Push Button Universal Dimmer - Pdl : Electronic And Electrical

Transcript

Product profile Push Button Universal Dimmer Names Schneider Electric Name PDL654PBMWH Push Button Universal Dimmer Module 350W White PDL654PBMBK Push Button Universal Dimmer Module 350W Black PDL654PBWH Push Button Universal Dimmer 350W White About this product The PDL Push Button Universal Dimmer is an Integrally Switched, Push Button (ISPB), universal dimmer mechanism rated at 350W. Designed for universal load compatibility, the unit utilises powerful and sophisticated dimming technology to provide full control of almost any type of load. Technical Characteristics Nominal Operating Voltage 220 - 240V a.c. Nominal Operating Frequency 50Hz Compatible Loads: Incandescent light Halogen 240V lamps Low Voltage lighting with electronic transformers Low voltage lighting with iron-core transformers Low Voltage Lighting with Electronic Transformers Dimmable Compact Fluorescent Lamps (selected makes/models only, 150W Max) Dimmable LED Lighting (selected makes/models only, 150W Max) Small Motor Loads Dimming Technique Leading Edge / Trailing Edge Phase Control (dynamically auto-selected) Maximum Load 350W Derate for multi-gang applications Minimum Load 10W Key Users > > Electricians End users > Contractors > Small commercial Typical Applications > Residential Key Features – Benefits – Advantages Feature Benefits Able to Control and Dim Compact Fluorescent lights (CFL) Utilising patented universal Dimming Technology, The Push Button Dimmer incorporates a “Kick-Start” feature, intended to ignite the lamp and overcome CFL lamp strike limitations commonly experienced with traditional dimmers. No switch required to isolate the dimmer , reduction of switch's, plus less clutter on the switch plate Kick start operation to ensure lamp ignites Suitable for new installations or retro-fit applications Full short circuit protection (!) Integrated switch push button (ISPB) Compatible with Dimmable CFL Loads Wall or architrave mounting options Inbuilt Over-Current and Over-Temperature protection Immune to high frequency (ripple) signal injection on mains supply Fitted with suppressors to minimise radio frequency interference Complies with Australian and International EMC Standards. FAQ > > > > > > > Question Will this dimmer control (CFL) compact fluorescent lamps > Answer > Yes as long as the CFL is a dimmable CFL Will this dimmer control LEDs lights > Yes as long as the LED light is dimmable LED. Results may very depending on the driver and load Is there a minimum load requirement Why does the light come on really bright when first turned on then dim down Where can I purchase dimmable CFL lamps from > All my CFL lamps do not come on when `turn the lights on > > > Yes the load needs to be grater than 10 watts The dimmer may be in CFL mode ? change the mode or change to a dimmable CFL Most electrical wholesalers will have these Check that all the lamps are dimmable and the same wattage Check what mode the dimmer is set in Check the load is not exceeding the max load of 150 watts