Transcript
PS-1290
12 Volt 9.0 AH Features
• Absorbent Glass Mat (AGM) technology for superior performance • Valve regulated, spill proof construction allows safe operation in any position • Power/volume ratio yielding unrivaled energy density • Rugged impact resistant ABS case and cover (UL94-HB) • Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified • U.L. recognized under file number MH 20845
Terminals
Performance Specifications
(mm) 3.4
• F2 - Quick disconnect tabs, 0.250” x 0.032” - Mate with AMP. INC FASTON “250” series
Nominal Voltage ........................................................................ 12 volts (6 cells) 6.35
20-hr. (450mA to 10.50 volts) ....................................................... 9.00 AH
7.95
• NB - Tin plated brass posts with nut & bolt fasteners
0.8 1
5.5
12
4.7
Nominal Capacity
12
10-hr.
(810mA to 10.50 volts) ......................................................... 8.10 AH
5-hr.
(1.44A to 10.20 volts) ........................................................... 7.20 AH
1-hr.
(5.4A to 9.00 volts) .............................................................. 5.40 AH
15-min. (14.4A to 9.00 volts) .............................................................. 3.60 AH
Physical Dimensions: in (mm)
Approximate Weight ........................................................... 6.00 lbs. (2.72 kg) Energy Density (20-hr. rate) .............................. 1.92 W-h/in3 (116.94 W-h/l) Specific Energy (20-hr. rate) ............................. 18.00 W-h/lb (39.68 W-h/kg)
W
Internal Resistance (approx.) ...................................................... 13 milliohms Max Discharge Current (7 Min.) ................................................ 27.0 amperes Max Short-Duration Discharge Current (10 Sec.).................. 90.0 amperes Shelf Life (% of nominal capacity at 68°F (20°C)) 1 Month ...................................................................................................... 97%
Sealed Rechargeable Battery
HT MODEL ®
12 Volt
3 Months..................................................................................................... 91%
PS-1290 F2 8.5 Amp. Hr.
www.power-sonic.com
C
Pb MH20845
H
NO NS P ILLA B LE
L
F2: L: 5.95 (151) W: 2.56 (65) H: 3.70 (94) HT: 3.86 (98) NB: L: 5.95 (151) W: 2.56 (65) H: 3.70 (94) HT: 4.15 (106) Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice.
6 Months .................................................................................................... 83% Operating Temperature Range Charge.. ........................................................... -4°F (-20°C) to 122°F (50°C) Discharge ....................................................... -40°F (-40°C) to 140°F (60°C) Case ...................................................................................................... ABS Plastic Power-Sonic Chargers ................................................ PSC-12800A, 12800A-C
To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. All data subject to change without notice.
www.sealedperformance.com.au
PS-1290 12 Volt 9.0 AH ®
Discharge Characteristics
100
Charging is not necessary unless 100% of capacity is required.
80
Charging before use is necessary to help recover full capacity.
5oC (41oF)
60 o
30 C o (86 F)
40oC o (104 F)
40 0
14.0
0
2
4
6
8
10
Charge may fail to restore full capacity. Do not let batteries reach this state.
20oC (68oF) 12
14
16
18
o
o
Ambient Temperature 20 C (68 F) 13.0
Terminal Voltage (V)
Capacity Retention Ratio (%)
Shelf Life & Storage
12.0 11.0 10.0
4.5
9.0
Final Voltage
20 8.0
Standing Period (Months)
9.0 18
1.2
Discharge Time vs. Discharge Current
0.90 0.45
1.8
2.4
6
12
24 36 48 1
2
min
4 6 8 10
20 4 0
h Discharge Time
Life Characteristics in Stand-By Use
Discharge Time
5
Retention Capacity (%)
h
20 15 10 Final Voltage 10.5V
2
10.2V
1 9.6V
min
30
9.0V
o
Ambient Temperature 20˚C (68˚F)
100 80 60
Float Charging Voltage 2.25 - 2.30 V/Cell
40 20 0
o
0
1
2
40 C (104 F) o o 20 C (68 F) o o 0 C (32 F)
10 5
3
4
Years
8.1V
Life Characteristics in Cyclic Use 0.45
0.90 1.8
4.5
9.0
18
120
Discharge Current (A)
Charging Cycle Applications: Limit initial current to 2.7A. Charge until battery voltage (under charge) reaches 14.4 to 14.7 volts at 68°F (20°C). Hold at 14.4 to 14.7 volts until current drops to under 90mA. Battery is fully charged under these conditions, and charger should be disconnected or switched to “float” voltage. “Float” or “Stand-By” Service: Hold battery across constant voltage source of 13.5 to 13.8 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. Note: Due to the self-discharge characteristics of this type of battery, it is imperative that they be charged within 6 months of storage, otherwise permanent loss of capacity might occur as a result of sulfation.
Chargers
Retention Capacity (%)
100 80 60
Discharge Depth 100%
Discharge Depth 50%
Discharge Depth 30%
40 1. Discharge Current 0.2C (Final Voltage 1.7V/Cell) 2. Charge Current: 0.1C 3. Ambient Temperature: 20oC to 25oC (68oF to 77oF)
20 0
0
200
400
600
800
1000
1200
Number of Cycles
Further Information
Power-Sonic offers a wide range of chargers suitable for batteries up to 100AH. Please refer to the Charger Selection Guide in our specification sheets for “C-Series Switch Mode Chargers” and “Transformer Type A and F Series”. Please contact our Technical department for advice if you have difficulty in locating suitable models.
Please refer to our website www.power-sonic.com for a complete range of useful downloads, such as product catalogs, material safety data sheets (MSDS), ISO certification, etc..
Contact Information DOMESTIC SALES Tel: (07) 3386 1102 Fax: (07) 3102 9913
[email protected]
www.sealedperformance.com.au 1 Ant Road, Yatala Brisbane QLD 4207 Brisbane, QLD 4207
© 2015. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners. 0810 1M