Transcript
www.hypro-eu.com
Protective Clothing
Protective Clothing Recent European legislation with regard to personal protective equipment (PPE), demands that employers must look after the health and safety of their employees and any other persons affected by their operations. Under the Health and Safety of Work Act 1974, employers may be liable to legal action by the HSE for failing to supply employees with the required degree of protection from the hazards of their work. Hypro have investigated the requirements of this legislation relevant to the application of crop protection chemicals and have introduced a range of clothing and equipment to provide the levels of protection demanded. The range includes durable sprayer wear, plus gloves, aprons, masks and respiratory protection, all produced to CE classifications as follows:EN 465 1995 EN 467 1995 EN 405 EN 374.3 1994 EN 166 (BS2092)
Type 4 spray tight protection. CE marked category III (1 piece) Providing chemical protection to parts of the body (2 piece) Filtering masks or half masks against gases or gases and particles CE Marked category III (gloves) Face sheilds (Browguard visor)
COSHH regulations demand that, prior to selection of personal protective equipment, the employer must provide the level of protection necessitated by the hazard present where operations take place, using the guidance provided by the manufacturer of the chemical to be applied.
Guidance for the Selection of Suitable Protective Clothing - Applying Pesticides HAZARD as indicated on the label
Preparing pesticide in any form for use
Liquids
Granules
Dusts, fogs, smokes vapours
Placement sprayers outdoors (including vehicle mounted and hand held sprayers)
Placement Handling sprayers contaminated indoors and air equipment, containers assisted and freshly treated broadcast and material downcast directed sprayers
Simplex Range Durable Spray Wear
COVERALL
COVERALLS
C E standard Small Medium Large Extra Large
All made from polyurethane on nylon material with sealed seams these coveralls offer 100% waterproof protection and excellent chemical resistance. All suits feature a hood, zip and velcro fronts. Material remains supple at low temperatures, yet is tough and durable.
EN 465 1995 Part No. 76SP6304-S Part No. 76SP6304-M Part No. 76SP6304-L Part No. 76SP6304-EL
Material: Green elastomised PVC fabric on a polyester base
TWO-PIECE SUIT
Style: One piece hood, zip front and double storm facing secured with studs. Elasticated wrists
Unique jacket and trouser design in green with elasticated waist. Simpler to put on with good air circulation for improved comfort.
Protection level: Type 4 spray tight protection
Small/Medium Jacket Small/Medium Trousers Small/Medium Jacket/Trouser Set Large Jacket Large Trousers Large Jacket/Trouser Set
JACKET C E standard Small Medium Large Extra Large
EN 467 1995 Part No. 76SP6294-S Part No. 76SP6294-M Part No. 76SP6294-L Part No. 76SP6294-EL
XLarge Jacket XLarge Trousers XLarge Jacket/Trouser Set Single Piece Small/Medium Single Piece Large/XLarge
TROUSERS C E standard Small Medium Large Extra Large
corrosive
EN 467 1995 Part No. 76SPCSTE-S Part No. 76SPCSTE-M Part No. 76SPCSTE-L Part No. 76SPCSTE-EL
Part No. 76000028 Part No. 76000029 Part No. 76000030 Part No. 76000004 Part No. 76000005
Tough, lightweight, polyurethane back nylon with stitched ties. Hose down when splashed.
Part No. 76000006
Protection level: Providing chemical protection to parts of the body. This garment does not provide Type 4 spray tight protection
APRON
Key to Protective Clothing
C E standard One size
EN 467 1995 Part No.76SP6295
Material: Green PVC coated nylon fabric with high frequency welded and sewn seams Respirator
Boots
Apron
Sleeves Worn Over Gloves
LURMARK 76000037 NOT 76SP6295 PART NO. HALF MASK AVAILABLE APRON NOTES CLASSIFICATION
76000024 76000025 76000026 76000027
Style: With elasticated waist
not classified on label
KEY TO PROTECTIVE CLOTHING SYMBOLS
No. No. No. No.
APRON
Material: Green elastomised PVC fabric on a polyester base harmful/irritant
Part Part Part Part
Standard lightweight yet tough suit for most spraying applications.
Protection level: Providing chemical protection to parts of the body. This garment does not provide Type 4 spray tight protection
REDUCED VOLUME APPLICATION NOT PERMITTED
toxic
Part No. 76000022 Part No. 76000023
SINGLE PIECE OVERALLS
Material: Green elastomised PVC fabric on a polyester base Style: With hood, zip front, storm facing with velcro closure. Elasticated wrists
very toxic
www.hypropumps.com
Durable Spray Wear Defender Range
EN405
Hood 76000037 HALF MASK
EN467
Full Face Piece Respirator
Gloves
Face Shield
7600007 76SP6304 776000008 76000011 STATE SIZE BROWGUAR SIZE 8 & 11 S, M, L & XL D & VISOR EN374
124
Coverall
EN465
EN166
Style: 48” x 36” (approx 120cm x 90cm) eyeletted at bib complete with PVC ties Protection level : Providing chemical protection to parts of the bodyThis garment does not provide Type 4 spray tight protection
Jacket and Trousers 125
Coverall and half mask
www.hypro-eu.com
Spray Guns and Lances
Protective Clothing Respiratory Protection
SPRAY GUN Plastic lightweight spray gun manufactured from polyacetal, PVC and stainless steel with viton seals. Will accept all Lurmark tips. 1⁄2” BSP(F) hose connection. Maximum pressure 50 Bar (725 psi) Maximum flow 70 L/min (15 gpm)
HALF MASK C E standard One size Replacement filters (CE0121)
EN 405 Part No. 76000037 Part No. 76000038
Part No. 01506622
Style: Durable half mask with disposable chemical cartridge filters Protection level: Filtering half masks against gases or gases and particles. Offers protection level FFA1B1E1K1-P3 against organic gases and vapours (boiling point greater than 65°), inorganic gases, acid gases and ammonia. Fitted with a particulate filter disc to EN143 protection level P3SL against all dusts, mists and fumes.
BRASS VALVE AND LANCE Heavy duty brass valve and lance with on/off control and spray pattern adjustment via twist handle. Overall length 60cm. Supplied complete with nozzle. Connect using brass hosetail shown below. Maximum pressure 50 Bar (725 psi)
HIGH PRESSURE GUN AND LANCE
FUMEGA MASK C E standard One size
For pressure washing purposes this trigger operated gun features brass and stainless steel wetted parts encased in shock resistant GRP. Maximum pressure 300 Bar (4350 psi), Maximum flow rate 50 L/min (9 gpm)
CE 930120 - EN149 Part No. 76000021 Half Mask
Style: Disposable
High Pressure Gun 120cm Extension Lance Any Lurmark spray tip can be used by specifying Nozzle Holder and Cap Nut Part Numbers
www.hypropumps.com
Protection level: Suitable for the filtering of various dusts, mists and vapours. Offers a lower level of protection than item Part No. 76000037
Accessories
FOOD AND FUEL DECANTING GUNS
GLOVES
Polypropylene and aluminium guns with a variety of seal materials for the transfer of liquid food-stuffs and fuels.
C E standard Size 8 Size 11
EN 374.3 1994 Part No. 76000007 Part No. 76000011
Material: Green - Solvent resilient nitrile film. Style: Unflocked lining. textured grip surface. Specification: Length - 330mm. Thickness 0.38mm
BROWGUARD VISOR C E standard One size
Part No. 01DJ0022
EN 166 Part No. 76000008
Polypropylene Gun with Nitrile Seals for General
Connection 1 ⁄2” Hosetail 3 ⁄4” Hosetail
Part No. 01506532 01506530
Duties and Fuel Transfer Polypropylene Gun with Viton Seals for Food or
1
1” Hosetail ⁄2” Hosetail 3 ⁄4” Hosetail
01506531 01506542 01506540
Corrosive Liquid Transfer Aluminium Gun with Revolving Coupling
3
1” Hosetail ⁄4” Hosetail 1” Hosetail
01506541 01506515 01506516
Part No. 01MV0801 Part No. 011EL120 Part No. 2410104M and 241030
HEAVY DUTY SPRAY GUN Heavy duty gun with on/off control trigger and variable spray pattern from solid steam to wide angle using lance handle. Supplied complete with nozzle. Connect using brass hosetails shown below. Maximum pressure 58 Bar (840 psi). Part No. 01ADJ001
Style: Adjustable to fit.
SPARE NOZZLES for 01ADJ001: 1.8mm Hollow Cone Nozzle 2mm Hollow Cone Nozzle 2.3mm Hollow Cone Nozzle 3mm Hollow Cone Nozzle 4mm Hollow Cone Nozzle 5mm Hollow Cone Nozzle 126
BRASS HOSETAILS Brass hosetails for use with heavy duty spray guns 01DJ0022 and 01ADJ001 1 ⁄2” BSP(F) Cap: 8mm Liner 1 ⁄2” BSP(F) Cap: 10mm Liner 1 ⁄2” BSP(F) Cap: 13mm Liner
01180213 01180214 0118021 01180217 01180219 01180221 127
01CLHA01 01CLHA02 01CLHA03
