Transcript
14
+
HOURS BURN TIME
Regency CI2600 shown with the low profile faceplate.
Regency CI2600 Large Hybrid Catalytic Wood Insert
Featuring Eco-Boost Technology
EPA
APPROVED
79.7% EFFICIENCY
22"
MAX. LOG SIZE
sq.
2,600 ft.
HEATING CAPACITY
77,000 MAX BTU
2.6
cu. ft. FIREBOX
1.8
g/hr. EMISSIONS
One of the largest, most efficient wood burning inserts available in North America www.regency-fire.com
Style meets technology. The Regency CI2600 Large Wood Insert features a flush design, with 2 different stylish faceplate options – whether you prefer a contemporary look or a more traditional design. This highly efficient wood insert will heat homes up to 2600 square feet while meeting strict EPA standards.
A broad heating range means increased flexibility. The loading capacity combined with the controllable burn rate of our Eco-Boost technology provides flexibility to heat smaller homes with less reloading and large homes with the maximum capacity available. Regency CI2600 shown with the contemporary faceplate and optional backing plate.
Eco-Boost Technology The hybrid catalytic system allows the fuel to burn at a slower rate, delivering 14 or more hours of heat* with a single load of wood. Fuel is utilized to it’s full potential with only 1.8 g/hr. of emissions and 79.7% efficiency! Burn Overnight without re-Loading The large firebox measuring 2.6 Cubic Feet means you can load up overnight, without worrying about waking up to a cold house. Providing 14 hours or more* of consistent, reliable heat - the large firebox has room for up to a 22" log. Easy Single-Lever Operation A simple single-lever air control conveniently located at the front of the stove can be adjusted to meet home heat requirements, from a hot burn to a smoldering glow that keeps the chill away. Large View Cast Iron Door The heavy duty cast iron door offers a 250 square inch viewing area, delivering an excellent view of the stunning fire. The door opens to 110° making wood loading easier. Lifetime Warranty With over 35 years of wood stove manufacturing expertise, along with the most comprehensive warranty in the industry, the CI2600 is guaranteed to deliver a lifetime of dependable heat. The catalytic combustor is covered for the first six years. Consult the manual for complete details.
Standard Features
Optional Features
• Eco-Boost Technology • 2.6 cu. ft. firebox accommodating 22" logs • Single lever bypass damper • Single-lever air control • High performance brick-lined firebox • Clean glass airwash system • Contemporary cast iron door • 250 sq. inch viewing area • 110 degree opening door for easy loading • Quick access leveling bolts • Rollers for easy installation
• Low profile or Contemporary faceplate • Backing plate in 2 sizes • Concealed 2 speed blower • Digital Catalytic temperature gauge • Offset flue adapter for installation flexibility
Technology
Eco-Boost combustion technology
Heating capacity**
up to 2,600 sq. ft.
Firebox capacity
2.6 cu. ft.
Maximum BTUs*
382,000
Maximum BTUs per hour
77,000 ***
Log size
22 in.
Emissions
1.8 g/hr.
Efficiency
79.7%
Viewing area
250 sq. in.
Loading opening
20 in. W x 10 in. H
Temperature activated blower (optional)
125 CFM
Firebox construction
Heavy gauge premium steel
Burn Time*
14+ hrs
Vent
6 in. Width
Height
Depth
Minimum Fireplace Opening
28-13/16”
21-3/4"
19"
Faceplate Size
26"
40"
-
Optional Backing Plate
Width
Height
Standard
44"
29-7/8"
Oversized
48"
33-7/8"
* Length of burn time and BTU output depend upon wood species used, moisture content of wood, elevation, climate conditions and installation. ** Varies depending on home floor plan, house layout, heat loss of the house and quality/moisture content of wood. *** Based on 8,500 BTU’s per lbs.
How does Eco-Boost technology work? Secondary Air Tube
The secondary air tube, working with the catalyst, ensures the fuel is burned to its full potential resulting in low emissions and high heat output.
Catalytic Combustor
Create consistent heat by slowly re-burning wood smoke particles that would normally go up the chimney .
Heavy Duty Stainless Steel Flame Shield
Provides better distribution of gases over the catalyst and protects the catalyst from direct flame exposure.
Bypass Damper
Used to close the damper & engage the catalytic combustor.
Air wash System
Keeps the glass clean and provides an excellent view of the fire.
High Performance Bricks
Provides superior insulation and heat reflection.
Single Lever Air Control
Easily controls the heat output and intensity of the fire by adjusting the amount of air intake.
Blower
The 2-speed blower distributes heat throughout the room. Blower cassette can be removed for cleaning.
Combustion Air
Air from the room is drawn in for primary and secondary combustion.
Why Eco-Boost Technology? A Green Solution that will save you money
Higher Efficiency = Saves you Fuel, Money & Time.
Emissions
Efficiency $ $ $ $ $ $ $ $
EPA Non-Catalytic
EPA Eco-Boost
Open Fireplace
EPA Non-Catalytic
EPA Eco-Boost
40-80 g/hr
3-7 g/hr
1-2 g/hr
15% efficient
75% efficient
80% efficient
1-2 hr burn time
3 /16"
Adjacent Mantel** Side Wall Top combustible materials when installed into a masonry built fiof replace are(to listed below. Minimum Clearances to or factory (to Side of Door) Combustible Materials Door) B
CI2600
21-5/8"
14"
Side Facing A (to Side of Door) D
12-3/16"
7-3/8"
Minimum Hearth B Extension* E
Top Facing (to Top of Door)
Minimum Hearth Side Extension* F
21-5/8"
US 16" Canada 18"
8"
1
40"
9 Side Facing (to Side of Door)
Minimum Hearth Extension*
Minimum Hearth Side Extension*
C
D
E
F
14"
7-3/8"
US 16" Canada 18"
8"
26"
Minimum Hearth Extension for the front (E) and sides (F) are measured from the fuel door opening.
installed made of mbustible
stible (i.e., , etc.) Any products, d.The floor of thermal esistance)
* Side hearth extension for Canada measured from side of appliance. F
* Hearth to have minimum: R value of 2.13 or greater.
Clearance diagram for Installations
** A non-combustible mantel may be installed at a lower height if the framing is made of metal studs covered with a noncombustible board.
Your Regency Dealer Is
Minimum Hearth Extension for the front (E) and sides (F) are measured from the fuel door opening.
TERNATE FLOOR PROTECTION MATERIALS ARE ACCEPTABLE
m) brick mineral
cification
Step (b): Calculate R of proposed system. 4" brick of C = 1.25, therefore Rbrick = 1/C = 1/1.25 = 0.80 1/8" mineral board of k = 0.29, therefore Rmin.bd. = 1/0.29 x 0.125 = 0.431 Total R = Rbrick + Rmineral board = 0.8 + 0.431 = 1.231. Step (c): Compare proposed system R of 1.231 to specified R of 0.893. Since proposed system R is greater than required, the system is acceptable.
** Max. mantle depth is 10” (254mm)
DEFINITIONS Thermal Conductance:
C
=
Btu (hr)(ft2 )(oF)
=
W (m2))(K)
Thermal Conductivity:
k = (Btu)(inch) = W (hr)(ft3)(oF) (m)(K)
= Btu (hr)(ft)(oF)
Thermal Resistance:
R
=
(ft2)(hr)(oF)
=
(m2)(K)
13.5°
31/16"
211/2"
31/16"
40"
40"
133/8"
26" 40"
13.5
26"
26" 26"
40"
27 3/4"
211/2"
27 3/4" 27 3/4"
27 3/4"
29" 40"
Low Profile Faceplate
the unit is bottom of or protecmbustible e US and e unit and
be 3/8" of 0.84.
1815/16"
Side and Top facing is a maximum of 1.5" thick.
.
133/8"
1
31/16"
" thick.
measured
28 7/8"
1815/16"18 /2"
Measurements A,B,C,D are from Top/Side of Door
are from Top/Side of Door
28 7/8" 18 1/2"
Dimensions 1815/16"
Contemporary Faceplate
BUILT FIREPLACE CLEARANCES
Top Facing (to Top of Door C
14+ hr burn time
28 7/8" 18 1/2"
1815/16"
The minimum required clearances to combustible materials when | installation installed into a masonry or factory built fireplace are listed below.
Mantle ** (to Top of Door)
8-10 hr burn time 28 7/8" 18 1/2"
Minimum Clearances to Combustible Materials
6"
$
Open Fireplace
Specifications
ent Wall de or)
$$
26"
40"
CI2600 | wood insert
40" 26" 26"
29"
29"
CI2600 | wood insert
Optional Backing Plate
Width
Height
Standard
44"
29-7/8"
Oversized
48"
33-7/8"
29"
These are guidelines only, subject to change without notice. Always refer to the actual product manual that comes with your unit for specific, current dimensions and clearances. © 2014 FPI Fireplace Products International Ltd. Regency is a registered or proprietary trademarks of FPI Fireplace Products International Ltd. All rights reserved. Printed in Canada (03/14) Part no. 944-419
