Preview only show first 10 pages with watermark. For full document please download

Ps-612

   EMBED


Share

Transcript

Rechargeable Sealed Lead-Acid Battery PS-612 6 Volt 1.3 Amp. Hrs. Features: Absorbent Glass Mat (AGM) technology for superior performance. Valve regulated, spill proof construction allows safe operation in any position. Power/volume ratio yielding unrivaled energy density. Rugged ABS plastic case and cover Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified. U.L. recognized under file number MH 14328. PERFORMANCE SPECIFICATIONS Nominal Voltage....................................................................................................................................................... 6 volts (3 cells in series) Nominal Capacity 20 hour rate (65mA to 5.25 volts) ..................................................................................................................................... 1.30 A.H. 10 hour rate (120mA to 5.25 volts) ..................................................................................................................................... 1.20 A.H. 5 hour rate (210mA to 5.10 volts) ..................................................................................................................................... 1.05 A.H. 1 hour rate (720mA to 4.50 volts) ..................................................................................................................................... 0.72 A.H. Approximate Weight......................................................................................................................................................... 0.6 pounds (0.3 kg) Energy Density (20 hour rate).............................................................................................. 1.09 Watt-hours/cubic inch (65.7 Watt-hours/l) Specific Energy (20 hour rate)................................................................................................. 13.0 Watt-hours/pound (26.0 Watt-hours/kg) Internal Resistance (Fully Charged Battery)................................................................................................... 70 milliohms (approximately) Maximum Discharge Current ( <_ 7 Min.)................................................................................................................................... 3.9 amperes Maximum Short-Duration Discharge Current ( <_ 10 Sec.)...................................................................................................... 13 amperes Terminal configurations ................................................................................................................. Quick disconnect tabs, 0.187” x 0.032” Mate with AMP. INC. FASTON “187” series Vibration Test (2000 cycles/minute, 0.10 inch excursion, 2 hours)................................................ No loss in capacity or performance Shelf Life — % of nominal capacity at 68o F (20o C) 1 Month.......................................................................................................................................................................................... 97% 3 Months.................................................................................................................................................................................... 91% 6 Months.................................................................................................................................................................................... 83% Operating Temperature Range Charge.................................................................................................................................................................... -4oF (-20oC) to 122oF (50oC) Discharge............................................................................................................................................................... -4oF (-20oC) to 140oF (60oC) Case................................................................................................................................................................................................. ABS Plastic TECHNICAL DATA: PS-612 Discharge Characteristics 100 (V) Charging is not necessary unless 100% of capacity is required. 80 Charging before 5oC use is necessary (41oF) to help recover full capacity. 60 40oC (104oF) 40 o 30 C o (86 F) Charge may fail to restore full capacity. Do not let batteries reach this state. 20oC (68oF) 7.0 o 6.5 6.0 5.5 5.0 0.26A 2 4 6 8 10 12 14 16 18 20 Standing Period (Months) 0.13A 0.065A 0.65A 4.5 Final Voltage 4.0 0 0 o Ambient Temperature 20 C (68 F) Terminal Voltage Capacity Retention Ratio (%) Shelf Life and Storage 1.3A 3.6A 1.2 2.4 6 12 24 36 48 1 min. 2 4 6 8 10 hrs. 20 40 Discharge Time Life Characteristics in Stand-By Use o Discharge Time vs. Discharge Current o 20 15 10 80 Float Charging Voltage 2.25-2.30V/Cell 60 40 5 hrs. 20 0 1 2 Years 3 4 Life Characteristics in Cyclic Use Retention Capacity (%) 120 2 80 5 Discharge Depth 50% Discharge Depth 30% 4.80V 4.50V 10 Discharge Depth 100% 5.10V 30 100 60 Final Voltage 5.25V 1 min. 0 Discharge Time Retention Capacity (%) Ambient Temperature 20 C (68 F) 100 o 4.05V 0.065 0.13 0.26 0.65 1.3 3.6 Discharge Current (A) 40 1. Discharge Current 0.2C (Final Voltage 1.7V/Cell) 2. Charge Current: 0.1C 3. Ambient Temperature: 20oC to 25oC (68oF to 77oF) 20 0 o 40 C (104 F) o o 20 C (68 F) o o 0 C (32 F) 200 400 600 800 Number of Cycles 1000 1200 0.94 (24) 0 Physical Dimensions: in. (mm) CHARGING Cycle Applications: Limit initial current to 260 mA. Charge until battery voltage (under charge) reaches 7.20 to 7.35 volts at 68oF (20oC). Hold at 7.20 to 7.35 volts until current drops to approximately 13 mA. Battery is fully charged under these conditions, and charger should either be disconnected or switched to “float” voltage. “Float” or “Stand-By” Service: Hold battery across constant voltage source of 6.75 to 6.90 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. NOTE: Due to the self-discharge characteristics of this type of battery, it is imperative that they be charged after 6-9 months of storage, otherwise permanent loss of capacity might occur as a result of sulfation. SALES & MARKETING 3106 Spring Street Redwood City, CA 94063 USA Tel: 650-364-5001 Fax: 650-366-3662 [email protected] PRINTED IN U.S.A. 2.19 (56) 2.00 (51) 3.82 (97) Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. ISO9002 FM39170 www.power-sonic.com CUSTOMER SERVICE 9163 Siempre Viva Road San Diego, CA 92154 USA Tel: 619-661-2030 Fax: 619-661-3648 [email protected] MAS017 REV 2.1 (effective 6/25/01) 6/01 1.5M