use Wiegand 26/34 standard. With LR-1Cxx controller series can support full features LumiRing menu. Basic features: STATIC PROTECTION POWER PROTECTION REVERSE POWER PROTECTION INDUSTRIAL GRADE RGB ILLUMINATED RING WATER PROOF SAFE WALL MOUNT SECURITY SCREW Specification Power supply: 12VDC Communication Interface: Wiegand 26-34 bits / W-BUS Indicator: RGB light ring & Beeper Wiring Distance: 100 m (22 AWG with shielded cable) Indication theme: 4 stand-by, 4 reaction Housing Material: ABS + PC Reader frequency: 125kHz Color Standard: Black / Gray / Ivory Standard 125kHz: EMMARINE Operating Temperature: -30 C to +75 C Protection Standard: IP 56 / IP 65 Reading range 125kHz: 6-12cm o o Supported Tage 125kHz: EM 4001 / EM 4012 / HID ISOProx II / HID ProxCard II / TEMIC Dimensions (mm): 55(L)X55(W)X12(H) Power Consumption: < 1W Weight (g): 30±5 13 Standalone systems The access control system is an important safety element of the any level object. Often, this system consists of different controllers, software and electronic locks and installer task consists in to make optimal offer for the customer. When installing the access control system, first of all we should define the main tasks and proposed to its requirements. If you need to organize access control for one or two control point (point of passage), the best solution is to use an autonomous system. The main advantage of autonomous systems is the ease of installation and no need to made long cable runs to communicate with the computer. This saves time and installation costs. 14 www.lumiring.com LRx-1CR LRE-1CR:125kHz; LRM-1CR:13,56Mhz Standalone Access Controller with internal proximity reader embed dynamic RGB LED indicator with Lumiring visual menu system. On board socket for external reader. With this device, you can solve many different questions with organization simple access control system. Its can be two-way access control system – for this need buy additional reader in sample LRE-1R. Or simple one-way in pair with exit button LR-NT. You can made installation on your own home, office, garage etc. Any entry where need simple access control system. Hardware setting of device can be controlled only by jumpers but all software setting user can change in any time by Visual LumiRing menu. Basic features: 2048 CARDS MEMORY DOOR CONTROL RGB ILLUMINATED RING SAFE WALL MOUNT STATIC PROTECTION POWER PROTECTION REVERSE POWER PROTECTION INDUSTRIAL GRADE WATER PROOF SECURITY SCREW SECURITY SCREW Specification Memory: 2048 codes (special version up to 15 000) Standard 13.56MHz: ISO14443A Memory type: EEPROM, non-volatile Reading range 125kHz: 6-12cm Critical event protection: Watch Dog, Power On Reset Reading range 13.56MHz: 3-8cm Relay NC/NO: 1 (Control mode:Trigger, Pulse, Monostable) Supported Tage 125kHz: EM 4001 / EM 4012 / HID ISOProx II / HID ProxCard II / TEMIC Relay operation time control: 1-255 seconds, 3 seconds default Power Consumption: < 1W Relay Specification: 2A - continuous operation; 10A pulse mode Communication Interface: Wiegand 26-34 bits / W-BUS Door control input: 1 (Door not closed control, Breaking open control) Wiring Distance: 100 m (22 AWG with shielded cable) Exit button input: 1 (Free/Card entry switching by long press - 10 seconds) Housing Material: ABS + PC Alarm out: 1 0,5A max Color Standard: Black / Gray / Ivory Power supply: 9-24VDC Operating Temperature: -30 C to +75 C Indicator: RGB light ring & Beeper Protection Standard: IP 56 / IP 65 Visual themes: 4 stand-by, 4 reaction Dimensions (mm): 110(L)X55(W)X18(H) Reader frequency: 125kHz or 13.56Mhz (option) Weight (g): 40±5 Standard 125kHz: EMMARINE o o 15 Standalone systems LR-1CB Standalone Access Controller with NO-TOUCH exit button. With this device you can improve level of security if compare with simple LRx-1 CR. All-important parts in this solution place inside guard zone. Behind door must be placed any reader with Wiegand 26 out in sample our LRE-1R or LRE-1RD ( if you need doorbell function). Hardware setting of device can be controlled only by jumpers but all software setting user can change in any time by LumiRing Visual menu*. Basic features: 2048 CARDS MEMORY DOOR CONTROL RGB ILLUMINATED RING INDUSTRIAL GRADE STATIC PROTECTION POWER PROTECTION REVERSE POWER PROTECTION SAFE WALL MOUNT WATER PROOF SECURITY SCREW PANIC BUT TON NO-TOUCH EXIT Specification 16 Memory: 2048 codes (special version up to 15 000) Visual theme: 4 stand-by, 4 reaction Memory type: EEPROM, non-volatile NO-TOUCH distance: 6-10cm Critical event protection: Watch Dog, Power On Reset Power Consumption: < 1W Relay NC/NO: 1 (Control mode: Trigger, Pulse, Monostable) Communication Interface: Wiegand 26-34 bits / W-BUS Relay operation time control: 1-255 seconds, 3 seconds default Wiring Distance: 100 m (22 AWG with shielded cable) Relay Specification: 2A - continuous operation; 10A pulse mode Housing Material: ABS + PC Door control input: 1 (Door not closed control, Breaking open control) Color Standard: Black / Gray / Ivory Exit button input: Built-in (Free/Card entry switching by long press - 10 seconds) Operating Temperature: -30 C to +75 C Alarm out: 1 0,5A max Protection Standard: IP 56 / IP 65 Power supply: 9-24VDC Dimensions (mm): 110(L)X55(W)X18(H) Indicator: RGB light ring & Beeper Weight (g): 40±5 o o www.lumiring.com LRH-1CRB Standalone Access Controller with NO-TOUCH exit button and radio remote control receiver-reader 433 Mhz (868 Mhz option). You can use this device as apart system or with Wiegand 26/34 reader. LRH -1CRB can extend flexibility and usability in any access control system. No any devices on outside wall – all parts inside your premises. For entry need only remote control keyfob for go outside only swipe hands to device and door will be unlock. With this device and any reader with Wiegand 26 interface, you can improve level of security if compare with simple LRx-1CR. Hardware settings of device can be controlled only by jumpers but all software setting user can change in any time by Visual LumiRing menu*. Basic features: 2048 CARDS MEMORY DOOR CONTROL RGB ILLUMINATED RING STATIC PROTECTION POWER PROTECTION REVERSE POWER PROTECTION PANIC BUT TON INDUSTRIAL GRADE WATER PROOF SECURITY SCREW NO-TOUCH EXIT RADIO READER SAFE WALL MOUNT Specification Memory: 2048 codes (special version up to 15 000) Power supply: 9-24VDC Memory type: EEPROM, non-volatile Indicator: RGB light ring & Beeper Critical event protection: Watch Dog, Power On Reset Visual theme: 4 stand-by, 4 reaction Radio module: Integrated, superheterodyne, high reliability, reproductibility, interference proof NO-TOUCH distance: 6-10cm Power Consumption: < 1W Transmission: Fixed code, Keeloq® dynamic code Wiegand 26-34 bits / W-BUS Modulation / frequency: ASK / FSK 433,92 Mhz, ASK / FSK 868 MHz (option) Communication Interface: Wiring Distance: Reading range 433 MHz: 100 m (22 AWG with shielded cable) 50 m (open space) Housing Material: ABS + PC Relay NC/NO: 1 (Control mode:Trigger, Pulse, Monostable) Color Standard: Black / Gray / Ivory Relay operation time control: 1-255 seconds, 3 seconds default -30 C to +75 C Relay Specification: 2A - continuous operation; 10A pulse mode Operating Temperature: Protection Standard: IP 56 / IP 65 Door control input: 1 (Door not closed control, Breaking open control) Dimensions (mm): 110(L)X55(W)X18(H) Exit button input: Built-in (Free/Card entry switching by long press - 10 seconds) Weight (g): 40±5 Alarm out 1 0,5A max o o 17 Standalone systems LRH-1CR Standalone Access Controller with radio remote control receiver-reader 433 Mhz(868Mhz option).This device can be used in any application where need universal and flexible solution for remote control system. Support up to 2048 codes. Support 3 types of relay control: Bistable, Monostable, Trigger. Realy time control: 1-255 sec. Basic features: 2048 CARDS MEMORY DOOR CONTROL RGB ILLUMINATED RING STATIC PROTECTION POWER PROTECTION REVERSE POWER PROTECTION PANIC BUT TON SAFE WALL MOUNT WATER PROOF SECURITY SCREW INDUSTRIAL GRADE RADIO READER Specification 18 Memory: 2048 codes Transmission: Fixed code, Keeloq® dynamic code Relay NC/NO: 1 (Control mode:Trigger, Pulse, Monostable) Modulation / frequency: ASK / 433,92 MHz, ASK / 868 MHz (option) Relay operation time control: 1-255 seconds, 3 seconds default Reading range 433 MHz: 50 m (open space) Relay Specification: 2A - continuous operation; 10A pulse mode Power Consumption: < 1W Door control input: 1 (Door not closed control, Breaking open control) Housing Material: ABS + PC Exit button input: 1 (Free/Card entry switching by long press - 10 seconds) Color Standard: Black / Gray / Ivory Alarm out: 1 0,5A max Operating Temperature: -30 C to +75 C Power supply: 9-24VDC Protection Standard: IP 56 / IP 65 Indicator: RGB light ring & Beeper Dimensions (mm): 110(L)X55(W)X18(H) Indication theme: 4 stand-by, 4 reaction Weight (g): 40±5 Radio module: Integrated, superheterodyne, high reliability, reproductibility, interference proof o o www.lumiring.com LRxH-1CR LREH-1CR; LRMH-1CR Standalone Access Controller with internal RFID reader, radio remote control 433 Mhz (868 Mhz option) code receiver and socket for external reader. With this device, you can make simple two-way access control system, which works with wireless cards or tags. The functionality of this device is greatly extended by the use of radio module. The radio module is worked at 433Mhz(868 Mhz option) with radio remote control. The distance can reach 50 meters in open space. Now you can make simple hybrid access control system where you can use both type of identification method: for long distance 433Mhz(868 Mhz option) for close -125Khz (1 3,56 Mhz option). All software-setting user can change in any time by Visual LumiRing menu*. Basic features: 2048 CARDS MEMORY DOOR CONTROL RGB ILLUMINATED RING STATIC PROTECTION POWER PROTECTION REVERSE POWER PROTECTION PANIC BUT TON INDUSTRIAL GRADE WATER PROOF SECURITY SCREW DUAL WORK MODE Specification Memory: 2048 codes (special version up to 15 000) Transmission: Fixed code, Keeloq® dynamic code Memory type: EEPROM, non-volatile Critical event protection: Modulation / frequency: ASK / FSK 433,92 Mhz, ASK / FSK 868 MHz (option) Watch Dog, Power On Reset 50 m (open space) Relay NC/NO: 1 (Control mode: Trigger, Pulse, Monostable) Reading range 433 MHz: 6-12cm Relay operation time control: Reading range 125kHz: 1-255 seconds, 3 seconds default 3-8cm Relay Specification: 2A - continuous operation; 10A pulse mode Reading range 13.56MHz: Power Consumption: < 1W Door control input: 1 (Door not closed control, Breaking open control) Communication Interface: Wiegand 26-34 bits / W-BUS Exit button input: 1 (Free/Card entry mode switching by long press - 10 seconds) Wiring Distance: 100 m (22 AWG with shielded cable) Alarm out: 1 0,5A max Power supply: 9-24VDC Housing Material: ABS + PC Indicator: RGB light ring & Beeper Color Standard: Black / Gray / Ivory Visual theme: 4 stand-by, 4 reaction Reader frequency: -30 C to +75 C 125kHz or 13.56Mhz (option) Operating Temperature: Standard 125kHz: EMMARINE Protection Standard: IP 56 / IP65 Standard 13.56MHz: ISO14443A Dimensions (mm): 110(L)X55(W)X18(H) Radio module: Integrated, superheterodyne, high reliability, reproductibility, interference proof Weight (g): 40±5 o o 19 Standalone systems LRE-1CRS Standalone Access Controller with internal proximity reader embed dynamic RGB LED indicator with Lumiring visual menu system. On board socket for external reader. With this device, you can solve many different questions with organization simple access control system. Its can be two-way access control system – for this need buy additional reader in sample LRE-1R. Or simple one-way in pair with exit button LR-SBB. You can made installation on your own home, office, garage etc. Any entry where need simple access control system. Hardware setting of device can be controlled only by jumpers but all software setting user can change in any time by LumiRing menu. Basic features: 2048 CARDS MEMORY DOOR CONTROL RGB ILLUMINATED RING STATIC PROTECTION POWER PROTECTION REVERSE POWER PROTECTION WATER PROOF SECURITY SCREW SAFE WALL MOUNT INDUSTRIAL GRADE Specification 20 Memory: 2048 codes (special version up to 15 000) Reading range 125kHz: 6-12cm Memory type: EEPROM, non-volatile Supported Tage 125kHz: EM 4001 / EM 4012 Critical event protection: Watch Dog, Power On Reset Power Consumption: < 1W Relay NC/NO: 1 (Control mode:Trigger, Pulse, Monostable) Communication Interface: Wiegand 26-34 bits / W-BUS Relay operation time control: 1-255 seconds, 3 seconds default Wiring Distance: 100 m (22 AWG with shielded cable) Relay Specification: 2A - continuous operation; 10A pulse mode Housing Material: ABS + PC Exit button input: 1 (Free/Card entry switching by long press - 10 seconds) Color Standard: Black / Gray / Ivory Power supply: 9-24VDC Operating Temperature: -30 C to +75 C Indicator: RGB light ring & Beeper Protection Standard: IP 56 / IP 65 Visual themes: 4 stand-by, 4 reaction Dimensions (mm): 55(L)X55(W)X12(H) Standard 125kHz: EMMARINE Weight (g): 40±5 o o Accessories LOCKS Most of important part in any access control system its locking device. We offer to our customers many kind of locking devices: magnetic lock, electric strike, electric bold and etc. POWER SUPPLY Not exist devices which can work without power supply. Usual, for access control system used unutterable power supply. Only this kind of power supply can have backup battery and can give electric power to your access control system when external power will fault. BUTTONS Any access control system use buttons for allow exit from premises. We offer to our customers many kind of buttons: no-touch, sensor, mechanical, smart and etc. CARDS and TAGS Most simple way of person identification in access control system - use proximity cards or tags. We can offer to our customers many types of RFID cards and tags with different features and stable quality. 21 Locks LR-70ML SINGLE DOOR MAGNETIC MINI LOCK Holding Force: 70kg(140Lbs) Input Voltage: 12 or 24VDC Current: 12V/240mA or 24V/120mA Operating Temperature: -10 C to +55 C Protection Standard: IP 68 Cover Finish: Anodized aluminum Lock Finish: Zinc Armature Plate Finish: Zinc Dimensions (mm): 90Lx39Wx24.5H(mm) Armature Plate Dimension: 90Lx33Wx9.8H(mm) Weight (g): 700±5 Fail Safe: Locked when energized Holding Force: 800kg Input Voltage: DC 12V Start Current: 900mA Standby Current: 120mA Induction Distance: 8mm Operating Temperature: -10 C to +55 C Special Designed: Tested to 500000 cycles Face place material: High Aluminum Face Plate: 205Lx35WX41.5H(mm) Strike: 90Lx25Wx2H(mm) Weight (g): 720±5 o o LR-180ML SINGLE DOOR MAGNETIC LOCK o o LR-350W WATERPROOF SINGLE DOOR MAGNETIC LOCK 22 Holding Force: 350kg (800Lbs) Input Voltage: 12/24VDC+10% Current: 12V/480mA or 24V/240mA Operating Temperature: -10 C to +55 C Protection Standard: IP 56 Cover Finish: Anodized aluminum Lock Finish: Zinc Armature Plate Finish: Zinc Dimensions(mm): 227.6Lx52.6Wx28.5H(mm) Armature Plate Dimension: 190Lx45Wx11H(mm) Weight(g): 2700±5 o o www.lumiring.com LR-100S FAIL SAFE SIMPLE ELECTRIC BOLT Fail Safe: Locked when energized Holding Force: 800kg Input Voltage: DC 12V Start Current: 900mA Standby Current: 120mA Induction Distance: 8mm Operating Temperature: -10 C to +55 C Special Designed: Tested to 500000 cycles Face place material: High Aluminum Face Plate: 205Lx35WX41.5H(mm) Strike: 90Lx25Wx2H(mm) Weight (g): 720±5 o o LR-500A(LED) FAIL SAFE STURDINESS ELECTRIC BOLT Fail Safe: Locked when energized Holding Force: 1000kg Input Voltage: DC 12V Start Current: 900mA Door status signal output contact: NO/COM Bolt: 16mm DIA,stainless steel 13mm throw Autolock Time Delay: 0,3,6,9sec Lock cylinder material: Stainless Steel Operating Temperature: -10 C to +55 C Special Designed: Tested to 500000 cycles Face place material: 304 stainless steel, wire draw finishing Face Plate: 192Lx25WX37H(mm) Strike: 90Lx25Wx2H(mm) Weight (g): 680±5 o o LR-500B(LED) FAIL SECURE STURDINESS ELECTRIC BOLT Fail Safe: Locked when energized Holding Force: 1000kg Input Voltage: DC 12V Start Current: 900mA Door status signal output: NO/COM Bolt: Cylinder: 16mm DIA,stainless steel 13mm throw One side is key, another side is knob Autolock Time Delay: 0,3,6,9sec Lock cylinder material: Stainless Steel Operating Temperature: -10 C to +55 C Special Designed: Tested to 500000 cycles Face place material: 304 stainless steel Face Plate: 192Lx25WX37H(mm) Strike: 90Lx25Wx2H(mm) Weight (g): 680±5 o o 23 Locks LR-131NO/NC NARROW-TYPE ELECTRIC STRIKE Holding Force: 500kg Feature: Fail Secure(LR-131NO); Fail Safe(LR-131NC) Input Voltage: DC 12V Current: 200mA(LR-131NO); 200mA(LR131NC) Face plate Housing: Painted Steel Operating Temperature: -10 C to +55 C Special Designed: Tested to 1 000 000 cycles Strike Structure: Stainless Steel Lock Size: 160Lx25Wx31H(mm) Weight (g): 360±5 o o LR-134NO(S) EUROPEAN NARROW-TYPE AND ADJUSTABLE ELECTRIC STRIKE Holding Force: 300kg Feature: Adjust Lock-tongue to NO style Input Voltage: DC12V (Need Order DC24V) Current: 650mA Face plate Housing: Surface by coating nickel Operating Temperature: -10 C to +55 C Special Designed: Tested to 1 000 000 cycles Strike Structure: Stainless Steel Lock Size: 110Lx25Wx31.5H(mm) Weight (g): 280±5 o o LR-138NO/NC ANSI STANDARD HEAVY DUTY ELECTRIC STRIKE 24 Holding Force: 1000kg Feature: Adjust Lock-tongue to NO style Input Voltage: DC12V (Need Order DC24V) Current: 220mA Face plate Housing: Painted Steel Operating Temperature: -10 C to +55 C Special Designed: Tested to 1 000 000 cycles Strike Structure: Stainless Steel Lock Size: 124Lx43Wx35H(mm) Weight (g): 420±5 o o Power Supply LR1203-01B 12V DC 3 AMP UNINTERRUPTIBLE POWER SUPPLY Description: 12V DC 3 Amp Uninterruptible Power Input: 190-240V AC @ 50-60Hz Output voltage: 12V±15% DC Output Current: 3A Over-current Protection: 3.6A±5% Ripple & Noise: <100mV Efficiency: 85% Charge Voltage: 13.5V Charge Current (Max.): 1A Battery Under-voltage Protection: 10V Enclosure Dimensions: 203L x 163W x 74H mm Weight (g): 1200±5 LR1203-01K 12V DC 3 AMP ACCESS SYSTEM POWER SUPPLY Description: 12V DC 3 Amp Access System Power Supply Input: 100-240V AC @ 50-60Hz Output voltage: 12-14V DC ADJ Output Current: 3A Over-current Protection: 3.6A±5% Ripple & Noise: <100mV Efficiency: 85% Enclosure Dimensions: 163L x 163W x 48W mm Weight (g): 800±5 LR1205-01B 12V DC 5 AMP UNINTERRUPTIBLE POWER SUPPLY Description: 12V DC 5 Amp Uninterruptible Power Supply Input: 100-240V AC @ 50-60Hz Output voltage: 12V±15% DC Output Current: 5A Over-current Protection: 6A±5% Ripple & Noise: <100mV Efficiency: 85% Charge Voltage: 13.5V Charge Current (Max.): 1A Battery Under-voltage Protection: 10V Enclosure Dimensions: 265L x 195W x 75H mm Weight (g): 1400±5 25 Buttons LR-NT NO-TOUCH EXIT SMART BUTTON Description: NO TOUCH exit button Relay NC/NO: 1 (Control mode: Trigger, Pulse, Monostable) Relay Specification: HEXFET® Power MOSFET 15A 12V @25 °C Door control input: 1 Power supply: 9-16VDC Indicator: RGB light ring & Beeper Indication theme: 3 NO-TOUCH distance: 7-10cm Power Consumption: < 1W Housing Material: ABS + PC Color Standard: Black / Gray / Ivory Operating Temperature: -30 C to +75 C Protection Standard: IP 56 Dimensions (mm): 110(L)X55(W)X18(H) Weight (g): 40±5 o o LR-SSB SENSOR (TOUCH) EXIT SMART BUTTON Relay NC/NO: 1 Relay Specification: 1,5A 12V Set relay work time: 1-255 sec Set relay control mode: Trigger, Pulse, Monostable Power supply: 9-16VDC Indicator: RGB light ring & Beeper Indication theme: 3 Power Consumption: < 1W Housing Material: ABS + PC Color Standard: Black / Gray / Ivory Operating Temperature: -30 C to +75 C Protection Standard: IP 56 Dimensions (mm): 55(L)X55(W)X12(H) Weight (g): o o 40±5 LR-841A INFRARED TYPE NO-TOUCH EXIT BUTTON 26 Description: Infrared Sensor Exit Button Output Contact: NO/NC/COM Relay Specification: 1A@30VDC,0.5A@125VAC Set relay work time: 0.5~25s(Adjustable) Detection range: 4-10cm(Adjustable) Power supply: 12VDC LED Indicator: White LED indicator: Power OFF Red LED indicator: Power ON(standby) Green LED indicator: Power ON(sensation) Power Consumption: < 1W Mechanical Life: 1,000,000 tested Operating Temperature: -20 Cto +55 C Protection Standard: IP 56 Dimensions (mm): 90Lx35Wx37.7H(mm) Weight (g): 200±5 o o www.lumiring.com LR-820B(LED) PIEZOELECTRIC EXIT BUTTON(STAINLESS STEEL) Description: Piezoelectric Exit Button(Stainless steel) Output Contact: NO/COM Relay Specification: 1A@30VDC,0.5A@125VAC Power supply: 12-24V LED Status: RED:Standby, GREEN:Operation Current: Standby:20mA, Operation:60mA Operating Temperature: -20 C to +55 C Protection Standard: IP 68 Dimensions(mm): 86Lx50Wx19.5H(mm) Weight(g): 200±5 Weight (g): 700±5 o o LR-810A MECHANICAL EXIT BUTTON Description: Aluminum Panel with Elegant Style Output Contact: NO/NC/COM Relay Specification: 1A@30VDC,0.5A@125VAC Operating Temperature: -10 C to +55 C Protection Standard: IP 68 Dimensions(mm): L90xW35xH28.85(mm) Weight(g): 180±5 Face place material: High Aluminum Face Plate: 205Lx35WX41.5H(mm) Strike: 90Lx25Wx2H(mm) Weight (g): 720±5 Description: Aluminum Panel with Elegant Style and button box. Output Contact: NO/COM Relay Specification: 3A@36VDC Max Operating Temperature: -20 C to +55 C Protection Standard: IP 68 Dimensions(mm): 83Lx32Wx25H(mm) Weight(g): 86±5 Armature Plate Finish: Zinc Dimensions(mm): 227.6Lx52.6Wx28.5H(mm) Armature Plate Dimension: 190Lx45Wx11H(mm) Weight (g): 2700±5 o o LR-815 MECHANICAL EXIT BUTTON o o 27 Card&Tags IDENTIFICATION PROXIMITY CARDS Model: LR-ISO-TM Description: Universal RFID card. Function: Identification Frequency: Low Frequency 125Khz Memory: 300 Kbit Read/Write function: Read / Write Reading Distance: 3-10cm with desktop reader, can reach 40cm upon long range reader Dimensions: CR80 85.60 x 53.98mm Thickness: 0.84mm Card Surface: Matte / Gloss finish Weight (g): 720±5 Model: LR-ISO-MF Description: Standard Mifare 13.56Mhz RFID card Function: Identification Frequency: High Frequency 13.56Khz Memory: 1 KB Model: LR-ISO-EM Description: Standard RFID card. Function: Identification Frequency: Low Frequency 125Khz Memory: 64bit Read/Write function: ReadOnly Read/Write function: Read / Write Reading Distance: 3-10cm with desktop reader, can reach 40cm upon long range reader Encryption function: Support Dimensions: CR80 85.60 x 53.98mm Reading Distance: 3-10cm with desktop reader Thickness: 0.84mm Dimensions: CR80 85.60 x 53.98mm Card Surface: Matte / Gloss finish Thickness: 0.84mm Weight (g): 720±5 Card Surface: Matte / Gloss finish IDENTIFICATION PROXIMITY KEYFOBS 28 Model: LR-KF10M Model: LR-KF03E Description: 13.56Mhz Mifare RFID keyfob Description: 125Khz RFID keyfob Function: Identification Function: Identification Frequency: High Frequency 13.56Mhz Frequency: Low Frequency 125Khz Memory: 1 KB Memory: 64bit Read/Write function: Read / Write Read/Write function: ReadOnly Ecnryption modes: Support Reading Distance: 3-10cm with desktop reader, can reach 40cm upon long range reader Reading Distance: 3-10cm with desktop reader, can reach 40cm upon long range reader Dimensions: 40.5 x 32 mm Dimensions: 40.5 x 32 mm Thickness: 4.2mm Thickness: 4.2mm Basic colors: Basic colors: Blue / red Blue/ gray/ yellow/ purple/ white/ green/ red www.lumiring.com PROXIMITY WATERPROOF WRISTBAND Model: LR-WB03M Description: 13.56Mhz Mifare RFID wristband Function: Identification Frequency: High Frequency 13.56Mhz Memory: 1 KB Read/Write function: Read / Write Ecnryption modes: Support Reading Distance: 3-10cm with desktop reader, can reach 40cm upon long range reader Dimensions: dia74mm / dia65mm / dia50mm Weight (g): 700±5 Model: LR-WB04M Description: 13.56Mhz Mifare RFID wristband Function: Identification Frequency: High Frequency 13.56Mhz Memory: 1 KB Read/Write function: Read / Write Ecnryption modes: Support Reading Distance: 3-10cm with desktop reader, can reach 40cm upon long range reader Dimensions: dia74mm / dia65mm / dia50mm LR-CS STANDARD 125KHZ RFID CLAMSHELL CARD Model: LR-CS Description: Standard CLAMSHELL RFID card Function: Identification Frequency: Low Frequency 125Khz Memory: 64 bit Read/Write function: Read Reading Distance: 8-14cm with desktop reader, can reach 1 m upon long range reader Dimensions: 85.60 x 53.98mm Thickness: 1.80mm Card Surface: Matte. Support: Jet-dot printing number / Silk-screen printing logo 29 Appendix A. Connection diagram Appendix A. Connection diagram 30 www.lumiring.com LRx-1CR DC SIREN FUNCTION: ALARM-OUT used for connection to the alarm siren. If door was open without card or not from EXIT button. Controller Turn-ON alarm mode and switch ALARM OUT to closed position. After 10 seconds timeout controller Turn-OFF ALARM-OUT. Commutating ability for alarm out: 0,7A 12V. Door control sensor must be installed. ALTERNATIVE DIAGRAM FOR CONNECT WITH 3RD PARTY READER (6 WIRES) JUMPER SETTINGS IN THIS MODE 31 Appendix A. Connection diagram LR-1CB / LRH-1CRB FIRE ALARM FUNCTION: ALARM-IN used for connection to the fire alarm system. When the fire alarm system emits an alarm the door shall be opened in accordance with the rules on safety and security. Controller will back to normal work after fire alarm system change status to normal. ALTERNATIVE DIAGRAM FOR CONNECT WITH 3RD PARTY READER (6 WIRES) JUMPER SETTINGS IN THIS MODE 32 www.lumiring.com LRE-1CRS NOTE: External reader must have 5-wire interface Wiegand 26 - 34 or W-BUS. Controller automatic detect which type of Wiegand have external reader. For work with W-BUS reader need check DIP-SWITCH setting. By factory default controller have setting for work with W-BUS. LR-1CBS 33 Appendix A. Connection diagram LRE-1RS 3RD PARTY CONTROLLER WIEGAND 26-34 bits 6 WIRES LM CONTROLLER W-BUS 5 WIRE LRx-1R / LRH-1R / LRxH-1R For connect to W-BUS controllers must use next scheme: 34 www.lumiring.com LRx-1RD For connect to W-BUS controllers must use next scheme: INTERNAL DOORBELL FUNCTION: Internal doorbell function work only by W-BUS interface. Example of use: Outside LRE-1RD + Inside LR-1CB In this case when someone press doorbell button both devices play doorbell melody. NOTE: Commutating ability by doorbell out: 0,7A 12V LRH-1CR 35 LUMIRING TECHNOLOGY LIMITED Adress: 3/F, Building R, Linghangyuan Industrial Park, No.163, Banxuegang Road, Longgang District, Shenzhen, China Zip: 518000 Phone: 86-755-8322-1175 Fax: 86-755-8322-1176 Homepage: www.lumiring.com E-mail: [email protected]