Transcript
Push Button Electronic Shower 860T and 861T Specification: (example) • • • • • • • •
Push button electronic shower system Hardwire – 24 VAC to 6 VDC or Battery – 4AA 6 VDC Stainless steel cover with S/S vandal resistant mounting screws Metal mounting box Field adjustable shower time Slow closing solenoid valve Integral stop Tempered water supplied to solenoid valve (except control box options No. 3 and 6) and... with... (add shower required) with... (add control/sensor box required) with... (transformer - specify separately - See Back Page)
DESCRIPTION Electronic Shower Hardwire Electronic Shower Battery
860T167 Engineer/Architect Approval Model Specified: Approval:
Date:
PRODUCT NO. 860T1 861T1
SENSOR
SHOWER
✔
✔
✔
Specify “0” when no shower required.
0
0
0
1
1
1
2
2
2
3
3
4
4
Touch-Clean Showerhead, Arm & Flange 2.5 USGPM (9.5 L/min)
3
Recessed Mount with 8" Box* SEE Specification Drawing #20
4
5
5
Handshower, 610mm (24") Combination S/S Slide/Grab Bar 2.5 USGPM (9.5 L/min)
6
6
30° Vandal Resistant, Cast Flow Control Wallmount Showerhead 2.0 USGPM (7.6 L/min)
7
7
7
Recessed Mount with 10" Box and Pressure Balance Mixing Valve SEE Specification Drawing #22
8
8
8
Recessed Mount with 10" Box and Thermostatic Mixing Valve. SEE Specification Drawing #23
9
9
9
* Mixing Valve supplied by others. Refer to www.specselect.com for individual models.
5 6
Components only UNASSEMBLED 4" Box* SEE Specification Drawing #21
Flowrates are at 80 PSI. Note: Use this page front and back, with specification drawing page referenced above, as product submittal sheets.
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
Page 5.C.3.1
Push Button Electronic Shower 860T and 861T Approvals: • ASME A112.18.1 / CSA B125.1 • Indicates ADA compliance to ICC / ANSI A117.1/ADA. • IAPMO listed • CSA certified • Control/Sensor Box Option 7, Pressure Balancing Valve, meets ASSE 1016 • Control/Sensor Box Option 8 Thermostatic Mixing Valve, CSA certified and meets ASSE 1016 and 1017 (Contact Delta Representative for State and/or Local Approvals.)
860T167 Typical Installation
305mm (12")
257mm (10-1/8")
305mm (12")
Stainless Steel Cover Plate
FLOWRATE vs PRESSURE FLOW (l/min.)
FLOW (USGPM)
Outlet Flow rates
3.5
13
254mm (10") Control Box
12
3
11 10
2.5
9 8
2
30° Institutional Shower Head
7 6
1.5
5 4 3
1
2
.5
1 0
102mm (4") Outlet 3/8" M.I.P.
0 0
10
20
30
40
50
60
70
Stainless Steel Cover Plate
2007mm (79")*
Stainless Steel Push Button
35mm (1-3/8")
80
Line Pressure (psig) of Push Button
Shower Outlets No. 3 No. 5
1320mm (52")*
No. 6 254x257x102mm (10"x10-1/8"x4") Control Box
OPERATION: • Shower flows when push button is activated. • Adjustable maximum continuous run time 10 minutes. • Factory set to 3 minutes.
1218mm (48")* * NOTE: Recommended Mounting Height
NOTE: For optimum performance of this product,we recommend a system pressure between 20 and 80 PSI static. This product will operate up to a maximum of 125 PSI static per ANSI and CSA requirements. However, we do not recommend pressures above 80 PSI. Thermal expansion or leaking pressure reducing valves may require use of expansion tanks or relief valves to ensure your system never exceeds its maximum intended pressure setting.
PRODUCT SUPPLIED AS SHOWN BY SOLID LINES. ALL ITEMS SHOWN BY DOTTED LINES SUPPLIED BY OTHERS.
FINISHED FLOOR
860T & 861T ELECTRONIC SHOWER OPTIONAL ACCESSORIES:
✔ ✔
TRANSFORMERS: 060704A 110 to 24VAC Class II 20VA (Up to 5 Electronic Valves) 060771A 110 to 24VAC Class II 40VA (Up to 10 Electronic Valves) 060772A 110 to 24VAC Class II 100VA (Up to 25 Electronic Valves) CORDS: 060901A 12" Solenoid Extension Cord 060902A 36" Solenoid Extension Cord
Refer to www.specselect.com for individual models. Product supplied as shown by solid lines. All items shown by dotted lines supplied by others.
DSP–860T
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
Specification Drawing #20 TEMPERED WATER – ASSEMBLED CONTROL BOX 860T AND 861T SERIES
✔
PRODUCT NO. 860T1 861T1
3 3
VALVE TYPE
MOUNT TYPE
COVER
Push Button Shower Valve – Hardwire Push Button Shower Valve – Battery
Recessed Mount Recessed Mount
254mm (10") Stainless Steel 254mm (10") Stainless Steel
860T and 861T SERIES
(203mm) 8"
102mm (4")
25mm (1")
102mm (4") 860T Driver Board
Outlet 3/8" M.I.P.
10" Stainless Steel Cover Plate
Aluminum Control Box 206mm (8-1/8") Stainless Steel Push Button Slow Closing Solenoid Valve
Screwdriver Stop
Inlet – 1/2" Copper Tempered Water (By Others) Battery Pack (not shown). Required for battery models only.
Note: Measurements may vary ± 6mm (0.25'') Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
Page 5.C.18.1
Specification Drawing #21 COMPONENTS ONLY UNASSEMBLED 860T AND 861T SERIES
✔
PRODUCT NO. 860T1 861T1
6 6
VALVE TYPE
MOUNT TYPE
COVER
Push Button Shower Valve – Hardwire Push Button Shower Valve – Battery
Recessed Mount Recessed Mount
124mm (4-7/8") Stainless Steel 124mm (4-7/8") Stainless Steel
860T AND 861T SERIES
124mm (4-7/8") 55mm (2-5/32")
Plaster Guard
124mm (4-7/8")
102mm (4")
Stainless Steel Push Button
Stainless Steel Cover Plate
Standard Electrical Box 102x102mm ( 4" x 4")
Battery Pack (not shown). Required for battery models only.
Inlet 1/2" M.I.P./ 1/2" copper sweat
Outlet 3/8" F.I.P.
Slow closing Screwdriver solenoid valve AND stop
Tempered Water (By Others)
Note: Measurements may vary ± 6mm (0.25'')
DSP–860TA
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
Specification Drawing #22 PRESSURE BALANCING MIXING VALVE ASSEMBLED CONTROL BOX 860T AND 861T SERIES
✔
PRODUCT NO. 860T1 861T1
7 7
VALVE TYPE
MOUNT TYPE
COVER
Push Button Shower Valve – Hardwire Push Button Shower Valve – Battery
Recessed Mount Recessed Mount
305mm (12") Stainless Steel 305mm (12") Stainless Steel
860T and 861T SERIES
254mm (10")
102mm (4") 35mm (1-3/8")
127mm (5") 860T Driver Board
Outlet 3/8" M.I.P. 305mm (12") Stainless Steel Cover Plate Slow Closing Solenoid Valve Stainless Steel Push Button Pressure Balance Valve
257mm (10-1/8") Cold Water Inlet
Hot Water Inlet
73mm (2-7/8")
Inlet – 1/2" Copper
Aluminum Control Box
1/2" MIP / 1/2" Copper Sweat Screwdriver Stop
PIPING SHOWN WITH DOTTED LINES SUPPLIED BY OTHERS.
Battery Pack (not shown). Required for battery models only.
Note: Measurements may vary ± 6mm (0.25'') Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
Page 5.C.18.2
Specification Drawing #23 THERMOSTATIC BALANCING MIXING VALVE ASSEMBLED CONTROL BOX 860T AND 861T SERIES
✔
PRODUCT NO. 860T1 861T1
8 8
VALVE TYPE
MOUNT TYPE
COVER
Push Button Shower Valve – Hardwire Push Button Shower Valve – Battery
Recessed Mount Recessed Mount
305mm (12") Stainless Steel 305mm (12") Stainless Steel
860T AND 861T SERIES
102mm (4") 28mm (1.1")
74mm (2.9")
Outlet 3/8" M.I.P.
74mm (2.9")
Inlets 1/2" Copper
860T Driver Boar
Slow Closing Solenoid Valve 305mm (12") Stainless Steel Cover Plate
Bracket and battery holder not required for hardwire models 257mm (10.13") Stainless Steel Push Button
Aluminum Control Box Screwdriver Stop
Thermostatic Mixing Valve with Checks
Note: Measurements may vary ± 6mm (0.25'')
DSP–860TB
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or www.specselect.com for finish options and product availability.
