Protective Enclosure For Outdoor Applications Technical Handbook Pictures For Illustrative Purposes

Transcript

Technical handbook Protective enclosure for outdoor applications Pictures for illustrative purposes Pictures for illustrative purposes 2 PROTECTIVE ENCLOSURE FOR OUTDOOR APPLICATIONS Contents What is in the box 4 Overall dimentions & weight 5 to 7 Component parts 8 Installation Steps 9 Step 1 - Positioning & attachment to wall 10-11 Please refer to appropriate humidifier technical manual for the next steps. Pictures for illustrative purposes 3 PROTECTIVE ENCLOSURE FOR OUTDOOR APPLICATIONS What is in the box Any loss or damage during delivery should be reported to carrier by registered letter within 3 working days and be advised to devatec or to authorized dealer. What is in the box : 1. A protective cabinet for outdoor applications inclusive of a factory built-in humidifier 2. A humidifier factory set inside the protective cabinet 3. The draining hose(s) appropriate to the humidifier 4. 3/4" FF stainless steel braided water inlet hose (with gaskets) for connection to water mains 5. Steam hose clamps : ELMC 1 cylindre & RTH-LC: 2 clamps ELMC 2 cylindres: 4 clamps ELMC 3 cylindres: 6 clamps RTH 1 steam tank: 2 clamps RTH 2 steam tanks: 4 clamps 1 2 3 4 5 Pictures for illustrative purposes 4 PROTECTIVE ENCLOSURE FOR OUTDOOR APPLICATIONS Dimensions & Weight D Dimensions in mm Water Steam inlet outlet Protective cabinet Model A B C D E F G H Weight in Kg Steam Drain outlet outlet spacing I J Drain outlet spacing K Electrics & control signal inlet Empty With humidifier L MC 5 to 990 1470 30 500 507 200 1870 300 245 320 600 35 57 RTH-LC 990 1470 500 507 200 1870 300 245 320 600 35 60 Pictures for illustrative purposes 5 PROTECTIVE ENCLOSURE FOR OUTDOOR APPLICATIONS Dimensions & Weight J G Dimensions in mm Protective cabinet (s.a. index on page 5) Model A B C D Water Steam inlet outlet Weight in Kg Steam outlet spacing Drain outlet Drain Electrics & outlet control spacing signal inlet Empty With humidifier E F G H I J K L MC 40 1500 1470 500 1007 to 60 200 2870 650 345 300 300 250 1150 45 75 MC 90 1500 1470 500 1007 200 2870 650 250 275 300 250 1150 45 90 Pictures for illustrative purposes 6 PROTECTIVE ENCLOSURE FOR OUTDOOR APPLICATIONS Dimensions & Weight J G Dimensions in mm Protective cabinet (s.a. index on page 5) Modèle RTH 5 to 50 A B C D E Water Steam inlet outlet F G H 1500 1470 500 1007 200 2870 650 528 RTH 60 1500 1470 to 100 500 1007 200 2870 650 271 Weight in Kg Electrics & Overcontrol flow signal inlet Empty Steam outlet spacing Drain outlet I J L M 300 1150 450 50 95 550 1150 450 50 120 538 With humidifier Pictures for illustrative purposes 7 PROTECTIVE ENCLOSURE FOR OUTDOOR APPLICATIONS Component parts EXAMPLE WITH ELMC 5 to 30 7 8 1 2 3 4 5 6 1 Outdoor protective cabinet 5 Fan for internal ventilation 2 ElectroVap humidifier 6 Grommet for electrical wire & control signal 3 3/4" FF braided water inlet hose 7 Steam hose connecting union 4 Drain hose 8 Funnel for steam hose connection Pictures for illustrative purposes 8 PROTECTIVE ENCLOSURE FOR OUTDOOR APPLICATIONS Installation steps All works concerned with the installation must be carried out by a skilled and qualified personnel. Please read, heed and follow the enclosed information for ensuring a correct installation of the equipment to the electrical, steam and water networks. Please call devatec if any technical support is needed Failure to adhere to the manufacturer’s recommendations for the installation will invalidate our warranty. INSTALLATION STEPS Step 1 - Placing and attachment to wall Step 2 - Connecting the drainning system (please refer to the technical manual of the appropriate humidifier) Step 3 - Connecting the water inlet (please refer to the technical manual of the appropriate humidifier) Step 4 - Connecting the electrical wires (please refer to the technical manual of the appropriate humidifier) Step 5 - Setting up (please refer to the technical manual of the appropriate humidifier) Step 4 Step 1 Take care not to sag the hose to prevent pokets of water (s.a. technical manual of the humidifier concerned) Step 2 Step 3 Most important : It is essential to ensure an anti-frozen tracing on the humidifier water feeding line up to the humidifier water inlet valve. Pictures for illustrative purposes 9 PROTECTIVE ENCLOSURE FOR OUTDOOR APPLICATIONS Installation - Step 1 PLACING THE CABINET Important information : The best performances of the humidifier being achieved when the steam discharge is made at short distance from the humidifier so place the cabinet at the shortest distance possible to the steam pipe(s). Consider free space around the cabinet to allow easy access for maintenance purposes (c.f. schemes underneath). (dimensions in mm) Caution : In case of high winds, take care to block the front doors opened or take them off if inside maintenance is required. Pictures for illustrative purposes 10 PROTECTIVE ENCLOSURE FOR OUTDOOR APPLICATIONS Installation - Step1 ATTACHMENT The protective cabinet must be strongly set on ground. For fastening your protective cabinet, use fastening material appropriate to the surface on which it must be set. The bolts should have a diameter of no less than 8mm. Protective cabinet for ElectroVap MC 5 to 30 & RTH-LC humidifier (dimensions in mm) Cabinet for ElectroVap MC 40 to 90 & RTH-V2 5 to 100 humidifier (dimensions in mm) Pictures for illustrative purposes 11 Rue Feu St Eloi 76550 Ambrumesnil - France LR 94104-2 Division export: tel. +33 (0)2 35 83 06 44 ou +33 (0)2 35 83 03 86 fax. +33 (0)2 35 85 36 72 Email: [email protected] - www.devatec.com Division france: tel. 02 35 04 61 41- fax. +33 (0)2 35 04 61 62 Email: [email protected] - www.devatec.com devatec reserves the right to change specifications or design of the equipment described in this brochure without prior notice. Pictures for illustrative purposes 12