Transcript
8 Port PoE Switch PS1084S Manual
Product Profile PS1084S is a 8 port 10/100Mbps and 2 10/100/1000 optical composite port managed PoE Switch designed for wireless AP and network monitoring equipment.Using the most advanced PoE power supply technology solutions , including 1-8 10/100Mbps ports support IEEE802.3af / at PoE power supply technology, power distance up to 100 meters.PoE design of automatic identification technology, automatic detection complex standard powered devices;All port using professional lightning protection technology. PS1084S affordable price provides some need to simplify wireless access point (AP)and the installation of IPbased network cameras business network.These devices away from the power socket is ideal for hanging on the wall or ceiling height.PoE eliminates the hassle for these devices specially electrical outlets.Let the connecting those devices connected to AC power difficulty more flexible,and installation cost minimization.Compact and flexible design, PS1084S is an ideal choice for these who want relief for use PoE to deploy wireless access points (AP) and based IP network surveillance cameras for small business networks.
Key Features
Support IEEE802.3、IEEE 802.3u、IEEE 802.3z、IEEE 802.3ab、IEEE 802.3x、IEEE 802.1D、IEEE 802.1Q、IEEE 802.1p、IEEE 802.1x、IEEE 802.1W、SNMP、IGMP，and IEEE802.3af/at standard.
·8 port 10/100M PoE RJ45 port (Adaptive MDI/MDIX ),2 port 10/100/1000 SFP port,2 port 10/100/1000 uplink port,1-8 port support PoE.
Support MDI/MDIX.
Data and power transmission distance 100m.
Support power over ethernet cable device for example wireless AP and IP camera Automatically provide the adaptive device
Comprehensive, flexible Power over Ethernet (PoE) Power over Ethernet (PoE) to optimize the wireless access point (AP), installation and power management VoIP phones and based IP surveillance cameras.Power over Ethernet (IEEE 802.3af / at) reduce the time and cost of installation for lots of new network equipments.Use a standard CAF / AT5 cable, let your wireless AP and IP cameras freed from the constraints of the power line.If use UPS to offer power supply your switch, all your PoE devices will get uninterrupted power supply.
Single Output automatic protection, self-recovery function PS1084S PoE switch support a single output automatic protection function,when detected the single output power is more 20% than the normal output power,it will stop to offer power for this port automaticly ,In order to protect the security for remote device and other ports to work properly.After stopping power for 1-2 minutes, the device will restore power supply for this port automatically,If no power anomalies, will resume normal power supply.
Provide LED indication, more likely to judge the operating state PS1084S PoE switch provides LED indicators for each port,Can be very intuitive to observe whether each port if access or not, Equipment workload status,provide PoE power required informations to the user.
Designed for business and hot spot design PS1084S can be used in offices, factories, hospitals, schools, and also more suitable for Wi-Fi hotspot for wireless public, such as hotels, airports, ports and other places.If the building power supply system broke down, and the company no UPS systems,that office VoIP phone becomes ineffective;Company's remote monitoring devices and wireless network access point is generally placed in the relatively remote location, such as a roof, eaves and other places to the greatest coverage, and these places will not be installed power outlets.So the use of standard network cable is important, provide a centralized power supply for IP phones, cameras, wireless access points, Excluding the problems that installation power supply for these fixed places.
Specification
Network Port ·8 port 10/100M PoE RJ45 port (Adaptive MDI/MDIX ) ·2 10/100/1000M Non-POE RJ45port ·2 10/100/1000Mbps SFP port, Non-POE RJ45port and SFP port Multiplexing Manage port
No
Switching capacity
5.6Gbps
Network protocol
·IEEE802.3,10Base-T Ethernet standard ·IEEE802.3u, Fast Ethernet standard IEEE802.3ab, Gigabit Ethernet standard IEEE802.3ae, 10G Ethernet standard IEEE802.3x, full-duplex Ethernet data link layer flow control
IEEE802.3ad, Link Aggregation Protocol IEEE 802.1ab-2005, LLDP protocol IEEE 802.w, Rapid Spanning Tree Protocol IEEE 802.1q，VLANstandard IEEE 802.1p, QoS / CoS Quality of Service
MAC address
Support 4K MAC address list Support for automatic updates, two-way learning
STP
Support RSTP Rapid Spanning Tree Protocol
Port Mirroring
Support multiple port mirroring, there is no limit on the number of mirroring port
Suppression
Support for broadcast, multicast, unicast and other suppression
VLAN
Maximum support 4096 VLAN Support Port-based VLAN Support 802.1q VLAN
QoS
·SP (Strict Priority), Strict Priority Round Robin WRR (Weighted Round Robin), Weighted Round Robin Priority Head Of Line, to prevent congestion mechanism 802.1p port queue priority algorithm Best-Effort Service, best effort service Cos / Tos, QOS marking Differentiated Service, as differentiated service Random Early Detection (RED), Random Early Detection First come first served, FCFS Algorithm
System Maintenance
Configuration file upload / download Support Web Restore Factory Settings Support system log function
Physical Specifications
Dimensions (L x W x H): 285mm x 180mm x 44mm Weight: 0.8Kg
Environmental Operating temperature: 0 °~ 40 °C; Storage temperature: -40 ~ 70 °C Specificationss Humidity: 10% ~ 90%, non-condensing; storage humidity: 5% ~95%, noncondensing Input voltage
AC：110-240V/50-60Hz
Total power
120W
consumption
LED lights indicate
Indicator
Normal State
Meaning
Power indicator (PWR)
Red Light ON
PoE Switch powered
Red Light OFF
100Mbps port
Connection status LED (LINK)
Data transmission status light (ACT)
POE power supply status indicator (POE)
Green Light ON
PoE Switch off Port link establish
Green Light OFF
Ethernet link is not established
Green Light flash
Ethernet link data transmission
Green Light OFF
Ethernet link is not established
Yellow Light ON
Port offer power supply to PD port terminall normal
Yellow Light OFF
No power supply to the PD port terminal
Application Suggestion 1. In order to safety，pls non-professionals don’t open the casing of product ； 2.Pls be careful the risk of strong current and security protection when product is carrying on power； 3.Pls select the right power adaptor provide power for PoE switch，before using pls confirm whether it is accord with the requirement of PoE switch ； 4.Pls don’t use PoE switch under the humid environment，avoiding water go into the product inside caused PoE switch breakdown. 5.Pls start the power after the circuit connected； 6.Pls don’t plug-in and plug-out the connection cable when product is carrying on power； 7.Pls don’t use PoE switch under somewhere with more dust and EME; 8.Pls don’t put heavy thing on PoE switch , in order to having an accident. ； 9. Suggestion that PoE switch use for indoor，if you want to use for outdoor, pls install waterproof box
