Transcript
Data Sheet
PS13-1B N645 Designed & Manufactured
Specifications Input:
240Vac / 50Hz
Output: 13.8Vdc 1A Dimensions:
200L x 140W x 80H
Weight: 850gm approx (1.5Kg c/w Plug Pack) Plug Pack shown is not supplied with this model ( May be ordered separately )
The PS13-1B is a linear regulated power supply module designed to provide 13.8Vdc at 1A and features an on-board battery charger.
12Vdc 1A Power Module Requires Approved 16Vac 1.5A Plug Pack (Tactical Part No: 16VP/P)
PS13-1B
Tactical Technologies PS13-1B
®
PS13-1B features a powder coated steel enclosure large enough to house a 1.2 or 4Ah 12V Sealed Lead Acid battery and requires a 16Vac 1.5A plug pack (not supplied). Output is short circuit protected by a 1A M205 Fuse - if replacement is required, use only a 1A Fuse.
PS13-1B Installation Notes: • • • • • •
This power supply is designed for INDOOR use ONLY. Always select a clean, dry environment for installation. Ensure adequate free air circulation around unit to avoid over-heating. Recommended battery is either 12V / 1.2Ah or 12V / 4Ah Sealed Lead Acid If fuse requires replacement, determine cause of failure and replace only with M205 F 1A/250V. On-board Battery Charger can provide up to 90 mA - remember to consider this current when determining overall system current draw. • Battery charge current (90 mA) should be subtracted from total power supply output (1A) to allow a discharged battery to be recharged after extended AC power outage
Other Tactical Power Products: • • • • • • •
12 & 13.5Vdc Supplies - 1A, 2.5A, 5A, 10A & 20A 18Vdc Supplies - 2A & 4A 24Vdc Supplies - 3A & 6A 24Vac Supplies - 2A, 3A, 4A, 6A, 10A & 20A AC-DC, DC-DC Convertors Low Voltage Power Distribution Modules 19” Rackmount Distributed Power Products
Other Tactical Security Products: • • • • •
Cyturion Protector (GSM Back-up) Cyturion Pro-Data (GSM Back-up & Panel Download) Buffered & Un-buffered Relay Boards Digital Timers Powder coated steel metalwork
Designed & Manufactured
