Transcript
Pyrometer/Camera Processing Head (PHFx-Cx-CS) Features Processing head PHFx-Cx-CS1,2 is intended to be used with COMPACT or COMPACT-EVOLUTION Series. The processing head is connected to the diode laser using a fiber with NA 0.22. The integrated single color pyrometer is used for non-contact measuring of the work piece temperature. It is aligned in the optical path of the laser beam and has an internal digitizing unit which communicates with the PCI-card of a pyrometer PC. A software package allows controlling the laser in a closed loop. The pyrometer is a helpful tool for processes documentation and optimization. The laser head can also be equipped with an integrated on-axis CCD camera for easy process monitoring. The video signal can be displayed on any monitor with BNC connector. The OIS version offers the opportunity to use a c-mount compatible camera for process monitoring. By having a compact housing this processing head can easily be integrated into the laser process.
Device Specification Optical Parameters
Units
Fiber Connector
SMA, QBH or LLK-HP
Maximum Numerical Aperture
NA
≤0.22
Collimation Focal Length4
mm
37, 44, 58, 64
Focal Length3
mm
60
100
150
200
300
Working Distance3
mm
53
94
145
198
290
Maximum Input Power
W
≤500
Wavelength4
nm
800 - 1000
Transmission
%
≥90
Measuring Wavelength
nm
1800 - 2100
Temperature Range
°C
190 - 700
Pyrometer (Optional)
Sampling Rate (max.)
kHz
10
Sensor Size
µm
300 or 1000 (Optional)
CCD Camera (Optional) Image Sensor
”
1/3
mm²
4.8 x 3.6
Horizontal Frequency
kHz
15.625
Vertical Frequency
Hz
Image Sensor Area
Total Number of Pixels Video Signal Signal/Noise Ratio Image Size on Monitor (with 100mm Focal Length)
50 537 (h) x 597 (v)
Vpp
1.0 at 75 Ohm
dB
>45
mm²
18 x 14 9x7
Gain Control
AVR (Automatic Gain Control)
Connector Type
BNC
Envrionmental Conditions Ambient Temperature
°C
15 to 35 (Non-Condensing Conditions)
Storage Temperature
°C
5 to 50
Pyrometer/Camera Processing Head (PHFx-Cx-CS)
Mechanical Dimensions Dimensions Weight
mm3
Approx. 217 x 70 x 139
kg
2.0 to 2.5
Package Dimension
Package Includes Processing Head, industrial-PC with build-in-controller card for pyrometer, Lascon software package, monitor, keyboard and mouse. 1
CO: as shown in picture and C2: connectors opposite to beam exit. x= SMA (S), QBH (Q) or LLK-HP (H). 3 For 980nm. 4 Consult DILAS Industrial Laser Systems for other available options.
2
DILAS Industrial Laser Systems product specifications are subject to change without notice. For handling precautions, please reference the general handling instruction manual. For additional information, please contact your local sales representative or visit our website at www.DILAS-ILS.com.
DILAS Industrial Laser Systems a division of DILAS Diodenlaser GmbH Galileo-Galilei-Straße 10 55129 Mainz Germany Phone: +49 (6131) 9226 400 Fax: +49 (6131) 9226 444 Email:
[email protected] www.DILAS-ILS.com
DI-102016
