Preview only show first 10 pages with watermark. For full document please download

Ps-62000 6 Volt 210.0 Ah - Power

   EMBED


Share

Transcript

PS-62000 6 Volt 210.0 AH Features • Absorbent Glass Mat (AGM) technology for superior performance • Valve regulated, spill proof construction allows safe operation in any position • Power/volume ratio yielding unrivaled energy density • Rugged impact resistant ABS case and cover (UL94-HB) • Approved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified • U.L. recognized under file number MH 20845 Terminals Performance Specifications (mm) Nominal Voltage ...........................................................................6 volts (3 cells) 20mm Nominal Capacity M6 • T8: Threaded copper insert terminals with mating M6 bolt 6mm Physical Dimensions: in (mm) 20-hr. (10.5A to 5.25 volts) .......................................................... 210.0 AH 10-hr. (20A to 5.25 volts) ............................................................. 200.0 AH 5-hr. (36A to 5.10 volts) .............................................................. 180.0 AH 3-hr. (56A to 4.50 volts) ............................................................... 168.0 AH 1-hr. (134A to 4.50 volts) ........................................................... 134.0 AH Approximate Weight ........................................................ 63.93 lbs. (29.0 kg) Energy Density (20-hr. rate) .............................. 1.82 W-h/in3 (110.93 W-h/l) Specific Energy (20-hr. rate) .............................. 19.71 W-h/lb (43.45 W-h/kg) W Internal Resistance (approx.) ........................................................ 2 milliohms Max Discharge Current (7 Min.) ................................................ 630 amperes Max Short-Duration Discharge Current (10 Sec.) ................. 2100 amperes Shelf Life (% of nominal capacity at 68°F (20°C)) 1 Month ...................................................................................................... 97% Sealed Rechargeable Battery HT H MODEL PS-62000 6 Volt 210.0 Amp. Hr. TTE RY www.power-sonic.com BA MH20845 ST B E R MU Pb YCL ED EC ® 3 Months ..................................................................................................... 91% 6 Months .................................................................................................... 83% Operating Temperature Range NONSPILLABLE L Charge .. ........................................................... -4°F (-20°C) to 122°F (50°C) Discharge ....................................................... -40°F (-40°C) to 140°F (60°C) L: 12.05 (306) W: 6.65 (169) H: 8.65 (220) HT: 8.96 (228) Case ...................................................................................................... ABS Plastic Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. Power-Sonic Chargers ......................................................................PSC-64000 To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. All data subject to change without notice. www.power-sonic.com PS-62000 6 Volt 210.0 AH ® Discharge Characteristics 100 Charging is not necessary unless 100% of capacity is required. 80 Charging before use is necessary to help recover full capacity. 5oC (41oF) 60 o 30 C o (86 F) 40oC (104oF) 40 0 7.0 0 2 4 6 8 10 Charge may fail to restore full capacity. Do not let batteries reach this state. 20oC (68oF) 12 14 16 18 20 o 6.0 5.5 5.0 4.5 2.4 6 12 24 36 48 1 2 Discharge Time 4 6 8 10 20 4 0 h Life Characteristics in Stand-By Use 5 Retention Capacity (%) h 210 min 20 15 10 Discharge Time 10.5 420 1.2 Discharge Time vs. Discharge Current 21 42 105 Final Voltage 4.0 Standing Period (Months) o Ambient Temperature 20 C (68 F) 6.5 Terminal Voltage (V) Capacity Retention Ratio (%) Shelf Life & Storage Final Voltage 5.25V 2 5.10V 1 4.80V min 30 4.50V 10 5 o 4.05V 10.5 21 42 105 210 80 60 20 0 o Note: Due to the self-discharge characteristics of this type of battery, it is imperative that they be charged within 6 months of storage, otherwise permanent loss of capacity might occur as a result of sulfation. Chargers 1 2 3 4 Life Characteristics in Cyclic Use 120 Retention Capacity (%) Discharge Current (A) “Float” or “Stand-By” Service: Hold battery across constant voltage source of 6.75 to 6.90 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. 0 Years 420 Cycle Applications: Limit initial current to 30A. Charge until battery voltage (under charge) reaches 7.20 to 7.35 volts at 68°F (20°C). Hold at 7.20 to 7.35 volts until current drops to under 2.1A. Battery is fully charged under these conditions, and charger should be disconnected or switched to “float” voltage. Float Charging Voltage 2.25 - 2.30 V/Cell 40 40 C (104 F) o o 20 C (68 F) o o 0 C (32 F) Charging Ambient Temperature 20˚C (68˚F) 100 100 80 60 Discharge Depth 100% Discharge Depth 50% Discharge Depth 30% 40 1. Discharge Current 0.2C (Final Voltage 1.7V/Cell) 2. Charge Current: 0.1C 3. Ambient Temperature: 20oC to 25oC (68oF to 77oF) 20 0 0 200 400 600 800 1000 1200 Number of Cycles Further Information Power-Sonic offers a wide range of chargers suitable for batteries up to 100AH. Please refer to the Charger Selection Guide in our specification sheets for “C-Series Switch Mode Chargers” and “Transformer Type A and F Series”. Please contact our Technical department for advice if you have difficulty in locating suitable models. Please refer to our website www.power-sonic.com for a complete range of useful downloads, such as product catalogs, material safety data sheets (MSDS), ISO certification, etc.. Contact Information DOMESTIC SALES Tel: +1-619-661-2020 Fax: +1-619-661-3650 [email protected] www.power-sonic.com CUSTOMER SERVICE Tel: +1-619-661-2030 Fax: +1-619-661-3648 [email protected] TECHNICAL SUPPORT Tel: +1-619-661-2020 Fax: +1-619-661-3648 [email protected] INTERNATIONAL SALES Tel: +1-650-364-5001 Fax: +1-650-366-3662 [email protected] CORPORATE OFFICE • 7550 Panasonic Way • San Diego, CA 92154 • USA • Tel: +1-619-661-2020 • Fax: +1-619-661-3650 © 2011. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners. 0211 1M