Transcript
[sche2] 551 Inglese - 1 (PULICOL) (09.06.99 - 2ª Bozza/Pell.)
551/6.99
PULICOL
®
GEL SOLVENT FOR REMOVING ADHESIVES AND PAINT
• Do not use PULICOL on baking paint because it would have little effect.
APPLICATION Trowel or brush PULICOL on the adhesive or paint residue to be removed; wait until the residue softens or dissolves, them remove it with a flat-edged trowel. If the surface is smooth and nonabsorbent, e.g. marble or ceramic tile, wash it with a solution of caustic soda and rinse thoroughly with water. If the surface is rough and/or absorbent, e.g. cementitious screeds or scratch coats, remove the residue with sandpaper or a wire brush. Do not wash wood surfaces, sandpaper them only. The amount of time PULICOL should be left on before removing it depends on the type of adhesive and its thickness, for example: ADESILEX F57
requires a few minutes
ADESILEX V4
requires a few minutes
ADESILEX G19 requires approx. 30 minutes ADESILEX G12 requires approx. 45–60 minutes
COVERAGE WHERE TO USE
TECHNICAL CHARACTERISTICS
For removing old natural and synthetic resin-based adhesives and paint.
PULICOL is composed of a mixture of solvents in the form of a gel that is easy to trowel or brush on.
Typical applications
PULICOL is highly effective in dissolving all resin-based adhesives and paints only a few minutes after application.
• Removing old adhesive from floors in marble, ceramic tile, wood, concrete, cementitious levelling coats, gypsum, metal, etc. • Removing old adhesive from coverings in ceramic and mosaic tile, marble, concrete, wood, gypsum, metal, fibrous concrete, etc. • Removing paint from surfaces in metal, wood, concrete, etc.
RECOMMENDATIONS • Do not mix PULICOL with water. • Do not use on substrates that can be damaged by solvents, e.g. certain plastics, rubber, PVC, surfaces treated with decorative enamel that is not resistant to solvents, or on varnished wood floors.
®
Coverage depends on the amount and type of adhesive: as a general rule, coverage is 300 g/m2.
WARNING PULICOL does not require labelling as an inflammable product. The gel prevents solvents from evaporating rapidly and therefore it does not have a very offensive odour. However the usual precautions should be taken that are advisable when working with chemical products, particularly solvents. PULICOL is harmful.
PACKAGING 6- and 1-kg drums.
[sche2] 551 Inglese - 2 (PULICOL) (09.06.99 - 2ª Bozza/Pell.)
WARNING N.B. Although the technical details and recommendations contained in this report correspond to the best of our knowledge and experience, all the above information must, in every case be taken as merely indicative and subject to confirmation after long-term practical applications; for this reason, anyone who intends to use the product must ensure beforehand that it is suitable for the envisaged application. In every case, the user alone is fully responsible for any consequences deriving from the use of the product.
A
P
E
I
Q
U
A
L
transparent gel
Colour:
colourless
Density:
1.19
Storage:
12 months in original packaging
Health hazard EEC 88/379:
yes: irritates skin and eyes
Inflammability:
yes
Customs class:
3814 00 90
APPLICATION DATA: Waiting time before removal:
N.B. FOR PROFESSIONAL USE ONLY
M
PRODUCT IDENTIFICATION Consistency:
I
15 to 60 minutes depending on the type of adhesive
Application temperature:
from +8°C to +35°C
Coverage:
= 300 g/m 2
T
Y
S
Y
S
(GB) A.G. BETA
TECHNICAL DATA
T
E
M
® CERTIQUALITY No. 250/1
MAPEI - ITALIA
CERTIQUALITY No. 1517
QMI No. 004157
DET NORSKE VERITAS
MAPEI - FRANCE
MAPEI INC - CANADA
MAPEI KTF. - HUNGARY
BUILDING THE FUTURE
