Transcript
PRODUCTS OVERVIEW | FIBRE SKY SYSTEM - THE AERIAL FTTH ACCESS NETWORK
PRODUCTS OVERVIEW PLC SPLITTER
PLC splitters are used to distribute or combine optical signals. Most commonly they are available with uniform signal division. The PLC splitter operating wavelengths range from 1260 nm to 1650 nm. They are compliant with the following standards: PN-EN 61753-031, ZN-13-TPSA-045. The operating temperature range is - 40°C to + 85°C. The PLC splitters are available in two options: with 250 µm primary coated fibre outputs or with 900 µm buffered fibres terminated with fibre optic connectors.
FSS-ZO-A-OK 3-6 MM OPTICAL DROP CABLE CLAMP
1 x 8 PLC Splitter with SC/APC terminated pigtails
The FSS-ZO-A-OK drop cable clamps are used to anchor aerial round drop cables used in FTTH networks. The drop cable clamps are manufactured of high quality UV stabilised plastic. The clamp has the principle of a round route for fixing the cable. This helps to secure it as tightly as possible. The installation is very easy and quick without the use of any tools.
FSS-ZO-A-P 3-6 MM DROP CABLE CLAMP
The FSS-ZO-A-P drop cable clamps are used to anchor aerial round drop cables used in FTTH networks. The drop cable clamps are manufactured of high quality UV stabilised plastic. The outer sheath of the cable is gripped in the cable grove. The installation is very easy and quick without the use of any special tools.
FSS-ZO-ADSS CABLE ANCHOR CLAMP
The FSS-UO-ADSS Cable Anchor Clamps are used to secure aerial self-supporting round cables used in FTTH networks. The anchor clamp consists of the outer body manufactured of high quality UV stabilised plastic and stainless steel suspending cord. When the cable is fully tensioned, the two wedges move further down the clamp into the body and grip onto the outer sheath of the cable. The installation is very easy and quick without the use of any special tools. The Anchor Clamps are available in a variety of sizes depending on the diameter of applied cable. FSS-ZO-A-OK Anchor Clamp
HELICAL DEAD-END STRAIN CLAMP FSS-ZO-O
The FSS-ZO-O Helical Dead-End Strain Clamps are used to guide self-supporting cables along aerial cable lines. They are dedicated for spans of up to 250 m. The Helical Dead-End Strain Clamps are manufactured of hot-dip galvanised steel. The armour rods and spiral dead-end are covered with high friction material to hold the cable firmly in place. The installation accessories like a turnbuckle and dead-end protection thimble need to be ordered separatelly. The Helical Cable Suspension Clamps are available in a variety of sizes depending on the diameter of applied cable.
FSS-ZP-W ADSS CABLE SUSPENSION CLAMP
The FSS-ZP-W ADSS Cable Suspension Clamps are used to guide self-supporting cables along straight sections of the aerial cable lines. The cable suspension clamps are manufactured of high quality UV stabilised plastic. The ribbed insert holds the cable firmly in place. The installation is very easy and quick without the use of any special tools. The ADSS Cable Suspension Clamps are available in a variety of sizes depending on the diameter of applied cable.
FSS-ZP-J ADSS CABLE SUSPENSION CLAMP
FSS-ZO-ADSS Anchor Clamp
The FSS-ZP-J ADSS Cable Suspension Clamps are used to guide self-supporting cables along straight sections of the aerial cable lines. The cable suspension clamps consist of galvanised steel body and UV stabilised neoprene protective sleeve. The installation is very easy and quick without the use of any special tools. The ADSS Cable Suspension Clamps are available in a variety of sizes depending on the diameter of applied cable.
FSS-ZP-O HELICAL CABLE SUSPENSION CLAMP
The FSS-ZP-OP Helical Cable Suspension Clamps are used to guide self-supporting cables along straight sections of the aerial cable lines. The Helical Cable Suspension Clamps are manufactured of hot-dip galvanised steel providing high durability and longevity in the outdoor operating environment. The installation is very easy and quick without the use of any special tools. The Helical Cable Suspension Clamps are available in a variety of sizes depending on the diameter of applied cable.
FSS-ZP-OW REINFORCED HELICAL CABLE SUSPENSION CLAMP
FSS-ZP-OW Reinforced Helical Cable Suspension Clamp
The FSS-ZP-OW Reinforced Helical Cable Suspension Clamps are used to guide self-supporting cables along straight sections of the aerial cable lines. The Reinforced Helical Cable Suspension Clamps are manufactured of hot-dip galvanised steel providing high durability and longevity in the outdoor operating environment. The additional helical armour rods increase resistance to mechanical damage. The installation is very easy and quick without the use of any special tools. The Reinforced Helical Cable Suspension Clamps are available in a variety of sizes depending on the diameter of applied cable.
FSS-WS-U UNIVERSAL POLE BRACKET
The FSS-WS-U is designed to suspend the aerial self-supporting cable clamps on wooden, concrete or metallic poles. The bracket is made of the aluminium alloy. Up to 3 aerial cable clamps can be suspended on one FSS-WS-U Pole Bracket. The bracket can be mounted to the pole with M16/M14 bolt or with stainless steel band.
FIBRE SKY SYSTEM - THE AERIAL FTTH ACCESS NETWORK | PRODUCTS OVERVIEW
PRODUCTS OVERVIEW FSS-WS-SH POLE BRACKET WITH PIGTAIL BOLT
The FSS-WS-SH Pole Bracket with Pigtail Bolt designed to suspend the aerial self-supporting cable clamps on wooden, concrete or metallic poles. The bracket and the bolt are made of hot-dip galvanized steel. The bracket can be fixed to round poles with the use of stainless steel tape.
FSS-SH POLE MOUNTED PIGTAIL BOLT
The FSS-SH pigtail bolt is used for direct installation on poles with installation holes. Made of hot-dip galvanised steel the bolt is well environmentally protected. The bolt is M16 threaded and available in the lengths of 160 mm, 200 mm, 300 mm, 350 mm, 400 mm.
FSS-WE-SHE WALL-MOUNTED BRACKET WITH PIGTAIL BOLT
The FSS-WE-SHE Wall-Mounted Bracket with Pigtail Bolt is designed to suspend the aerial customer drop cable anchor clamp. Made of hot-dip galvanised steel the bracket and the bolt are well environmentally protected. The bracket can be mounted to the building flat fasade with the use of M8 expansion bolts.
FSS-WS-U Universal Pole Bracket
FSS-SHE WALL-MOUNTED PIGTAIL BOLT
The FSS-SHE Wall-Mounted Pigtail Bolt is used in aerial networks for direct installation on the fasade of the building. Made of hot-dip galvanised steel the bolt is well environmentally protected.
SC/APC CUSTOMER DROP PIGTAIL/PATCHCORD
The bend insensitive customer drop pigtails/patchcords meet the requirements of modern FTTH aerial networks. Available in 1 or 2 fibre count options the customer drop cables are ideal for direct customer connections to the aerial distribution network. The drop pigtails/patchcords can be guided inside the building through the walls and floors and fixed to walls with the use special glue or standard cable clips. The drop cable outer sheath is low smoke halogen free and meets the international fire hazard regulations.
FSS-SH Pole Mounted Pigtail Bolt
NGO-12 OPTICAL WALL-MOUNTED OUTLET
The NGO-12 Optical Wall-Mounted Outlet is used as the FTTH optical network termination point in customer apartment. It can be installed directly on the wall or on 60 mm deep and 60 mm in diameter flush-mounted box. The outlet adapters are protected by the shutters which automatically close when connectors are removed from adapters.
FSS-SM12X200 MOUNTING BOLT KIT
The FSS-SM12x200 M12 threaded mounting bolt kit with washers and nut is used for installation of pole or wall-mounted brackets in FTTH aerial networks. Made of hot-dip galvanised steel the bolt kit is environmentally protected.
FSS-SHE Wall Mount Pigtail Bolt
DIRECT POLE MOUNT CABLE GUARDS - FSS-OS U-SHAPED POLE MOUNT CABLE COVER, FSS-RS CABLE PROTECTION PIPE
The FSS-OS Cable Guide or FSS-RS Cable Protection Pipe provide substantial mechanical protection for cables mounted on poles in aerial networks. The cable guards are made of hot-dip galvanised steel or PVC for longevity and durability. The cable guards are fixed to the pole with stainless steel band or screws. They are available in a variety of sizes depending on the diameter of applied cable.
FSS-RS-U POLE MOUNT CABLE GUARD SEAL
The FSS-RS-U Pole Mount Cable Guard Seal is used to seal the pole mount cable guard entries. The cable guard seals are available in a variety of sizes depending on the diameter of applied cable.
FSS-UD CABLE TO POLE SPACER
The FSS-UD Cable To Pole Spacers are used to provide a safe distance between an aerial cable and a pole. The separators are made of high quality UV stabilised plastic.
NGO-12 Wall Mount Fibre Optic Outlet with customer SC/APC terminated patchcord
FSS-TD VIBRATION DAMPERS FOR ADSS CABBLES
The FSS -TD dampers are used to limit vibrations that occur in ADSS cables. This is critical to apply the vibration dampers when the span length exceeds 80 m. The dampers are made of UV stabilised PVC. Available are three damper sizes for various cable outer diameters.
FSS-TS STAINLESS STEEL BAND
The FSS-TS stainless steel band is used for installation of cable accessories on the poles of fiber optic aerial networks. To tighten the band it is necessary to use the tensioning tool and stainless steel buckles. The buckles to be ordered separately.
FSS-TS-Z-20 BUCKLES FOR THE STAINLESS STEEL BAND
The FSS-TS-Z-20 buckles are made of stainless steel and are used to fasten the stainless steel band around a pole. FSS-TS Stainless Steel Band
