Transcript
PZS23KPE
GE Profile™ Series 23.3 Cu. Ft. Counter-Depth Side-By-Side Refrigerator
AIR CLEARANCES
OVERALL DIMENSIONS
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES) Height to top of hinge (in.) A
69-1/4
Height to top of case (in.) B
68-3/4
Case depth without door (in.) C
23-7/8
Case depth less door handle (in.) D
27-1/8
Case depth with door handle (in.) E
28-3/4
Depth with fresh food door open 90˚ (in.) F
H G
46
Width (in.) G
35-3/4
Width with door open 90˚ with door handle (in.) H
40-1/8
C
A B
D
E
1/8
Each side (in.) Top (in.)
1
Back (in.)
2
F
*Height to top of door trim (in.): 70-1/4 †Water hook-up fits in back air clearance when calculating installation depth. If installed against a wall, allow clearance of 13-15/16" on freezer side to remove bin.
OVERALL DIMENSIONS
Clearance required to remove fresh food full-size pan without disassembling is 18-5/8". Allow additional space for any necessary leveling adjustments.
Height to top of hinge (in.) A
69-1/4
Height to top of case (in.) B
68-3/4
Case depth without door (in.) C
23-7/8
Case depth less door handle (in.) D
27-1/8
Case depth with door handle (in.) E
28-3/4
Depth with fresh food door open 90˚ (in.) F Width (in.) G
AIR CLEARANCES
Width with door open 90˚ with door handle (in.) H Each side (in.)
For answers to your Monogram, GE Café Series, Top (in.) GE Profile™ Series or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Back (in.) Center® Service, 800.626.2000. ™
46 35-3/4 40-1/8
Listed by Underwriters 1/8 Laboratories
1 2
Specification Revised 12/15
PZS23KPE
GE Profile™ Series 23.3 Cu. Ft. Counter-Depth Side-By-Side Refrigerator
FOR 21 CUBIC FOOT MODELS
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES) INSTALLATION TIPS TO MAXIMIZE THE BUILT-IN LOOK - All wall/floor molding should be removed prior to installation.
Electrical
- When possible, recess both copper water line and electrical outlet. (See local codes)
8' Ceiling Electrical
Water
Water
12" Soffit
- Water recess on rear wall recommended to prevent water line damage. 48" minimum length, 1/4" diameter water line tubing recommended. 24" Cabinet
3/4" Airspace (1/2" Gap + 1/4" Wall Plates) 25" Counter Top
- Front and rear leveling legs are adjustable for the built-in look. (See owner’s manual)
3/4" Airspace (1/2" Gap + 1/4" 13" to 14" Wall Plates) Cabinet 25" Counter Top
24" Cabinet
- If optional collar trim kit is to be used or anticipated, see collar trim installation for different rough-in dimensions Trim
*The rough-in dimensions of 70" for 23 cu. ft. models and 72-1/2" for 25 cu. ft. models are minimum and measured from the finished floor to top of opening (or the underside of the overhead cabinets). For Models with Trim Kit: If frameless style cabinets are planned for above the refrigerator, you may need to consider adding a maximum of 1/4" (70-1/4") to height of opening for 23 cu. ft. models and 1/8" (72-5/8") for 25 cu. ft. models to allow for additional clearance between the cabinet doors and the top of refrigerator trim when the cabinet doors are in open position.
70"* 23 cu. ft. models 72-1/2"* 25 cu. ft. models
FOR 24 CUBIC FOOT MODELS
24-1/2" 36-1/8"
Water
24" Cabinet
3/4" Airspace (1/2" Gap + 1/4" Wall Plates)
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
Water
Electrical
Electrical
*The rough-in dimensions of 70" for 23 cu. ft. models and 72-1/2" for 25 cu. ft. models are minimum and measured from the finished floor to top of opening (or the underside of the overhead cabinets). For Models with Trim Kit: If frameless style cabinets are planned for above the refridgerator, you may 3/4" Airspace need to consider adding a maximum of 1/4" (70-1/4") height of opening (1/2" to Gap + 1/4" for 23 cu. ft. models and 1/8" (72-5/8") for 25 cu. Wall ft. models to allow additional Plates) clearance between24" cabinet doors and top of refridgerator trim when cabinet 25" 25" Cabinet doors are in open position. Counter Counter Listed by †Model PSDW3YGX is 71-3/4". Top Top Underwriters Laboratories
Specification Revised 12/15
Trim
Collar Trim In. w/ceiling
PZS23KPE
GE Profile™ Series 23.3 Cu. Ft. Counter-Depth Side-By-Side Refrigerator ROUGH-IN DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES) COLLAR TRIM INSTALLATION An enclosure is required to match up to the trim, see Typical Installation. To obtain the most integrated look, the cabinet or soffit above the refrigerator should extend out to the same depth as the side panels. The refrigerator opening must have minimum dimensions of 70" high x 36-1/8" wide x 24-1/2" deep as shown at right. If there is an overhead cabinet, allow 1" for cabinet door clearance with the top trim piece so the cabinet doors can be opened without hitting the top trim. If 1/2" side panels are used, then side trim and panel will be even. If 3/4" side panels are used, then some of the side panel will extend beyond the trim and must be finished. IMPORTANT: Before finalizing specifications for your GE Profile Counter-Depth Refrigerator, please NOTE: - A minimum of 36-1/8" is required for refrigerator installation with collar - Be sure to allow for 1/2" or 3/4" side panels in addition to the 36-1/8" minimum.
1/2" minimum
70"*
Refrigerator Case
3/4" Cabinet Side Panel 1/2" Cabinet Side Panel
Cabinet Door 1"
Magnetic Tape Door Gasket
Overhead Cabinet
Case
Refer collar trim install
Side Trim Side trim must be installed flush with the gasket contact surface on the case.
24-1/2"* 36-1/8"
Top Trim
Typical Installation Shaded areas represent front surfaces of side panels and overhead cabinet or soffit that contacts trim.
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
*The rough-in dimension of 70" is minimum and is measured from the finished floor to top of opening (or the underside of the overhead cabinets). For Models with Trim Kit: If frameless style cabinets are planned for above the refrigerator, you may need to consider adding a maximum of 1/4" (70-1/4") to height of opening to allow additional clearance between cabinet doors and top of refrigerator trim when cabinet doors are in open position.
Listed by Underwriters Laboratories
Specification Revised 12/15
PZS23KPE
GE Profile™ Series 23.3 Cu. Ft. Counter-Depth Side-By-Side Refrigerator DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES) ORDER YOUR OWN CUSTOM WOOD PANELS TO MATCH CABINETRY OR OTHER DECOR. Panels up to 1/4" thick will fit door frame with no special preparation. Add filler behind material thinner than 1/4" for proper fit. WEIGHT LIMITS: Total weight of panels (i.e., both freezer panels)—Fresh Food = 38 lbs., Freezer = 28 lbs.
FREEZER PANEL WITHOUT Freezer Panel DISPENSER Without Dispenser Cut out
1/8
INSTALLATION OF WATER OUTLETS
Panel
1/2" 1/8
1/8
Alternate water line location 1/2" 5/16 through floor 14-15/32 Alternate water 17-7/8 line hook-up location Water floor onthrough the refrigerator
NOTE: Panels up to 3/4” will require special routing area around handles. Dimensions may vary depending on depth of panel.
1/2"
Cut out
Alternate water 1/2"location line through floor Alternate water line location Top View through floor
5/16
67-9/32 Top View
67-9/32
Top View
Water hook-up on the refrigerator
FRONT
- A minimum of 36-1/8" is required for refrigerator installation with collar
With Dispenser Cut out
5/16
IMPORTANT: Before finalizing specifications for your GE Profile Counter-Depth Refrigerator, please NOTE:
FREEZER PANEL FRESH FOOD WITH DISPENSER Fresh PANEL Freezer Panel Food
14-15/32
- Be sure to allow for 1/2" or 3/4" side panels in addition to the 36-1/8" minimum.
Water hook-up Top View on the refrigerator Recommended FRONT FRONT single loop of 1/4" copper water line 14-15/32 19-15/32 Water hook-up on the refrigerator Recommended 33-5/8 Allow 48" minimum water single loop 1/4" water line 24" ofline to copper enable refrigerator to be pulled forward
DETAIL C
18" Panels 1/4" thick or less
1/8"
5/16"
Allow 48" minimum water 24" line to enable refrigerator to be pulled forward Recommended water line location using recess in rear wall
Recommended single loop of 1/4" copper water line
Recommended single loop Allow 48" minimum water of 1/4" copper 24" water line line to enable refrigerator to be pulled forward
Water hook-up on the refrigerator
Allow 48" minimum water line to enable refrigerator 24" 18" to be pulled water forward Recommended line location using recess in rear wall
Rear Wall 18" View 1/4" Max.
Water hook-up on the refrigerator
Rear Wall View 18"
Recommended water line location using recess in rear wall
Rear Wall View
Recommended water line location using recess in rear wall Rear Wall View
(FRESH FOOD PANEL SHOWN) NOTCH REQUIRED AT TOP CORNER AS NOTED.
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or GE Appliances product questions, In.of water & Electric Ot. Art visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
In.of water & Electric Ot. Art
Listed by Underwriters Laboratories
Specification Revised 12/15
PZS23KPE
GE Profile™ Series 23.3 Cu. Ft. Counter-Depth Side-By-Side Refrigerator FEATURES AND BENEFITS ounter-depth design – Offers a built-in look by fitting nearly flush with C surrounding cabinetry 70" tall Integrated shelf support system – Provides strong, flexible support Adjustable slide-out, spillproof glass shelves – Raised edges help contain spills and make cleanup quick and easy
Freezer Temp Fridge Temp
Set Features
REFRIGERATOR
FREEZER F
F
Door Alarm On TurboCool On Replace Water Filter
On/Off
0°F is Recommended for Freezer 37°F is Recommended for Fridge
Water
Crushed
Cubed
Lock Controls
Light
djustable Clear Look door bins – Offer ideal space for storing large containers A in the door and free up valuable space In-the-door beverage rack – Beverages are chilled and ready without taking up valuable space Tilt-out freezer bins – Rotate forward for convienient access Quick Ice setting – Creates ice up to 50% faster than normal settings Turbo Cool setting – Drops interior temperature to maintain freshness after frequent openings Advanced filtration – Removes trace pharmaceuticals from water and ice* and uses replacement filter MWF (*Removes ibuprofen, atenolol, fluoxetine, progesterone and trimethoprim. These pharmaceuticals are not necessarily in all users’ water.) Model PZS23KPEWV – White Model PZS23KPEBV – Black
UFAS COMPLIANT
Specification Revised 12/15
