Transcript
PS-12180HD-M5
12 Volt 18.0 AH
Features
Terminals: (mm)
•
Heavy duty construction
•
High vibration tolerance
•
Absorbent Glass Mat (AGM) technology for superior performance
•
Valve regulated, spill proof construction allows safe operation in any position
•
Power/volume ratio yielding unrivaled energy density
•
Rugged impact resistant ABS case and cover (UL94-HB)
•
Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified
•
U.L. recognized under file number MH 20845
Performance Specifications Nominal Voltage........................................................12 volts (6 cells)
• T 12 - Threaded insert with 5mm stud
T12
Nominal Capacity
12mm
20-hr. (900mA to 10.80 volts) ........................................... 18.0 AH
M5
10-hr. (1.7A to 10.80 volts) .............................................. 16.7 AH
3mm
5-hr.
(3.0A to 10.50 volts) .............................................. 15.1 AH
1-hr.
(11.1A to 9.60 volts) .............................................. 11.1 AH
15-min. (31.9A to 9.60 volts).................................................. 8.0 AH
Physical Dimensions: in (mm)
Approximate Weight ........................................ 13.38 lbs. (6.07 kg) Energy Density (20-hr. rate) ................ 1.53 W-h/in3 (93.51 W-h/l) Specific Energy (20-hr. rate) ............. 16.10 W-h/lb (35.59 W-h/kg)
W
Internal Resistance (approx.) ........................................ 8 milliohms Max Discharge Current (5 Min.) ................................ 57.9 amperes Max Short-Duration Discharge Current (5 Sec.)...... 270.0 amperes
9
Shelf Life (% of nominal capacity at 68°F (20°C)
8
MO DE L
13340 01333
S ealed R echargeable B attery
P S -12180HD-M5
1 Month .................................................................................. 97% HT
H
12 Volt 18.0 Amp. Hr.
6 Months ................................................................................ 83% MH20845
120180840411
BA
R is k of fire, explos ion, or burns .
US T B E R
Pb
YCLE D
TTE RY
M
Warning:
EC
R echargeable S ealed L ead-Acid B attery DC power, cons tant voltage charge C ycle us e: 14.4 - 15.0V (20 C ) S tandby us e: 13.5 - 13.8V (20 C ) Initial current: 5.4A MAX
Do not dis as s emble, heat above 60 C , or incinerate.
3 Months................................................................................. 91%
NONS P IL L A B L E
L L: 7.14 (181) W: 3.03 (77) H: 6.59 (167) HT: 6.59 (167) Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice.
Operating Temperature Range Charge. ................................................. -4°F (-20°C) to 122°F (50°C) Discharge............................................. -40°F (-40°C) to 140°F (60°C) Case................................................................................... ABS Plastic Power-Sonic Chargers................................PSC-122000A, 124000A, .................................................................. 122000A-C, 124000A-C
To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. All data subject to change without notice.
PS-12180HD-M5 12 Volt 18.0 AH
®
Discharge Characteristics
100
Charging is not necessary unless 100% of capacity is required.
80
Charging before use is necessary to help recover full capacity.
5oC (41oF)
60 o
30 C o (86 F)
40oC (104oF)
40 0
14.0
0
2
4
6
8
10
Charge may fail to restore full capacity. Do not let batteries reach this state.
20oC (68oF) 12
14
16
18
20
o
12.0 11.0 10.0 9.0
2.4
6
12
24 36 48 1
2
Discharge Time
4 6 8 10
20 4 0
h
Life Characteristics in Stand-By Use
5
Retention Capacity (%)
h
18
min
20 15 10 Discharge Time
0.90
36
1.2
Discharge Time vs. Discharge Current
1.8
3.6
9.0
Final Voltage
8.0
Standing Period (Months)
o
Ambient Temperature 20 C (68 F)
13.0
Terminal Voltage (V)
Capacity Retention Ratio (%)
Shelf Life & Storage
Final Voltage 10.5V
2
10.2V
1 9.6V
min
30
9.0V
10 5
o
8.1V
0.90
1.8
3.6
9.0
18
80 60
20 0
o
Note: Due to the self-discharge characteristics of this type of battery, it is imperative that they be charged within 6 months of storage, otherwise permanent loss of capacity might occur as a result of sulfation.
Chargers Power-Sonic offers a wide range of chargers suitable for batteries up to 100AH. Please refer to the Charger Selection Guide in our specification sheets for “C-Series Switch Mode Chargers” and “Transformer Type A and F Series”. Please contact our Technical department for advice if you have difficulty in locating suitable models.
1
2
3
4
Life Characteristics in Cyclic Use 120
Retention Capacity (%)
Discharge Current (A)
“Float” or “Stand-By” Service: Hold battery across constant voltage source of 13.5 to 13.8 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition.
0
Years
36
Cycle Applications: Limit initial current to 5.4A. Charge until battery voltage (under charge) reaches 14.4 to 14.7 volts at 68°F (20°C). Hold at 14.4 to 14.7 volts until current drops to under 180mA. Battery is fully charged under these conditions, and charger should be disconnected or switched to “float” voltage.
Float Charging Voltage 2.25 - 2.30 V/Cell
40
40 C (104 F) o o 20 C (68 F) o o 0 C (32 F)
Charging
Ambient Temperature 20˚C (68˚F)
100
100 80 60
Discharge Depth 100%
Discharge Depth 50%
Discharge Depth 30%
40 1. Discharge Current 0.2C (Final Voltage 1.7V/Cell) 2. Charge Current: 0.1C 3. Ambient Temperature: 20oC to 25oC (68oF to 77oF)
20 0
0
200
400
600
800
Number of Cycles
1000
1200
