Transcript
Public Address
PAW – 7000AS50W
Pandora Series Features
Description:
Loudspeaker type
Two way
Cabinet material
Plastic
Clients who demand the most from their outdoor Powder coated aluminium Grille material sound system will certainly be impressed by the new Mica polypropylene. cone Cone type set of waterproof cabinet speaker. All units within Thermoplastic polyurethane Surround type the series feature a two-way arrangement for a dynamic response. Equipped with a superior 5.25” White Colour woofer and an ethereal 1” tweeter, PAW–7000AS Stainless steel U-bracket Bracket type with a low insertion loss 10/20/30/40/50W Screw-in Fitting Mechanism transformer for P.A. purposes. PAW–7000AS also Qualification IP 65 offers a stunning acoustic performance with ASTM D4329 & ASTM D2244 capability of managing up a maximum power of 100 (600 hrs UV stabilised) watts. ASTM B117 (400hrs saltwater spray) Each model has a 8 Ω low impedance design, RoHS conform making it suitable to be fitted in Hi-Fi system and to IEC-268-5 (100 hours tested) serve discrete applications including open-air café, attraction park, lounge, cruise ship, swimming pool, garden and school. Integrated with special waterproof terminal cover and a stainless U-bracket, the water resistance and moisture tolerance have been amplified significantly to a new level, rated IP 65, to withstand different outdoor environments. This series will grant satisfaction to clients, who are looking for intelligible, attractive and supportive outdoor loudspeaker. Specification
Model Loudspeaker size / type Transformer taps for 100V with corresponding impedance Average Sensitivity 1W / 1m
PAW-7000AS50W 5.25”woofer / 1”tweeter 10/20/30/40/50W/8 Ω 1k / 500 / 333 / 250 / 200 Ω 85 ± 2 dB
Maximum SPL 1W
102 ± 2 dB / 50W
Frequency response
55 Hz ~ 20 kHz
Operating temperature
-20℃ ~ 100℃
Power Selection Method
Rotary selector
Bracket type Exterior dimensions Weight
U-bracket 157(W)×267(L)×178(D) 2300g
PAW – 7000AS50W / PAB – 7000AS50W Dimensional Diagram :
Wiring Diagram :
Characteristic diagrams :
Public Address Pandora Series
PAW – 7000 AS50W
Installation Manual
IMPORTANT : Please read the following instructions carefully before attempting the installation, as it contains important information that will guide you to achieve the optimum performance with the unit. It is highly recommended for users to keep this manual for future reference.
WARNING : To ensure a firm fitting of the unit, this product must be tightly screwed against the mounting surface. The knobs must be turned tightly to secure the position of the speaker. Failure to meet these precautions may result in insecure fitting of the product and detachment from the ceiling as a consequence, which can cause serious personal injury and/or property damage.
WARNING : During operation there is a hazard of contact voltage up to 100V / 70 V at the electrical cable. The installation must only be made by authorised skilled personnel. Observe the correct power matching. An incorrect power matching will destroy the PA amplifier if the total power exceeds the amplifier power.
CAUTION : Do not operate the product for a prolong period of time with the sound distorted. It is an indication of malfunction, which in turn may generate heat and start a fire.
Installation Guide:
PAW – 7000AS50W
Step 1 : Press the U-bracket firmly against the mounting surface. Tighten the screws by turning them clockwise. See Figure-I.
Step 2 : Line up the U-bracket and the speaker and turn the knob above clockwise first before turning the knob below. DO NOT tighten
the
knobs
completely.
See
Figure-II.
Step 3 : Remove the terminal cover. Insert the wire through the centre hole of the cover and connect it to the terminal block. See Figure-III.
Step 4 : Replace the terminal cover behind the speaker. Select the right wattage using a screwdriver. See Figure-IV.
Step 5 : Adjust the angle of the speaker to achieve
the
most
efficient
broadcasting effect. See Figure-V or Figure-VI. Tighten the knobs to ensure a firm fitting.
