Preview only show first 10 pages with watermark. For full document please download

Pwj0127 - Further Installation Instructions

   EMBED

Share

Transcript

INSTRUCTIONS FOR ARUN RADIATOR INSTALLATION Note: We recommend that if you are fitting towel hangers (optional) that they are fitted prior to the installation of the radiator. NOTE: IT IS VERY IMPORTANT THAT THE HEATERS ARE INSTALLED LEVEL (WITH THE USE OF A SPIRIT LEVEL) OTHERWISE WATER CIRCULATION COULD BE AFFECTED AFTER HAVING MADE THE CORRECT DIMENSIONS AND AVAILABLE SPACES, FIX THE HEATER AS FOLLOWS: A) Drill the holes in the wall Ø 6mm and insert the plastic plugs (for solid walls) B) Fix the wall brackets keeping the holes for the fixing towards the inside of the heater using the screw and its washer available in the supplied kit C) Insert the polished covering into the wall bracket D) Unscrew two fixing screws and lift the movable bracket upwards; install the heater JIS Europe Ltd, Unit 2, Nash Lane, Scaynes Hill, West Sussex, RH17 7NJ Tel: 01444 831200, Fax: 01444 831900, Email: [email protected], Web: www.sussexrange.co.uk Pdf Supplied By http://www.plumbworld.co.uk/