Transcript
User’s Manual
PSBM60I
240W Watt Amplified Five Speaker iPod Sound System W/FM Radio and Wireless Remote iPhone Docking System
www.pyleaudio.com
KNOW THESE SAFETY SYMBOLS
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This “bolt of lightning” indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The “exclamation point” calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
WARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or moisture and objects filled with liquids, such as vases, should notbe placed on this apparatus.
Important Safety Instructions 1.Read these instructions. 2.Keep these instructions. 3.Heed all warnings. 4.Follow all instructions. 5.Do not use this apparatus near water. 6.Clean only with dry cloth. 7.Do not block any ventilation openings.Install in accordance with the manufacturer’s instructions. 8.Do not install near any heat sources such as radiators, heat registers, stoves,or other apparatus (including amplifiers)that produce heat. 9.Protect the power cord from beingwalked on or pinched, particularly atplugs, convenience receptacles, and the point where they exit from the apparatus. 10.Only use attachments/accessories specified by the manufacturer. 11.Use only with the cart, stand, tripod,bracket, or table specified by the manufacturer or sold with the apparatus.When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 12.Unplug this apparatus during lightningstorms or when unused for long periods of time.
13.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in anyway, such as power-supply cord or plugis damaged, liquid has been spilled orobjects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally,or has been dropped. 14.Battery usage CAUTION – To prevent battery leakage which may result inbodily injury, property damage, or damage to the apparatus: œInstall all batteries correctly, + and -as marked on the apparatus. œDo not mix batteries (old and new or carbon and alkaline, etc). œRemove batteries when the unit is not used for a long time. œBatteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. 15.Apparatus shall not be exposed to dripping or splashing. 16.Do not place any sources of danger on the apparatus (e.g. liquid filled objects,lighted candles). 17.Where the MAINS plug or an appliance coupler is used as the disconnect device,the disconnect device shall remain readily operable.
Hearing safety Listen at a moderate volume. ● Sound can be deceiving. Over time your hearing ‘comfort level’ adapts to higher volumes of sound. So after prolonged listening, what sounds ‘normal’ can actually be loud and harmful to your hearing. To guard against this,set your volume to a safe level before your hearing adapts and leave it there.
To establish a safe volume level: ● Set your volume control at a low setting. ● Slowly increase the sound until you can hear it comfortably and clearly, without distortion.
Listen for reasonable periods of time: ● Prolonged exposure to sound, evenat normally ‘safe’ levels, can also cause hearing loss. ● Be sure to use your equipment reasonably and take appropriate breaks.
Warning ● Never remove the casing of this apparatus. ● Never lubricate any part of this apparatus. ● Never place this apparatus on other electrical equipment. ● Keep this apparatus away from direct sunlight, naked flames or heat. ● Ensure that you always have easy access to the power cord, plug or adaptor to disconnect the apparatus from the power.
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively,and has been certified by the developer to meet Apple performance standards. Apple is not responsible for he operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance. iPad, iPhone, iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
Compatible iPod/iPhone/iPad ● iPod touch (4th generation) ● iPod touch (3rd generation) ● iPod touch (2nd generation) ● iPod touch (1st generation) ● iPod classic ● iPod with video ● iPod nano(6th generation) ● iPod nano (5th generation) ● iPod nano (4th generation)
● iPod nano (3rd generation) ● iPod nano (2nd generation) ● iPod nano (1st generation) ● iPhone 4 ● iPhone 3GS ● iPhone 3G ● iPhone ● iPad ● iPad 2
Break-in Break-in refers to the aging period for the speakers to where they perform best acoustically. Upon purchase the speakers are not broken-in. A period ranging from 48-100 hours of usage is recommended before both the main unit and the subwoofer behave optimally. Break-in can be realized at the same time of normal music listening as the course you listen to music with the medium volume itself is a course of break-in of the speakers. With time on, the break-in course may come to its end about one month later if you listen to music with the speakers for two to three hours each day. Please mainly use symphonic music or pop music for the break-in as the frequency range of these two kinds of music is wide, and can therefore realize good break-in for each frequency range of the speakers. Never make the volume too large during the break-in or else the speakers will be quite easy to get damaged due to long-time overloading run and disturb your families and neighbors.
Features ◆ Entire wooden case, piano style painted front panel with blue backlight LCD display. ◆ FM stereo radio with automatic search and can store 20 station. ◆ iPod docking station suitable for most iPod/iPhone/iPad models. ◆ iPod charging function and can output iPod video to TV. ◆ INPUT, MUTE, STANDBY, VOL + and VOL - buttons. ◆ CD, AUX1, AUX2, PC/MP3 inputs. ◆ 1x 5.25" woofer, 2x3" full range speaker and 2x1" tweeter. ◆ With remote control.
ACCESSORIES Stand for iPad
Remote Control
AAA Batteries
3.5mm mini plug connection cable
3 RCA cable
Owner`s Manual Owner`s Manu al
FRONT PANEL FUNCTIONS
6
7
1. STANDBY: Press to turn on the unit from standby mode. Press again to turn the unit off(standby). 2. INPUT: Press repeatedly to select the input source as desire. 3. MUTE : Press to turn off the sound temporary. Press again to turn the sound back. 4. VOL-: Press to reduce the sound level. 5. VOL+: Press to increase the sound level. 6. LCD display. 7. Remote Sensor. 8. Power indicator.
8 3
2 1
4
5
TOP PANEL FUNCTIONS
1
2
1. 3.5mm audio jack 2. Dock for iPod/iPhone/iPad
BACK PANEL FUNCTIONS 1
7
1.Power ON/OFF Switch. 2.CD L+R Input jacks. 3.AUX 1 L+R input jacks. 4.AUX 2 L+R input jacks. 5.Video input jack. 6.FM ANT(Antenna). 7.AC Power Cord.
2
3
4
5
6
SYSTEM CONNECTIONS 1. CONNECT POWER SUPPLY Insert the power plug into a wall socket. Make sure the voltage marked at the rear panel is same as your AC power. Do not operate with wet hands to avoid electric shock.
Socket
Power plug
2. CONNECT WITH iPad
1. Plug the stand for iPad into the holes.
2. Make sure the home button on iPad is directed at the middle of the dock.
3. CONNECT WITH PC/MP3 To listen the sound source from PC (Computer) or MP3 Players, connect the unit with the external device as below:
3.5mm mini plug connection cable
PC
MP3
4. CONNECT WITH TV/DVD To listen the sound source from Television and/or DVD players, connect the unit with the external device as below:
TV Video In
TV Audio Out L R
TV
Audio In
DVD Audio Out
DVD
Video Out
REMOTE CONTROL FUNCTION
STAND-BY
CH+
MUTE
TUNE-
M
TUNE+
MENU
RANDOM
REPEAT / ST SOURCE
BASS
VOL
13
1. STANDBY Button
7. RANDOM Button
2.
8. MENU Button
/
(CH+/CH-) Button
3. MUTE Button
9. REPEAT/ST (Stereo) Button
4.
/TUNE - Button
10. SOURCE Button
5.
/ M (Play/Pause/Memory) Button
11.
6.
/TUNE + Button
12. BASS +/- Buttons
Enter Button
13. VOL (Volume) +/- Buttons
BATTERIES INSTALLATION (REMOTE CONTROL) 1. Slide and lift the battery door as figure 1 below. 2. Install 2 (two) AAA size batteries (included) into the battery compartment as the polarity markings inside as figure 2 below. 3. Replace the battery door as figure 3 below.
Ie OJ!:: 2
t
3
BATTERY PRECAUTIONS: Follow these precautions when using a battery in this device:
1. Use only the size and type of battery specified. 2. Be sure to follow the correct polarity when installing the battery as indicated in the battery
oompartment. A reversed battery may cause damage Ie the device. 3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries
with fresh ones. 4. If the batteries in the device are consumed or the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from possible battery leakage. 5. Do not by to recharge the battery not intended to be recharged; it can overheat and rupbJre.
(FollaN battery manufacturer's instructions.) 6. The batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
7. Clean the battery ooniacts and also those of the device prior Ie battery inslallation
EFFCTIVE DISTANCE OF REMOTE TRANSMITTER NOTES: • When there is an obstacle between the unit and •
co;:__--:-~:__-...
the tJansmitter, the transmitter may not operate. When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the REMOTE SENSOR of the unit, the remote operation may be unstable.
