Programmable Touch Panel (gc Type)

Transcript

HMI PLC HMI SENSOR ENCODER COUNTER INFORMATION GC7 Features Programmable Touch Panel (GC Type) Inherited the GC-5□ display. - 10.4-inch TFT color Model number: GC-76LC - 5.7-inch STN color Model number: GC-73LCL-R - 5.7-inch STN monochrome Model number: GC-73LM-R HMI Lineup Panel Computer Programmable Touch Panel HMI Software ■Features   - Shifted from the GC50 series. - ScreenCreator5 is usable. The applications of the GC-50 series (GC-53LC3, GC-53LM3, and sGC56LC2) are partially inherited. The applications can be replaced within restrictions. ■Restrictions from the GC50 Series 1. Drawing software Prepare ScreenCreator5 Ver3.0 or later. You can download the drawing software from Koyo Electronics' website free of charge. 2. Panel cutout dimensions The panel cutout dimensions are not changed. The display can be installed in the existing holes for attaching the control panel as is. 3. Dimensions The 5.7-inch type is 7.1 mm thicker in depth. The 0.4-inch type is 3.0 mm wider in width. Since the location and size of mounting brackets and external connection connectors are different, make sure that there are no interfering parts inside and outside the board. The ScreenCreator5 drawing software has been upgraded. You can draw in the same way as with the GC-50 series. 7. Touch panel operation Since an analog-type touch panel is used, there are the following restrictions. - You cannot press two, three, or four points at the same time. - The resolution of the touch panel is different. Since the GC50 series has a different resolution (16 x 12 or 32 x 24) from the GC70 series (1,024 x 1,024), the operational feeling may be different. 8. When K-BASIC is used There are restrictions on usable instruction words. 9. When option products are used The digital I/O cannot be used. The backup data in a CF card is not compatible. If the data is backed up by a CF card for the GC50 series, restore the screen data to ScreenCreator5 once. Each setting data needs to be reset for the GC70 series. Visual Scope 4. Power Supply GC7 The 5.7-inch type is connected to the main body, not by terminal block but by connector (bundled item). The 10.4-inch type has been changed to 24 V DC specification. If you use the GC7 at 100 V/200 V AC, use the optional EA-AC or prepare a commercial AC/DC power supply. (If the EA-AC is used, the depth of the product becomes the main body + 36.1 mm.) 5. Confirmation of PLC models PLCs that can be used are largely limited. Also, the shapes of connection connectors are different. (M:N communications also cannot be used.) 10.How to download screen data Screen data can be transferred via USB. 11.Other There may be restrictions in addition to the items mentioned above. Viewing angle of the screen, appearance of reduced / enlarged characters, appearance of the black-and-white type (difference between blue type LCD and black-and-white mode), etc. * When you change models, it is recommended that you check the operations using actual equipment once. 6. Confirmation of peripheral devices The GC70 series has only one serial port. Also note that there are no parallel ports or RAS output / reset input. 352 KOYO ELECTRONICS INDUSTRIES CO., LTD. GENERAL CATALOG 2014 Latest catalog (free) is available online. Visit our website ▼ http://www.koyoele.co.jp/english/ HMI GC7 Specifications PLC HMI SENSOR ■How to Transfer Software ① Read the screen data project using ScreenCreator5 (Ver3.0 or later). ② Change the target panel to the new model (GC-73LM-R / GC-73LCL-R / GC-76LC) using ScreenCreator5 (Ver3.0 or later). ③ Recompile the screen data using ScreenCreator5 (Ver3.0 or later). ④ Download the compilation data to the new model using ScreenCreator5 (Ver3.0 or later). ENCODER COUNTER INFORMATION HMI Lineup * In a new model, it is not necessary to change to the download mode at hardware side like previous models. If the computer and the display are connected via a USB cable and the data is downloaded from a computer, the display automatically changes to the download mode and automatically restarts after the completion of the download. Panel Computer Programmable Touch Panel HMI Software ■Each Part Names and Descriptions Standard Expansion (Option is installed) 3 AC Power Supply Module (Option) 2 CF Card Slot 1 4 Various LEDs Not in Use 7 USB A Port 8 USB B Port 1 Power Supply (24 V DC) 1 2 3 4 5 6 7 8 Power supply (24 V DC) CF card slot AC power supply module (Option) Various LEDs Battery Serial port USB A port USB B port Can be used for the power supply in the same conditions as GC-53L□3. The screen data can be uploaded/downloaded from a CF card. Can be used with a power supply under the same conditions as the GC-56LC2. You can check the power supply / status / transmission and reception. Retain clock data / SRAM. For connection to a PLC The screen data can be uploaded/downloaded from a USB memory. The screen data can be uploaded/downloaded from drawing software.  ■Options Model Number AC Power Supply Module EA-AC Compact Flash EA-CF-CARD D-sub Terminal Block Conversion Adaptor (For RS-422/485) EA-EXP-OPT D-sub Angle Conversion Adaptor Surface Cover Visual Scope GC7 ■Connection Cables Name Protection Sheet 6 Serial Port 5 Battery EA-2CBL SJ, DL05/06/205, SZ, PZCPU Modular 6-pin EA-2CBL-1 DL06/205-1/260,SZ-4M,PZ3  High-density D-sub 15-pin EA-4CBL-1 D4-CPU programmer port D-sub 15-pin EA-4CBL-2 D4-CPU general-purpose port D-sub 25-pin EA-ADPTR-4 EA-MITSU-CBL-2 Mitsubishi computer link D-sub 9P For 5.7-inch type EA-6-COV2 EA-OMRON-CBL-1 D-sub 9-pin for Omron For 10.4-inch type EA-10-COV2 For 5.7-inch type GC-S3SH-32 For 10.4-inch type EA-10-COV3-SG Cable length: 3 m ■Expendable Supplies Name Gasket Mounting Brackets Backlight Unit for Replacement Model Number For 5.7-inch Type ー For 10.4-inch Type EA-10-GSK-SG For 5.7-inch Type EA-MG-BZ For 10.4-inch Type EA-BRK-2G For 5.7-inch Type ー For 10.4-inch Type Battery EA-10-BULB D2-BAT-1 Plug for Main Body Power Supply EA-DC-CON Plug for AC Power Supply EA-AC-CON The specifications and prices described in this catalog were valid when the catalog was issued. For the latest information, contact our sales persons or see our website. KOYO ELECTRONICS INDUSTRIES CO., LTD. GENERAL CATALOG 2014 353 HMI PLC HMI SENSOR ENCODER GC7 Specifications ■Main Body Specifications Model Number GC-73LM-R GC-73LCL-R GC-76LC STN monochrome LCD STN color LCD TFT color LCD Display Color Black-and-white mode (15 gradations) 256 color 65,536 color Number of Dots 320 x 240 (QVGA) Device Size 5.7-inch COUNTER Display Device INFORMATION Brightness Control* 1 Set from the system screen of the main body display. (Setting components can be arranged from the drawing software.) Backlight Cold-cathode tube  Average life: Continuous lighting for 50,000 hours or longer / 25˚C Display HMI Lineup Programmable Touch Panel External Interface 640 x 480 (VGA) Replacement of Backlight Impossible Touch Panel Analog resistive type, Resolution: 1,024 W x 1,024 H For PLC Connection Serial Panel Computer 10.4-inch Serial Possible Start-stop synchronization, RS-232C, RS-422/485 (2/4-wire system), D-sub 15-pin (Female) x 1 Data length: 7/8 bit, parity: None/Odd/Even, stop bit: 1/2 bit Transmission speed (bps): 1,200/2,400/4,800/9,600/19,200/38,400/57,600/115,200 Screen Data Transfer USB (B) 1.1 x 1 CF Card Slot 1 No USB USB (A) 1.1 x 1 Compact Flash (Limited to 3.3 V) TYPE I/II x 1* 2 HMI Software Supply Voltage 24 V DC Allowable Power Range 20.4 to 28.8 V DC, allowable ripple, within 100 mVp-p, allowable instantaneous power failure time, within 5 ms Power Consumption Approx.9 W (24 V DC, at main body standalone operation) GC7 Approx.17 W (24 V DC, at main body standalone operation) Use Ambient Temperature 0 to 50˚C Storage Ambient Temperature -20 to 60˚C Use / Storage Ambient Humidity 10 to 85% RH (No condensation) Noise Resistance 1000 V AC p-p, pulse width 1 μs, rise time 1 ns, between DC power supply input terminal and FG terminal (Cased on noise simulator) Withstand Voltage 1000 V AC, 1 min, between DC power supply input terminal and FG terminal Insulation Resistance 10 MΩ or higher (500 V DC), between DC power supply input terminal and FG terminal Vibration Resistance Compliant with JIS C 0911, vibration acceleration: constant acceleration 19.6 m/s 2, frequency range: 5 to 55 Hz to 5 Hz, vibration time: vertical direction (Y direction) 4H, horizontal and font-back direction (X and Z direction) 2H, sweep cycle: 5 → 55 → 5, 1 octave / min (10%) Impact Resistance Compliant with JIS C 0912, maximum acceleration 98 m/s 2 (10 G), duration of action: 11 ms, number of impacts: 10 times each in perpendicular direction Electrostatic Discharge General Specifications Resistance Visual Scope Approx.10 W (24 V DC, at main body standalone operation) Surrounding Atmosphere in Place of Use Atmospheric discharge: 8 kV, application places: bezel, touch panel, contact discharge: 4 kV, application places: left/right and front/back of the panel No corrosive gases Grounding D-class grounding Protective Structure IP65 (Only front, when gasket is used.) Dimensions (mm) 197 W x 152 H x 54.1 D Weight (g) 660 299.0 W x 209.0 H x 70.0 D Panel Cutout Dimensions (mm)* 7 179.0 W x 140.0 H Cooling System Natural air-cooling Compliant Standards UL508 (Scheduled to acquire), EMC directive (CE marking; Self-declared), CE EN61131-2, EMI CISPR11 Class A, unnecessary radiation measurement, field intensity measurement, magnetic field strength measurement (EN55011) EMS susceptibility immunity measurement Class A EN61000-4-2 Electrostatic discharge immunity test, EN61000-4-3 Radiation magnetic field immunity test, EN61000-4-4 First transient burst immunity test, EN61000-4-5 Surge immunity test, EN61000-4-6 Conductivity immunity test Accessories QSG (Quick Start Guide) manual Mounting brackets (4 units) Power plug 630 1480 85 W x 191 H QSG (Quick Start Guide) manual Mounting brackets (6 units) Power plug (Bundled with mounting brackets) *1 Since this display uses a cold-cathode tube for the backlight, the brightness widely fluctuates according to the conditions shown below. Consider the described brightness as a target. Ambient temperature, installation angle of the product, elapsed time since power-on, duration of use of the product, and number of product power supply ON/OFF cycles *2 Only the specific card can be used. * Regarding the EA-AC specifications, see P.349. 354 KOYO ELECTRONICS INDUSTRIES CO., LTD. GENERAL CATALOG 2014 Latest catalog (free) is available online. Visit our website ▼ http://www.koyoele.co.jp/english/ HMI GC7 Specifications Series KOSTAC-S Koyo DL Series MELSEC-AnN Mitsubishi Mitsubishi (AnN/AnS) (LINK) (High speed communication) Mitsubishi (AnA/AnU) (LINK) (High speed communication) Mitsubishi (QnA) (LINK) HMI Lineup Mitsubishi (QnA) (LINK) (High speed communication) Mitsubishi (QnA) (LINK) Panel Computer Mitsubishi (QnA) (LINK) (High speed communication) Omron (C) Programmable Touch Panel SYSMAC CQM1 Omron (C) HMI Software SYSMAC CS1 Omron (CS1) SYSMAC C Sharp New Satellite JW JTEKT TOYOPUC Yaskawa Inverter FACTORY ACE Yokogawa INFORMATION Koyo (DL Series MODBUS) Mitsubishi (AnN/AnS) (LINK) Mitsubishi (AnA/AnU) (LINK) MELSEC-Q Omron COUNTER Koyo (CCM3) Koyo (DL Series) MELSEC-AnS MELSEC-QnA ENCODER ScreenCreator5 ScreenCreator5 Properties of Project Koyo (KOSTAC S) MELSEC-AnA MELSEC-AnU HMI SENSOR ■List of Connected Devices Manufacturer PLC FA-M3 Temperature Controller Sharp (CPU direct connection) Sharp (LINK) JTEKT (PC2) JTEKT (PC3) Yaskawa (Inverter) Yokogawa (CPU_No.*) Yokogawa (CPU_No.*) (High speed communication) Yokogawa (CPU No. variable) Yokogawa (CPU No. variable) (High speed communication) Yokogawa (CPU No. variable) Yokogawa (CPU No. variable) (High speed communication) Omron (C) Mitsubishi (AnA,AnU) (LINK) Keyence KZ Series Mitsubishi (AnA,AnU) (LINK) (High speed communication) Mitsubishi (AnN/AnS) (LINK) Mitsubishi (AnN/AnS) (LINK) (High speed communication) Toyo Denki Digital Controller Toyo Denki (μ-GPCH) Supported PLCs as of May 2012 Largely restricted compared with the GC50 series. If devices other than those above are connected, it is impossible to shift to the GC70 series. Visual Scope GC7 The specifications and prices described in this catalog were valid when the catalog was issued. For the latest information, contact our sales persons or see our website. KOYO ELECTRONICS INDUSTRIES CO., LTD. GENERAL CATALOG 2014 355 HMI GC-73LM-R 177.6 CF SLOT 38.1 PLC HMI SENSOR ENCODER 191 188 5 GC7 179 +1 −0 152 15 15 6 22 C F S LOT 47.1 6 152 7 197 Dimensions 138.6 4.3 6 Hole 188.5±0.3 140 +1 −0 5.7 inch 8.8 4.3 4.3 6 ■Dimensions 152 GC-73LM-R 22 Hole 143 143.5±0.3 GC-73L□-R 188 232.6 COUNTER INFORMATION F S LOT CFCSLOT 47.1 44.1 10 4.311.8 258.5 197 87 GC-76LC 152 203.4 235 +1 −0 188.5±0.3 Hole Hole 143 177.6 143.5±0.3 179.7 +1 −0 8.4 inch 89.9 315.7 HMI Lineup C F S LOT 42.7 Panel Computer Programmable Touch Panel 117.5 8.8 4.3 10 11.8 10 8.811.8 4.3 4.3 9 10 GC-76LC 8.8 4.3 11.8 10 319.5 +1 −0 9 159.75 10 339.5 10 10 9 284 CF SLOT HMI Software 60 GC-76LC 7 12 299 10 280 315.7 285±0.5 142.5Hole 256.2 7 12 12 9 C F S LOT 42.7 9 339.5 10 209 10 190 Hole 319.5 +1 −0 159.75 130 9 191±0.5 10 10 9 95.5 EA-AC 12 9 Hole 256.2 280 42.7 260 +1 −0 315.7 93.0 inch 12.1 inch 10 9 260 +1 −0 130 CF SLOT 319 9 10 339.5 10 76.2 10.4 +1 −0 9 10 9 10 159.75 10 9 36.1±0.5 280 260 +1 −0 Hole 256.2 14.7 130 93.0 Visual Scope GC7 76.2 10 9 370.6 36.1±0.5 42 14.7 10 CF SLOT 396.8 9 11.4 285.2 310.8 374 +1 −0 187 9 11.4 9.5 11.4 Hole 288 +1 −0 15.0 144 11.4 9.5 356 KOYO ELECTRONICS INDUSTRIES CO., LTD. GENERAL CATALOG 2014 Latest catalog (free) is available online. Visit our website ▼ http://www.koyoele.co.jp/english/ inch HMI GC7 Correlation 5.7-inch Monochrome Compatibility GC-53LM3 △ Appearance Light gray Gray 197.0 W x 152.0 H x 54.1 D *Slightly thick Dimensions (mm) △ 197.0 W x 152.0 H x 47.0 D Panel Cutout Dimensions (mm) ○ 188.5±0.3 W x 143.5±0.3 H ENCODER 5.7-inch Color GC-73LM-R HMI SENSOR ■Compatibility with the GC50 Series Items PLC Compatibility GC-53LC3 △ GC-73LCL-R Light gray Gray COUNTER △ 197.0 W x 152.0 H x 47.0 D 197.0 W x 152.0 H x 54.1 D *Slightly thick INFORMATION ○ 188.5±0.3 W x 143.5±0.3 H Mounting Brackets × Both the position and shape are different. × Both the position and shape are different. Power Supply ○ 24 V DC ○ 24 V DC × Terminal block Connector × Terminal block Connector △ 5.7”(Blue, single gradation) 5.7”(Black-and-white mode, 15 gradations) ○ 5.7”color 5.7”color View Angle △ 30˚ (up/down) 30˚ (left/right) Room temperature (25˚C) 20˚ (up)40˚ (down) 45˚ (left/right) Room temperature (25˚C) △ 25˚ (up)70˚ (down) 35˚ (left/right) Room temperature (25˚C) 20˚ (up)35˚ (down) 50˚ (left/right) Room temperature (25˚C) Programmable Touch Panel Brightness △ 300 cd/m2 150 cd/m2 △ 250 cd/m2 200 cd/m2 ○ 50,000 hours ○ HMI Software Life 30,000 hours 50,000 hours Connector LCD Panel Touch Panel × Matrix (16 x 12 pieces) Analog type × Matrix (16 x 12 pieces) Analog type Serial Port 1 △ D-sub 9-pin (Female) D-sub 15-pin (Female) △ D-sub 9-pin (Female) D-sub 15-pin (Female) Serial Port 2 × Terminal block (RS-422/485) None × Connector (RS-422/485) None Screen Data Transfer △ Serial Port 1 USB (B) △ Serial Port 1 USB (B) △ The option is required. None Can be substituted with a USB memory There is no data compatibility with conventional models. × The option is required. None ScreenCreator5 ScreenCreator5 Ver3.0 or later CF Card △ The option is required. None Can be substituted with a USB memory There is no data compatibility with conventional models. Digital Input/Output × The option is required. None ScreenCreator5 ScreenCreator5 Ver3.0 or later Drawing Software △ △ HMI Lineup Panel Computer 10.4-inch Color Items Compatibility GC-56LC2 Appearance GC-76LC Gray Gray 299.0 W x 209.0 H x 70.0 D Dimensions (mm) △ 296.0 W x 209.0 H x 77.5 D Panel Cutout Dimensions (mm) ○ 285.0±0.5 W x 191.0±0.5 H Mounting Brackets × Both the position and shape are different. Power Supply △ 100 V/200 V AC 24 V DC *When used with 100 V/ 200 V AC, the optional EA-AC is required. × Terminal block Connector Connector ○ 10.4”color 10.4”color View Angle ○ 30˚ (up)20˚ (down) 45˚ (left/right) Room temperature (25˚C) 65˚ (up)45˚ (down) 65˚ (left/right) Room temperature (25˚C) Brightness ○ 200 cd/m2 270 cd/m2 LCD Panel ○ 25000 hours 50000 hours Touch Panel × Matrix (32 x 24 pieces) Analog type Serial Port 1 △ D-sub 9-pin (Female) D-sub 15-pin (Female) Serial Port 2 × Terminal block (RS-422/485) None Life Serial Port 3 × The option is required. None Screen Data Transfer △ Serial Port 1 USB (B) The option is required. Available Can be substituted with a USB memory There is no data compatibility with conventional models. CF Card △ Digital Input/Output × The option is required. None Parallel Ports × Available None × Available None △ ScreenCreator5 ScreenCreator5 Ver3.0 or later RAS Output Reset Input Drawing Software The specifications and prices described in this catalog were valid when the catalog was issued. For the latest information, contact our sales persons or see our website. Visual Scope GC7 KOYO ELECTRONICS INDUSTRIES CO., LTD. GENERAL CATALOG 2014 357