Pw9000sf Ge Profile Series 30" Warming Drawer

Transcript

23-1/2" min. PW9000SF Locate electrical outlet in adjacent cabinet 16" from left side or 42" from right side GE Profile™ Series 30" Warming Drawer Dimensions and Installation Information (in inches) Optional Accessories: ZXD30B –1/4” panel kit 23-1/4" capability. Warming A 23-1/4" Note: Custom panel will not be flush with adjacent cabinetry drawers and doors. 10-1/2" 10-1/2" 23-1/4" Undercounter Installation: A solid barrier must be installed at least 1” from the lowest point of the bottom of cooktop burner box to the10-1/2" top of the B cutout. Use any solid material such as 1/4”-thick B plywood. Allow at least 1/4” air gap between the barrier and the top of the warming drawer. See B label on top of the warming drawer for approved cooktop models. Under Oven Installation: Additional clearance between cutouts may be required. Check to be sure that oven supports above the warming drawer location do not obstruct the required interior 23-1/2” depth and 9-1/4” height. 9-1/4" 9-1/4" 24" A recommended 9-1/4" from floor 9-1/4" for under 24" countertop recommended installation 23-1/4" 10-1/2" from floor for under countertop installation B Install Install 2x4 or 2x2 2x4anti-tip or 2x2 block 9" anti-tip from floor from2x4 floor to bottom or 2x2 block 9" of block to runners bottomor solid from floor bottom of block Door handle protrudes 2-3/4” from door face. runners or solid9" 9" bottom Cabinets and drawers on adjacent 45° and 90° 2x4 or 2x2 walls should be placed to avoid interference with(Must Support runners or solid 150 lbs.) bottom2x4 or 2x2 the handle. (Must Support 150to lbs.)bottom of block runners or solid (Must Support 150 lbs.) Installation Information: Before installing, consult bottom installation instructions packed with product for ­current dimensional data. KW Rating 120V .45 Breaker Size 120V 15 Amps Dimensions (in inches) Dimensions (in inches) Dimensions (in inches) A 27" Drawer 25-1/2" (Must Support 150 lbs.) A B A 27" Drawer 26-3/4" B25-1/2" 26-3/4" A 27" Drawer 25-1/2" 26-3/4" Dimensions (in inches) 28-1/2" 30" Drawer 28-1/2" 30" Drawer 30" Drawer 28-1/2" 30" Drawer 29-3/4" 28-1/2" A B 29-3/4" B 29-3/4" 29-3/4" B 27" Drawer 25-1/2" ® For answers to your Monogram® or GE26-3/4" appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000. 30" Drawer 28-1/2" 29-3/4" Oven cutout 23-1/2" min. Oven cutout cabinet 16" from left side or 42" from right side 2x2 or 2x4 2" min. anti-tip block 2" min. 24" recommended from floor for under 24" countertop recommended from floor installation for under against rear wall 9" from floor 2x2 to or bottom 2x4 Oven 9" ofanti-tip block block Allow 5/8" cutout 2x2 or 2x4 rear 9-1/4" overlapagainst on anti-tip block Oven cutout Allow 5/8" 2" min. overlap on all sides wall 9" from 2" min. rear all sidesfloor toagainst bottom wall 9" from 9" Allow 5/8" overlap on Allow 5/8" overlap on all sides of block floor to bottom 9" 9-1/4" of block 9-1/4" all sides A countertop installation 1" min. above toekick or A adjust to oven installation height A Install 2x4 or 2x2 anti-tip block 9" Install 2x4 or 2x2 from floor anti-tip 9" to bottom of block block 9" 2x4 or 2x2 23-1/2" min. Locate electrical outlet in adjacent DrawerADimensions cabinet 16" from Locate electrical left side or 42" outlet in adjacent from right side A 9" Locate electrical outlet in adjacent 23-1/2" min. cabinet 16" from left side or 42" from right side Under Oven Installation A 1" min. toekick above toekick 1" min. above or adjustortoadjust ovento oven installation installation height height Undercounter Installation 1-1/2" Cabinet top Electrical outlet Install a solid barrierside right 7 below a cooktop Install a solidflush barrier 25" 1" Min.* 9-1/4" Install 2x4 2x2 wall 9" from rearor cabinet with 7side of floor to bottom ofoutlet block Electrical anti-tip blocktoagainst floor bottom of block cabinet 7" max. rear cabinet wallfrom 9" from 42" max. 7 Electrical out 9 floor 9 to bottom of block 1-1/2" below a cooktop 1" Min.* 36" Install a solid1"barrier Min.* below a cooktop Countertop 9-1/4" 9-1/4" height 36" Countertop height Install 2x4 or 2x2 Electrical outlet 1-1/2" right side Installagainst 2x4 or 2x2 flush withanti-tip side of block Cabinet topmax. fromcabinet 7" max. 42" Electrical outlet anti-tip block against 25" wall 9" from cabinet 7"rear max.cabinet 25" 1-1/2" Cabinet top 36" Countertop height Electrical outlet 42" max. from Electrical Electrical outlet outlet right side 42" max.with fromside of flush A A A Cabinet top Solid barrier right side 25"9 Solid barrier Solid barrier 1/4" Air gap Electrical Electrical outlet 16" max. outlet 16" max. from left side Install a solid barrier from left side 1/4" Air gap belowElectrical a cooktop Install a solid barrier below a cooktop 7 outlet 16" max. 23-1/2 min. from left" side 36" 1" Min. * Install a solid barrier 23-1/2 " min. 1/4" Air gap Countertop below a cooktop 9-1/4" 23-1/2" min. Install a solid barrier height below a cooktop flush with sid cabinet 7" m A Listed by Solid barrier Underwriters Laboratories 1/4" Air gap Specification Revised 8/14 Install a solid barrier below a cooktop PW9000SF GE Profile™ Series 30" Warming Drawer Features and Benefits • Variable temperature control - Provides a variety of temperatures • Variable humidity control - Customized warming from crisp to moist • Frameless drawer front - Offers a smooth appearance • “On” indicator light - Illuminates when warming drawer is operating • Half rack - Maximizes drawer space • Model PW9000SFSS – Stainless steel PW9000_PJ7000 Specification Revised 8/14